|
DIN 1623-2 |
Steel flat products; cold reduced sheet and strip; technical delivery conditions; general purpose structural steels |
|
DIN ISO 8062 |
Castings - System of dimensional tolerances and machining allowances (ISO 8062:1994) |
|
DIN EN 10204 |
Metallic products - Types of inspection documents |
|
DIN EN 10025-1 |
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
|
DIN EN 10060 |
Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions |
|
DIN EN 10025-2 |
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels |
|
DIN EN 10130 |
Cold-rolled low carbon steel flat products for cold forming - Technical delivery conditions (includes Amendment A1:1998) |
|
DIN 6930-2 |
Steel stampings; general tolerances |
|
DIN EN 10084 |
Case hardening steels - Technical delivery conditions |
|
DIN 50602 |
Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions |
|
DIN EN 10045-1 |
Charpy impact test on metallic materials; test method (English version of DIN EN 10045 Part 1) |
|
DIN EN 10130 |
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
|
DIN EN 10278 |
Dimensions and tolerances of bright steel products |
|
DIN EN 10131 |
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
|
DIN EN 1563 |
Founding - Spheroidal graphite cast irons |
|
DIN EN 1706 |
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
|
DIN EN 10025-3 |
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
|
DIN EN 10029 |
Hot rolled steel plate 3 mm thick or above; tolerances on dimensions, shape and mass (English version of DIN EN 10029) |
|
DIN EN 10045-2 |
Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992 |
|
DIN EN 10088-1 |
Stainless steels - Part 1: List of stainless steels |
|
DIN EN 10111 |
Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
|
DIN EN 10149-1 |
Hot-rolled products made of high yield strength steels for cold forming - General delivery conditions |
|
DIN EN 10149-2 |
Hot-rolled products made of high yield strength steels for cold forming - Delivery conditions for thermomechanically rolled steels |
|
DIN EN 10149-3 |
Hot-rolled products made of high yield strength steels for cold forming - Delivery conditions for normalized or normalized rolled steels |
|
DIN 55928-8 |
Corrosion protection of steel structures by the application of organic or metallic coatings - Corrosion protection of thin-walled structural members |
|
DIN EN 10051 |
Continuously hot rolled uncoated unalloyed and alloy steel plate, sheet and strip - Tolerances on dimensions and shape (includes Amendment A1:1997) |
|
DIN EN 10088-2 |
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
|
DIN EN 10139 |
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions |
|
DIN EN 10210-2 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
|
DIN EN 10263-1 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions; English version of DIN EN 10263-1 |
|
DIN EN 10270-2 |
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire; English version of DIN EN 10270-2 |
|
DIN EN 1561 |
Founding - Grey cast iron |
|
DIN 1688-4 |
Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances |
|
DIN 50018 |
Sulfur dioxide corrosion testing in a saturated atmosphere |
|
DIN 50125 |
Testing of metallic materials - Tensile test pieces |
|
DIN EN 10025-5 |
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
|
DIN EN 10058 |
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
DIN EN 10083-1 |
Steels for quenching and tempering - Part 1: General technical delivery conditions |
|
DIN EN 10083-2 |
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
|
DIN EN 10087 |
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
|
DIN EN 10088-3 |
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
|
DIN EN 10216-2 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
DIN EN 10263-4 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering; English version of DIN EN 10263-4 |
|
DIN EN 573-3 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition |
|
DIN EN 754-1 |
Aluminium and aluminium alloy cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
|
DIN 1683-1 |
Rough castings - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 17611 |
Anodized wrought aluminium and aluminium alloys semi-finished products - Technical delivery conditions |
|
DIN 50969 |
Testing of high-strength steel building elements for resistance to hydrogen-induced brittle fracture and advice on the prevention of such fracture |
|
DIN 59220 |
Hot-rolled embossed steel plate - Dimensions, mass and tolerances |
|
DIN EN 10002-1 |
Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; English version of DIN EN 10002-1:2001 |
|
DIN EN 10025-6 |
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
|
DIN EN 10132-4 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications |
|
DIN EN 10219-2 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
|
DIN EN 10250-2 |
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
|
DIN EN 10277-1 |
Bright products - Technical delivery conditions - Part 1: General |
|
DIN EN 10277-2 |
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes |
|
DIN EN 485-2 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
|
DIN EN ISO 18265 |
Metallic materials - Conversion of hardness values (ISO 18265:2003) |
|
DIN EN ISO 20482 |
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003) |
|
DIN 488-1 |
Reinforcing steels; grades, properties, marking |
|
DIN 488-2 |
Reinforcing steel; reinforcing steel bars; dimensions and masses |
|
DIN 488-4 |
Reinforcing steel; reinforcing steel fabric and wire; design, dimensions and masses |
|
DIN 488-6 |
Reinforcing steel; inspection |
|
DIN 488-7 |
Reinforcing steel; verification of weldability of reinforcing steel bars; test procedure and evaluation |
|
DIN 50113 |
Testing of metals; Rotating bar bending fatigue test |
|
DIN 50905-1 |
Corrosion of metals; corrosion testing; principles |
|
DIN 5512-2 |
Steels for use in rail vehicle construction - Part 2: Unalloyed steels for cold-rolled flat products up to 3 mm thick |
|
DIN 59200 |
Hot rolled wide steel flats - Dimensions, mass and tolerances |
|
DIN 7527-1 |
Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Discs |
|
DIN EN 10020 |
Definition and classification of grades of steel; English version ofDIN EN 10020 |
|
DIN EN 10028-7 |
Flat products made of steels for pressure purposes - Part 7: Stainless steels; English version of DIN EN 10028-7 |
|
DIN EN 10080 |
Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
|
DIN EN 10083-3 |
Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels |
|
DIN EN 10132-1 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; English version of DIN EN 10132-1 |
|
DIN EN 10210-1 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
DIN EN 10217-1 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
DIN EN 10219-1 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
DIN EN 10243-1 |
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; English version of DIN EN 10243-1 |
|
DIN EN 10250-1 |
Open die steel forgings for general engineering purposes - Part 1: General requirements |
|
DIN EN 10250-3 |
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
|
DIN EN 10270-1 |
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire; English version of DIN EN 10270-1 |
|
DIN EN 10277-3 |
Bright steel products -Technical delivery conditions - Part 3: Free-cutting steels |
|
DIN EN 10297-1 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
|
DIN EN 1559-6 |
Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
|
DIN EN 1654 |
Copper and copper alloys - Strip for springs and connectors |
|
DIN EN 754-2 |
Aluminium and aluminium alloy cold drawn rod/bars and tube - Part 2: Mechanical properties |
|
DIN EN 754-4 |
Aluminium and aluminium alloy cold drawn rod/bar and tube - Square bars: tolerances on dimensions and form |
|
DIN EN ISO 6507-4 |
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2005) |
|
DIN EN ISO 7500-1 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004) |
|
DIN 1022 |
Bars made hot-rolled square-edged steel equal angles (LS-steel bars) - Dimensions and mass |
|
DIN 1025-1 |
Hot rolled steel I and H sections - Sections with narrow taper flange (I series) - Dimensions, mass and static parameters |
|
DIN 1025-2 |
Hot rolled I and H sections (IPB series) - Dimensions, mass and static parameters |
|
DIN 1025-3 |
Hot rolled I and H sections (IPBl series); dimensions, mass and static parameters |
|
DIN 1025-4 |
Hot rolled I and H sections (IPBv series); dimensions, mass and static parameters |
|
DIN 1025-5 |
Hot rolled I and H sections (IPE series); dimensions, mass and static parameters |
|
DIN 1026-1 |
Hot-rolled steel channels with taper flanges - Dimensions, mass and static parameters |
|
DIN 1026-2 |
Hot-rolled steel channels with parallel flanges - Part 2: Dimensions, masses and static parameters |
|
DIN 1367-1 |
Seal Wires of Galvanized Steel Wire |
|
DIN 1653 |
Surface Condition of Commercial Steel Wires; Denominations and Abbreviations thereof |
|
DIN 1685-1 |
Rough castings of spheroidal graphite cast iron - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 1688-3 |
Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances |
|
DIN 17007-4 |
Material Numbers; System of the Principal Groups 2 and 3: Non-ferrous Metals |
|
DIN 17560-1 |
Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon |
|
DIN 17560-2 |
Ferrosilicon and Silicon - Part 2: Technical delivery conditions for silicon |
|
DIN 17751 |
Wrought nickel and nickel alloy pipes and tubes - Requirments and testing |
|
DIN 17861 |
Seamless circular titanium and titanium alloy tubes; technical delivery conditions |
|
DIN 50115 |
Notched bar impact testing of metallic materials using test pieces other than ISO test pieces |
|
DIN 50141 |
Testing of metals; Shear test |
|
DIN 50142 |
Testing of metallic materials; Flat bending fatigue test |
|
DIN 50600 |
Testing of metallic materials; Metallographic Micrographs; Picture scales and formats |
|
DIN 50929-1 |
Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general |
|
DIN 50929-2 |
Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings |
|
DIN 50930-6 |
Corrosion behaviour of metalic materials in contact with water - Part 6: Effects on drinking water quality |
|
DIN 5512-1 |
Steels for use in rail vehicle construction - Part 1: Hot-rolled, unalloyed structural steels and hot-rolled structural steels with improved atmospheric corrosion resistance |
|
DIN 5512-3 |
Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard |
|
DIN 5512-4 |
Steels for use in rail vehicle construction - Fine-grain structural steels |
|
DIN 59231 |
Hot-dip metal coated corrugated and profiled steel sheets - Dimensions, masses and static parameters |
|
DIN 7523-2 |
Steel forgings; design of drop and press forgings; machining allowances, drafts, edge radii, fillet radii, base thicknesses, wall thicknesses, rib widths, and rib radii |
|
DIN 7527-2 |
Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Pierced Discs |
|
DIN 7527-3 |
Steel Forgings; Machining Allowances and Permissble Variations for Seamless Open-die Forged Rings |
|
DIN 7527-4 |
Steel Forgings; Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes |
|
DIN 7527-5 |
Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Rolled and Welded Rings |
|
DIN 7527-6 |
Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Bars |
|
DIN 81249-1 |
Corrosion of metals in sea water and sea atmosphere - Part 1: Definitions, basic information |
|
DIN 81249-2 |
Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water |
|
DIN 81249-3 |
Corrosion of metals in sea water and sea atmosphere - Part 3: Galvanic corrosion in sea water |
|
DIN 81249-4 |
Corrosion of metals in sea water and sea atmosphere - Part 4: Corrosion in sea atmosphere |
|
DIN 997 |
Tracing Dimensions for Bars and Rolled Steel Sections |
|
DIN EN 10027-1 |
Designation systems for steels - Part 1: Steel names |
|
DIN EN 10027-2 |
Designation systems for steel; numerical system (Enlish version of DIN EN 10027 Part 2) |
|
DIN EN 10028-2 |
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
|
DIN EN 10048 |
Hot rolled narrow steel strip - Dimensional and geometrical tolerances |
|
DIN EN 10085 |
Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
|
DIN EN 10143 |
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
|
DIN EN 10216-1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
DIN EN 10217-2 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
|
DIN EN 10218-2 |
Steel wire and wire products: General - Wire dimensions and tolerances |
|
DIN EN 10250-4 |
Open die steel forgings for general engineering purposes - Part 4: Stainless steels; English version of DIN EN 10250-4 |
|
DIN EN 10254 |
Steel closed die forgings - General technical delivery conditions; English version of DIN EN 10254 |
|
DIN EN 10263-2 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working; English version of DIN EN 10263-2 |
|
DIN EN 10263-5 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels; English version of DIN EN 10263-5 |
|
DIN EN 10269 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02) |
|
DIN EN 10277-4 |
Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels |
|
DIN EN 10277-5 |
Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering |
|
DIN EN 12164 |
Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); English version of DIN EN 12164:1998 + A1:2000 |
|
DIN EN 12680-1 |
Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
|
DIN EN 12680-3 |
Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings |
|
DIN EN 12844 |
Zinc and zinc alloys - Castings - Specifications |
|
DIN EN 1369 |
Founding - Magnetic particle inspection |
|
DIN EN 1370 |
Founding - Surface roughness inspection by visualtactile comparators |
|
DIN EN 1371-1 |
Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings |
|
DIN EN 1371-2 |
Founding - Liquid penetrant inspection - Part 2: Investment castings; German version EN 1371-2:1998 |
|
DIN EN 1559-1 |
Founding - Technical conditions of delivery - Part 1: General |
|
DIN EN 1559-3 |
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
|
DIN EN 1559-4 |
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
|
DIN EN 1559-5 |
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
|
DIN EN 506 |
Roofing products from metal sheet - Specification for self-supporting products of copper or zinc sheet; English version of DIN EN 506 |
|
DIN EN 508-3 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; English version of DIN EN 508-3 |
|
DIN EN 573-1 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
|
DIN EN 573-2 |
Chemical composition and form of aluminium and aluminium alloy wrought products - Chemical symbol based designation system |
|
DIN EN 573-4 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
|
DIN EN 576 |
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
|
DIN EN 754-3 |
Aluminium and aluminium alloy cold drawn rod/bar and tube - Round bars: tolerances on dimensions and form |
|
DIN EN 754-5 |
Aluminium and aluminium alloy cold drawn rod/bar and tube - Rectangular bars: tolerances on dimensions and form |
|
DIN EN 754-6 |
Aluminium and aluminium alloy cold drawn rod/bar and tube - Hexagonal bars: tolerances on dimensions and form |
|
DIN EN 754-7 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
|
DIN EN 755-2 |
Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
|
DIN EN 755-4 |
Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Square bars: tolerances on dimensions and form |
|
DIN EN 755-7 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
|
DIN EN 988 |
Specifications for zinc and zinc alloy rolled flat products for building |
|
DIN EN ISO 2566-1 |
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
|
DIN EN ISO 6506-1 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005) |
|
DIN EN ISO 6508-2 |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005) |
|
DIN EN ISO 683-17 |
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999); English version of DIN EN ISO 683-17 |
|
DIN EN ISO 7438 |
Metallic materials - Bend test (ISO 7438:2005) |
|
DIN EN ISO 7539-1 |
Stress corrosion testing - General guidance on testing procedures (ISO 7539-1:1987) |
|
DIN EN ISO 8493 |
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
|
DIN 1027 |
Bars made of hot rolled steel Zee sections with rounded roots adn toes - Dimensions, mass and static parameters |
|
DIN 1581 |
Steel Bars; Hinge Strip Profiles; Dimensions, Weights |
|
DIN 1599 |
Identification Markings for Steel |
|
DIN 1684-1 |
Rough castings of malleable iron - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 1686-1 |
Rough castings of grey cast iron - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 1687-1 |
Rough castings of heavy metal alloys produced by sand casting - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 1687-4 |
Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances |
|
DIN 1688-1 |
Rough castings of light metal alloys produced by sand casting - General tolerances and machining allowances (For replacement purposes only) |
|
DIN 1702 |
Nickel Anodes |
|
DIN 17115 |
Steels for welded round link chains; technical delivery conditions |
|
DIN 1729-1 |
Wrought magnesium alloys |
|
DIN 1742 |
Tin Alloys for Pressure; Die Castings |
|
DIN 17471 |
Resistance alloys |
|
DIN 17561 |
Ferromolybdenum - Technical delivery conditions |
|
DIN 17562 |
Ferrotungsten - Technical delivery conditions |
|
DIN 17563 |
Ferrovanadium - Technical delivery conditions |
|
DIN 17564 |
Ferromanganese, Ferromanganese-Silicon and Manganese - Technical delivery conditions |
|
DIN 17565 |
Ferro-Chromium, Ferro-Chromium-Silicon and Chromium - Technical delivery conditions |
|
DIN 17566 |
Ferrotitanium - Technical delivery conditions |
|
DIN 17567 |
Ferroboron - Technical delivery conditions |
|
DIN 17569 |
Ferroniobium - Technical delivery conditions |
|
DIN 17580 |
Calcium-Silicon - Technical delivery conditions |
|
DIN 17640-1 |
Lead alloys for general purposes |
|
DIN 17740 |
Wrought nickel |
|
DIN 17742 |
Wrought nickel-chromium alloys - Chemical composition |
|
DIN 17743 |
Wrought nickel-copper alloys - Chemical composition |
|
DIN 17744 |
Wrought nickel-chromium-molybdenum alloys - Chemical composition |
|
DIN 17745 |
Wrought nickel-iron alloys - Chemical composition |
|
DIN 17750 |
Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
|
DIN 17752 |
Wrought nickel and nickel alloy rod and bars - Requirements and testing |
|
DIN 17753 |
Wrought nickel and nickel alloy wire - Requirements and testing |
|
DIN 17850 |
Titanium; chemical composition |
|
DIN 17851 |
Titanium alloys; chemical composition |
|
DIN 17860 |
Titanium and titanium alloy plate, sheet and strip; technical delivery conditions |
|
DIN 17862 |
Titanium and titanium alloy bars - Technical delivery conditions |
|
DIN 17863 |
Wire of Titanium |
|
DIN 17864 |
Titanium and wrought titanium alloy forgings (hammer forgings and drop forgings) - Technical delivery conditions |
|
DIN 17865 |
Titanium and titanium alloy investment castings and rammed graphite castings; technical delivery conditions |
|
DIN 17869 |
Material properties of titanium and titanium alloys; additional data |
|
DIN 18807-9 |
Trapezoidal aluminium sheeting and connections in building - Part 9: Structural detailing and installation |
|
DIN 30999 |
Calibration of hardmetal standard test blocks for verifying and calibrating Rockwell hardness testing machines (scales A and 45N) |
|
DIN 4000-23 |
Tabular layouts of article characteristics for iron and steel |
|
DIN 40501-2 |
Aluminium for use in electrical engineering - Part 2: Tubes, rods, bars and sections - Technical delivery conditions |
|
DIN 46406-1 |
Binding Wires for Electrical Machines; Magnetic Steel Wire, Drawn and Tinned |
|
DIN 46406-2 |
Binding Wires for Electrical Machines; Non-magnetic Steel Wire, Drawn and Tinned |
|
DIN 46420 |
Round Aluminium Wires for Electrical Purposes, Drawn; Dimensions |
|
DIN 46424 |
Switchgear; Extruded Channel Sections of Aluminium for Busbars |
|
DIN 46425 |
Round Aluminium Wires for Electrical Purposes, Exactly Drawn; Dimensions |
|
DIN 46431 |
Round Copper Wires for Electrical Purposes; Precision Drawn, Dimensions |
|
DIN 50103-3 |
Rockwell hardness testing of metallic materials - Part 3: Modified Rockwell scales Bm and Fm (for thin sheet steel) |
|
DIN 50106 |
Testing of Metallic Materials; Compression Test |
|
DIN 50131 |
Testing of Metallic Materials; Determination of Shrinkage |
|
DIN 50162 |
Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test |
|
DIN 50463 |
Testing of steel; determination of the density of iron/silicon alloy magnetic sheet |
|
DIN 50502 |
Chemical analysis of copper and copper alloys - Determination of copper in unalloyed copper containing not less than 99,90 % of copper |
|
DIN 50503 |
Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys |
|
DIN 50511 |
Determination of phosphorus content of copper and copper alloys by the molybdovanadate spectrometric method |
|
DIN 50905-2 |
Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack |
|
DIN 50905-3 |
Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress |
|
DIN 50905-4 |
Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress |
|
DIN 50915 |
Testing the resistance of unalloyed and low-alloy steels to intergranular stress corrosion cracking caused by exposure to corrosive agents |
|
DIN 50916-2 |
Testing of copper alloys; stress corrosion cracking test using ammonia; testing of components |
|
DIN 50920-1 |
Corrosion of metals; corrosion testing in flowing liquids; general |
|
DIN 50926 |
Impressed current cathodic corrosion protection in the bottom zone of unalloyed steel fuel oil storage tanks |
|
DIN 50927 |
Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection) |
|
DIN 50928 |
Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents |
|
DIN 50929-3 |
Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components |
|
DIN 50931-1 |
Corrosion testing of drinking water distribution systems - Part 1: Determining changes to the composition of drinking water |
|
DIN 50934-1 |
Methods for evaluation of effectiveness of water treatment equipment for corrosion control - Part 1: General |
|
DIN 50934-2 |
Methods for evaluation of effectiveness of water treatment equipment for corrosion control - Part 2: Equipment for reducing the release of corrosion products into drinking water |
|
DIN 50934-3 |
Methods for evaluation of effectiveness of water treatment equipment for corrosion control - Part 3: Field testing of equipment for removing scale |
|
DIN 50934-4 |
Methods for evaluation of effectiveness of water treatment equipment for corrosion control - Part 4: Laboratory testing of equipment for removing scale |
|
DIN 50958 |
Modified corrodkote test for electrodeposited coatings |
|
DIN 51211 |
Testing of Metallic Materials; Reverse Bend Test of Wires |
|
DIN 51212 |
Testing of Metallic Materials; Torsion Test of Wires |
|
DIN 51214 |
Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens |
|
DIN 51215 |
Testing of Metallic Materials; Wrapping Test for Wires; General Information |
|
DIN 51222 |
Pendulum impact testing machines with a rated initial potential energy of 50 J or less - Requirements and verification |
|
DIN 536-1 |
Crane rails; hot rolled flat bottom crane rails (type A); dimensions, section parameters and steel grades |
|
DIN 536-2 |
Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades |
|
DIN 54123 |
Non-destructive Test; Ultrasonic Method of Testing Claddings, Produced by Welding, Rolling and Explosion |
|
DIN 59051 |
Bars made of hot rolled square-edged steel T sections - Dimensions and mass |
|
DIN 59350 |
Precision flat and square steel bars; Dimensions, weights, permissible deviations |
|
DIN 59370 |
Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights |
|
DIN 59610 |
Lead and lead alloys - Rolled lead sheet for general purposes |
|
DIN 59740 |
Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form |
|
DIN 6880 |
Bright Key Steel; Dimensions, Permissible Variations, Weights |
|
DIN 9711-1 |
Magnesium Extruded Sections; Technical Conditions of Delivery |
|
DIN 9711-2 |
Magnesium Extruded Sections; Design |
|
DIN 9711-3 |
Magnesium Extruded Sections; Permissible Variations |
|
DIN 9715 |
Magnesium semi-finished products; Properties |
|
DIN 998 |
Hole Pitches in Unequal Angle Steels |
|
DIN 999 |
Hole Pitches in Equal Steel Angles |
|
DIN EN 10002-5 |
Tensile testing of metallic materials; method of test at elevated temperature (English version of DIN EN 10002 Part 2) |
|
DIN EN 10028-1 |
Flat products made of steels for pressure purposes - Part 1: General requirements (includes Amendment A1:2002) |
|
DIN EN 10028-3 |
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
DIN EN 10028-4 |
Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties |
|
DIN EN 10028-5 |
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
|
DIN EN 10028-6 |
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
|
DIN EN 10034 |
Structural steel I and H sections; tolerances on shape and dimensions |
|
DIN EN 10059 |
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
DIN EN 10092-1 |
Hot rolled spring steel flat bars - Part 1: Flat bars; Dimensions and tolerances on shape and dimensions |
|
DIN EN 10092-2 |
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves, dimensions and tolerances on shape and dimensions |
|
DIN EN 10120 |
Steel sheet and strip for welded gas cylinders |
|
DIN EN 10132-2 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 2: Case hardening steels; English version of DIN EN 10132-2 |
|
DIN EN 10151 |
Stainless steel strip for springs - Technical delivery conditions |
|
DIN EN 10152 |
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
|
DIN EN 10162 |
Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
|
DIN EN 10163-1 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements |
|
DIN EN 10163-2 |
Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
|
DIN EN 10163-3 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
|
DIN EN 10168 |
Steel products - Inspection documents - List of information and description |
|
DIN EN 10205 |
Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel (English version of DIN EN 10205) |
|
DIN EN 10209 |
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
|
DIN EN 10213-1 |
Technical delivery conditions for steel castings for pressure purposes - General |
|
DIN EN 10216-3 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
DIN EN 10216-4 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
DIN EN 10216-5 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
DIN EN 10217-7 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
DIN EN 10225 |
Weldable structural steels for fixed offshore structures - Technical delivery conditions; English version of DIN EN 10225 |
|
DIN EN 10228-1 |
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
|
DIN EN 10228-3 |
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
|
DIN EN 10243-1 Berichtigung 1 |
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; Corrigenda to DIN EN 10243-1:2000-06 |