DIN EN 1541

Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract; English version of DIN EN 1541

DIN 7756

Valves for Vehicle Tyres; Valve Screw Threads; Theoretical Values, Limiting Dimensions of Screw Threads

DIN 53505

Shore A and Shore D hardness testing of rubber

DIN EN ISO 176

Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005)

DIN EN ISO 178

Plastics - Determination of flexural properties (ISO 178:2001 + AMD 1:2004)

DIN ISO 34-1

Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2004)

DIN 53295

Testing of sandwiches; Peel test by means of a drum

DIN 53504

Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values of rubber in a tensile test

DIN EN 522

Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification

DIN ISO 1629

Rubber and latices - Nomenclature (ISO 1629:1995)

DIN ISO 3302-1

Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)

DIN 1082-4

Refractory materials; refractory arch bricks for use in rotary kilns; dimensions

DIN 16945

Testing of resins, hardeners and accelerators, and catalyzed resins

DIN 51032

Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs

DIN 53124

Determining the pH of aqueous extracts of paper, board and pulp

DIN 53508

Accelerated ageing of rubber

DIN 53509-2

Resistance of rubber to ozone cracking - Reference methods for determining ozone concentration in laboratory test chambers

DIN 53529-1

Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles

DIN 7708-1

Plastic Moulding Materials; Plastic Products; Concepts

DIN 7865-1

Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions

DIN 7865-2

Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing

DIN EN 1013-1

Light-transmitting profiled plastic sheeting for single skin roofing - Part 1: General requirements and test methods

DIN EN 1799

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surfaces

DIN EN ISO 1043-1

Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001)

DIN EN ISO 1183-1

Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004)

DIN EN ISO 172

Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978)

DIN EN ISO 175

Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); English version of DIN EN ISO 175

DIN EN ISO 1874-1

Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992); English version of DIN EN ISO 1874-1

DIN EN ISO 2555

Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)

DIN EN ISO 483

Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)

DIN EN ISO 527-1

Plastics -General principles for the determination of tensile properties (ISO 527-1:1993 + Corr 1:1994)

DIN EN ISO 527-2

Determination of tensile properties of plastics - Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr 1:1994)

DIN ISO 127

Rubber, natural latex concentrate - Determination of KOH number (ISO 127:1995)

DIN ISO 3302-2

Rubber - Tolerances for products - Part 2: Geometrical tolerances (ISO 3302-2:1998)

DIN ISO 48

Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)

DIN 1081

Refractory materials; rectangular refractory bricks; dimensions

DIN 1082-1

Refractory materials; refractory arch bricks; dimensions

DIN 1082-2

Refractory materials; refractory skewbacks; dimensions

DIN 1082-3

Refractory materials; basic arch bricks and refractory bricks for oxygen steel-making converters and arc furnaces; dimensions

DIN 12116

Testing of glass - Resistance to attack by a boiling aqueous solution of hydrochloric acid - Method of test and classification

DIN 1249-10

Glass for use in building construction; chemical and physical properties

DIN 16749

Compression moulds and injection moulds; dimensional tolerances for moulding parts

DIN 16780-2

Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties

DIN 16781-2

Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties

DIN 16782-1

Polytetrafluoroethylene (PTFE) moulding materials; classification and designation

DIN 16782-2

Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties

DIN 16783-2

Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties

DIN 16830-1

High impact polyvinyl chloride (PVC-HI) window profiles; testing

DIN 16830-2

High impact white polyvinyl chloride (PVC-HI) window profiles; requirements

DIN 16906

Testing of plastic sheeting and films; sample and specimen preparation and conditioning

DIN 16927

Unplasticized polyvinyl chloride sheet; technical delivery conditions

DIN 16941

Thermoplastics extruded profiles; general tolerances of size, form and orientation

DIN 16946-2

Cured casting resins; types

DIN 16970

Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings

DIN 16972

Compression-moulded polyethylene (PE) sheets - Technical delivery conditions

DIN 16980

Thermoplastics rods; dimensions

DIN 16985

Semi-finished thermoplastics products; technical delivery conditions

DIN 16986

Thermoplastics flat bars; dimensions

DIN 18157-3

Application of ceramic tiling by the thin bed method using epoxy resin adhesives

DIN 18159-2

Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing

DIN 18820-1

Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Structure, fabrication and properties

DIN 18820-2

Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Characteristic values of standard composites

DIN 18820-3

Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Protection of structural layer

DIN 18820-4

Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Testing and inspection

DIN 198

Trimmed Sizes of Paper according to DIN 476; Examples for Application of the A Series

DIN 281

Adhesives for parquet flooring - Requirements, testing and application

DIN 40604-1

Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes

DIN 476-2

Trimmed sizes of paper - C series

DIN 51068-1

Testing of ceramic materials; Determination of Resistance to Thermal Shock; Water quenching method for refractory bricks

DIN 51075-1

Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content

DIN 51075-2

Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content

DIN 51075-3

Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content

DIN 51075-4

Testing of ceramic materials; chemical analysis of silicon carbide; determination of the free silicon content

DIN 51075-5

Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content

DIN 51076-1

Determination of silicon carbide in ceramic materials containing oxidic constituents and binders

DIN 51078

Preparation of refractory samples for chemical analysis and determining the change in mass on drying

DIN 51079-1

Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid

DIN 51079-2

Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid

DIN 51083-1

Chemical analysis of fine ceramic aluminosilicates - General information and test report

DIN 51083-11

Determination of barium oxide (BaO) and strontium oxide (SrO) in fine ceramic aluminosilicates by atomic absorption spectrometry

DIN 51083-2

Determination of silicon(IV) oxide in fine ceramic aluminosilicates

DIN 51083-3

Testing of ceramic materials - Chemical analysis of alumosilicates - Part 3: Decomposition methods

DIN 51083-5

Determination of titanium(IV) oxide in fine ceramic alumosilicates

DIN 51083-7

Determination of calcium oxide in fine ceramic aluminosilicates

DIN 51083-8

Determination of magnesium oxid in fine ceramic aluminosilicates by atomic absorption specrometry

DIN 51086-1

Determination of boron trioxide in oxidic materials for ceramics, glass and glazes

DIN 52241-1

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; general information and test report

DIN 52241-2

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; digestion method

DIN 52241-3

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of silicon(IV)oxide

DIN 52241-4

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of aluminium oxide

DIN 52241-5

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of total iron content calculated as iron(III)oxide

DIN 52241-6

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of titanium(IV)oxide

DIN 52241-7

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of manganese content calculated as MnO

DIN 52241-8

Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of calcium oxide and magnesium oxide

DIN 52338

Methods of testing flat glass for use in buildings; ball drop test on laminated glass

DIN 52924-2

Determination of extractable constituents of paper and board - Soluble constituents

DIN 53107

Determining the smoothness of paper and board by the Bekk method

DIN 53118

Determination of equilibrium moisture content of paper and board in a stack or in a reel

DIN 53120-1

Determination of medium-range air permeance of paper and board by the Bendtsen method

DIN 53120-2

Testing of Paper and Board; Determination of Air Permeability; Method for Medium Rates of Air Permeability according to Schopper

DIN 53122-1

Determination of the water vapour transmission rate of plastic film, rubber sheeting, paper, board and other sheet materials by gravimetry

DIN 53125

Determining the chloride content in aqueous extracts of paper and board

DIN 53291

Testing of sandwiches; Compression test perpendicular to the faces

DIN 53292

Testing of sandwiches; Tensile test perpendicular to the faces

DIN 53293

Testing of sandwiches; Bending test

DIN 53294

Testing of sandwiches; Shear test

DIN 53362

Determining the flexural rigidity of plastic film and woven textile fabrics with or without plastic coating by the cantilever method

DIN 53363

Determining the tear resistance of plastic film and sheeting by the trouser tear method

DIN 53373

Testing of Plastic Films; Impact Penetration Test with Electronic Data Recording

DIN 53377

Testing of Plastic Films; Determination of Dimensional Stability

DIN 53380-1

Determining the gas transmission rate of plastic film by the volumetric method

DIN 53380-3

Determining the gas transmission rate of plastic film, sheeting and mouldings by the carrier gas method

DIN 53393

Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals

DIN 53408

Testing of Plastics; Determination of Solubility Temperature of Polyvinyl Chloride (PVC) in Plasticizers

DIN 53423

Testing of Rigid Cellular Materials; Flexural Test

DIN 53424

Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load

DIN 53428

Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids

DIN 53430

Testing of Rigid Cellular Materials; Tensile Test

DIN 53435

Testing of plastics; bending test and impact test on dynstat test pieces

DIN 53442

Flexural fatique testing of plastics using flat specimens

DIN 53463

Testing of Laminates; Splitting Test on Laminated Sheets

DIN 53464

Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials

DIN 53465

Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials

DIN 53470

Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials

DIN 53497

Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing

DIN 53498

Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials

DIN 53512

Determination the rebound resilience of rubber using the Schob pendulum

DIN 53513

Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies

DIN 53523-2

Determination of Mooney viscosity of rubber; test apparatus

DIN 53523-3

Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Mooney Viscosity

DIN 53523-4

Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Scorching Behaviour

DIN 53529-2

Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics

DIN 53531-2

Determination of the adhesion of rubber to rigid materials using conical ended cylinders

DIN 53534

Determing the linear dimensions of rubber test pieces and products

DIN 53536

Determination of permeability of rubber to gases

DIN 53543

Testing of Semi-Rigid Polyurethane (PUR) Integral Cellular Materials; Materials for Soles and Parts of Shoes

DIN 53545

Determination of low-temperature behaviour of elastomers; principles and test methods

DIN 53563

Determination of total solids content of latex

DIN 53715

Determination of water content of plastics by the Karl Fischer method

DIN 53728-3

Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution

DIN 53733

Testing of Plastics; Size Reduction of Plastic Products for Test Purposes

DIN 53741

Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method

DIN 53742

Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method

DIN 53748

Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials

DIN 53749

Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State

DIN 54357

Testing of Pulp; Determination of the Kappa Number

DIN 54455

Testing of adhesives for metals and of bonded metal joints; torsional shear test

DIN 54600-8

Testing of paper and board; Testing for antimicrobial additives; Determination of the methylene-bis-thioscyanate content

DIN 54603

Testing of paper, boxboard and paper board; Determination of glyoxal content

DIN 54802-1

Determining the absorption of hot plasticizers by polyvinyl chlorides (PVCs) using the planetary mixer method

DIN 54802-2

Determining the absorption of hot plasticizers by polyvinyl chlorides (PVCs) using the static method

DIN 54811

Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer

DIN 54836

Testing of combustible materials; determination of ignition temperature

DIN 55468-1

Corrugated fibreboard - Part 1: Requirements and testing

DIN 55468-2

Wet strength corrugated fibreboard - Part 2: Requirements and testing

DIN 6723-1

90 g/m² paper for use in optical character recognition systems - Requirements and testing - Uncoated, untreated paper

DIN 6723-2

90 g/m² paper for use in optical character recognition systems - Requirements and testing - Coated, treated, carbonless copy paper

DIN 6724-1

65 to 85 g/m² paper for use in optical character recognition systems - Requirements and testing - Uncoated, untreated paper

DIN 6724-2

65 to 85 g/m² paper for use in optical character recognition systems - Requirements and testing - Coated, treated, carbonless copy paper

DIN 6735

Paper, board and pulps - Survey of terms and definitions

DIN 7708-4

Types of plastics moulding compounds; Moulding compounds for cold moulding

DIN 7712

Hard Rubber Sheets

DIN 7737

Laminated Products; Vulcanized Fibre, Types

DIN 7738

Laminated Products; Vulcanized Fibre, Acceptance, Test Methods

DIN 7742-2

Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties

DIN 9771

Papers for Data Processing; Papers for Continuous Forms; Dimensions

DIN EN 1013-2

Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP)

DIN EN 1013-3

Light-transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)

DIN EN 1013-4

Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets; English version of DIN EN 1013-4

DIN EN 1013-5

Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethycrylate (PMMA) sheets; English version of DIN EN 1013-5

DIN EN 1063

Glass in building - Security glazing - Testing and classification of resistance against bullet attack; English version of DIN EN 1063

DIN EN 1094-4

Insulating refractory products - Determination of bulk density and true porosity

DIN EN 1094-6

Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987, modified)

DIN EN 12192-2

Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents

DIN EN 12645

Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing

DIN EN 12701

Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials; English version of DIN EN 12701

DIN EN 1279-2

Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration

DIN EN 13035-11

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

DIN EN 13035-9

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

DIN EN 1323

Adhesives for tiles - Concrete slabs for testing (includes Amendment A1:1998)

DIN EN 13733

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding

DIN EN 14022

Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives

DIN EN 1748-2-1

Glass in building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties

DIN EN 549

Rubber materials for seals and diaphragms for and gas equipment

DIN EN 843-4

Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness

DIN EN 955-2

Chemical analysis of refractory products - Products containing silica and/or alumina (wet method)

DIN EN 993-10

Methods of testing dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating

DIN EN 993-12

Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness)

DIN EN 993-14

Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method

DIN EN 993-7

Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures

DIN EN 993-9

Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression

DIN EN ISO 10964

Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993)

DIN EN ISO 1133

Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)

DIN EN ISO 11339

Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2003)

DIN EN ISO 11469

Plastics - Generic identification and marking of plastics products (ISO 11469:2000); English version of DIN EN ISO 11469

DIN EN ISO 1183-2

Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)

DIN EN ISO 14125

Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)

DIN EN ISO 14910-2

Plastics -Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:1997)

DIN EN ISO 1675

Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)

DIN EN ISO 177

Plastics - Determination of migration of plasticizers (ISO 177:1988)

DIN EN ISO 186

Paper and board - Sampling to determine average quality (ISO 186:2002)

DIN EN ISO 2114

Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000)

DIN EN ISO 2114 Berichtigung 1

Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); Corrigendum 1 to English version of DIN EN ISO 2114:2002-06

DIN EN ISO 2440

Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)

DIN EN ISO 2535

Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001)

DIN EN ISO 2580-1

Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)

DIN EN ISO 3001

Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999)

DIN EN ISO 3251

Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003)

DIN EN ISO 3915

Measurement of resistivity of conductive plastics (ISO 3915:1981)

DIN EN ISO 4589-3

Determination of burning behaviour of plastics by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) English version of DIN EN ISO 4589-3

DIN EN ISO 4892-2

Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2006)

DIN EN ISO 527-3

Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002)

DIN EN ISO 527-4

Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)

DIN EN ISO 527-5

Determination of tensile properties of plastics - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997)

DIN EN ISO 536

Determination of grammage of paper and board (ISO 536:1995)

DIN EN ISO 5999

Polymeric materials, cellular flexible - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:1982)

DIN EN ISO 61

Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); English version of DIN EN ISO 61

DIN EN ISO 62

Plastics - Determination of water absorption (ISO 62:1999)

DIN EN ISO 6603-2

Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2000); English version of DIN EN ISO 6603-2

DIN EN ISO 845

Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988)

DIN EN ISO 868

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

DIN EN ISO 899-2

Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)

DIN ISO 123

Rubber latex - Sampling (ISO 123:2001)

DIN ISO 13542

Paper and board - Specification for internal diameters of cores for reels (ISO 13542:2006)

DIN ISO 1435

Rubber compounding ingredients - Carbon black (pelletized) - Determination of fines content (ISO 1435:1996)

DIN ISO 171

Plastics - Determination of bulk factor of moulding materials (ISO 171:1980)

DIN ISO 2005

Natural rubber latex concentrate - Determination of sludge content (ISO 2005:1992)

DIN ISO 2285

Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2001)

DIN ISO 4649

Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002)

DIN ISO 7991

Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)

DIN CWA 14243

Post-consumer tyre materials and applications (English version CWA 14243:2002)

DIN CWA 14243-1

Post-consumer tyre materials and applications - Part 1: Materials; English Version CWA 14243-1:2001

DIN EN 1007-1

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 1: Determination of size content

DIN EN 1007-2

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density

DIN EN 1007-3

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area

DIN EN 1007-4

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature

DIN EN 1007-5

Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

DIN EN 1010-1

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

DIN EN 1010-2

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

DIN EN 1010-3

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

DIN EN 1010-4

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

DIN EN 1010-5

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board

DIN EN 1034-1

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements; English version of DIN EN 1034-1

DIN EN 1034-13

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

DIN EN 1034-14

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter

DIN EN 1034-2

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

DIN EN 1034-22

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

DIN EN 1034-3

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines; English version of DIN EN 1034-3

DIN EN 1034-4

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

DIN EN 1034-5

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

DIN EN 1034-6

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

DIN EN 1034-7

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

DIN EN 1036

Glass in building - Mirrors from silver-coated float glass for internal use

DIN EN 1051-1

Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description

DIN EN 1067

Adhesives - Examination and preparation of samples for testing

DIN EN 1071-1

Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer

DIN EN 1071-2

Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method

DIN EN 1071-3

Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test

DIN EN 1071-4

Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)

DIN EN 1094-1

Insulating refractory products - Part 1: Terminology for ceramic fibre products

DIN EN 1094-2

Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990, modified)

DIN EN 1094-3

Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres

DIN EN 1096-1

Glass in building - Coated glass - Part 1: Definitions and classification

DIN EN 1096-2

Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings; English version of DIN EN 1096-2

DIN EN 1096-3

Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings; English version of DIN EN 1096-3

DIN EN 1096-4

Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard

DIN EN 1104

Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents

DIN EN 1114-1

Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders

DIN EN 1114-2

Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers

DIN EN 1114-3

Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs; English version of DIN EN 1114-3

DIN EN 1122

Plastics - Determination of cadmium - Wet decomposition method; English version of DIN EN 1122

DIN EN 1159-1

Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 1: Determination of thermal expansion

DIN EN 1159-2

Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity

DIN EN 1159-3

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 3: Determination of specific heat capacity

DIN EN 12003

Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives

DIN EN 12004

Adhesives for tiles - Definitions and specifications (includes amendment A1:2002)

DIN EN 12012-1

Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators; English version of DIN EN 12012-1

DIN EN 12012-2

Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers (includes Amendment A1:2003)

DIN EN 12012-3

Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders; English version of DIN EN 12012-3

DIN EN 12012-4

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

DIN EN 12013

Rubber and plastics machines - Internal mixers - Safety requirements; English version of DIN EN 12013

DIN EN 12023

Self-adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere

DIN EN 12024

Self-adhesive tapes - Measurement of resistance to elevated temperature and humidity

DIN EN 12025

Self-adhesive tapes - Measurement of tear resistance by the pendulum

DIN EN 12026

Self-adhesive tapes - Measurement of the unwinding force at high speed

DIN EN 12027

Self-adhesive tapes - Measurement of flame resistance

DIN EN 12028

Self-adhesive tapes - Measurement of elongation under static load

DIN EN 12029

Self-adhesive tapes - Determination of water-soluble corrosive ions

DIN EN 12030

Self-adhesive tapes - Measurement of impact resistance

DIN EN 12031

Self-adhesive tapes - Measurement of bursting strength

DIN EN 12032

Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing

DIN EN 12033

Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing

DIN EN 12034

Self-adhesive tapes - Measurement of the length of a roll of adhesive tape

DIN EN 12035

Self-adhesive tapes - Flagging of adhesive tape

DIN EN 12036

Self-adhesive tapes - Solvent penetration into adhesive masking tapes

DIN EN 12092

Adhesives - Determination of viscosity; English version of DIN EN 12092

DIN EN 12150-1

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; English version of DIN EN 12150-1

DIN EN 1217

Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles

DIN EN 12281

Printing and business paper - Requirements for copy paper for dry toner imaging processes

DIN EN 12283

Printing and business paper - Determination of toner adhesion