DIN EN 912

Timber fasteners - Specifications for connectors for timber (includes corrigendum AC:2000); English version of DIN EN 912:1999 + AC:2000

DIN 18800-1

Structural steelwork; design and construction

DIN EN 933-1

Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

DIN 18800-1/A1

Structural steelwork - Design and construction - Amendment A1

DIN 1045-1

Plain concrete, reinforced and prestressed concrete structures - Part 1: Design and construction

DIN 4030-1

Assessment of water, soil and gases for their aggressiveness to concrete; principles and limiting values

DIN 55928-8

Corrosion protection of steel structures by the application of organic or metallic coatings - Corrosion protection of thin-walled structural members

DIN 1045-2

Plain, reinforced and prestressed concrete structures - Part 2: Specification, properties, production and conformity of concrete (Application document for use with DIN EN 206-1)

DIN 18122-1

Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit

DIN 18122-2

Determining the shrinkage limit of soil

DIN 18129

Soil, investigation and testing - Determination of lime content

DIN 18130-1

Laboratory tests for determining the coefficient of permeability of soil

DIN 18800-2

Structural steelwork; analysis of safety against buckling of linear members and frames

DIN 4030-2

Assessment of water, soil and gases for their aggressiveness to concrete; collection and examination of water and soil samples

DIN 4109

Sound insulation in buildings; requirements and testing

DIN EN 934-2

Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling; English version of DIN EN 934-2

DIN 1045-1 Berichtigung 2

Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction, Corrigendum 2 to DIN 1045-1:2001-07

DIN 1045-3

Plain, reinforced and prestressed concrete structures - Part 3: Workmanship

DIN 1045-4

Plain, reinforced and prestressed concrete structures - Part 4: Supplementary specifications governing the production and conformity of precast concrete elements

DIN 1048-1

Testing concrete; testing of fresh concrete

DIN 1048-2

Testing concrete; testing of hardened concrete (specimens taken in situ)

DIN 1048-5

Testing concrete; testing of hardened concrete (specimens prepared in mould)

DIN 1055-2

Design Loads for Buildings; Soil Characteristics; Specific Weight, Angle of Friction, Cohesion, Angle of Wall Friction

DIN 18121-2

Determining the moisture contentof soil by rapid methods

DIN 18123

Determination of particle size distribution of soil

DIN 18124

Determination of particle density of soil using pyknometers

DIN 18125-1

Laboratory tests for determination of soil density

DIN 18125-2

Field tests for determination of soil density

DIN 18126

Determination of minimum and maximum dry densities of non-cohesive soil

DIN 18128

Determination the ignition loss of soil

DIN 18134

Determining the deformation and strength characteristics of soil by the plate loading test

DIN 18137-1

Determination of shear strength of soil - Terminologie and general requirements for testing

DIN 18137-2

Determination of the shear strength parameters of soil by the triaxial test

DIN 18800-4

Structural steelwork; analysis of safety against buckling of shells

DIN 4150-1

Structural vibration - Part 1: Prediction of vibration parameters

DIN 4226-100

Aggregates for mortar and concrete - Part 100: Recycled aggregates

DIN EN 1993-1-9

Eurocode 3: Design of steel structures - Part 1-9: Fatigue

DIN EN 934-3

Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling

DIN EN 934-6

Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity

DIN 1045-3/A1

Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures; Amendment A1

DIN 1053-1

Masonry - Design and construction

DIN 1054

Subsoil - Verification of the safety of earthworks and foundations

DIN 105-5

Clay bricks; lightweight horizontally perforated bricks and lightweight horizontally perforated brick panels

DIN 1072

Road and foot bridges; design loads

DIN 1164-11

Special cement - Part 11: Composition, specification and conformity evaluation for cement with short setting time

DIN 18121-1

Determination of water content of soil by the oven-drying method

DIN 18800-2/A1

Structural steelwork - Analysis of safety against buckling of linear members and frames - Amendment A1 to DIN 18800-2, November 1990 edition

DIN 2425-4

Plans for Public Utilities, Water Resources and Long-distance Lines; Sewer Network Drawings of Public Sewerage Systems

DIN 2425-5

Plans for public supplies, water engineering and long-distance pipelines; maps and plans for water engineering

DIN 2425-6

Plans for public utilities, water resources management and for long-distance pipelines; Maps and plans for water engineering, flood and coastal protection

DIN 3230-4

Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing

DIN 4022-1

Subsoil and groundwater; classification and description of soil and rock; borehole logging of soil and rock not involving continuous core sample recovery

DIN 4022-2

Subsoil and groundwater; Designation and description of soil types and rock; Stratigraphic representation for borings in rock

DIN 4022-3

Subsoil and groundwater; Designation and description of soil types and rock; Borehole log for boring in soil (loose rock) by continuous extraction of cores

DIN 4126

Cast-in-situ concrete diaphragm walls; design and construction

DIN 4150-2

Structural vibration - Human exposure to vibration in buildings

DIN 4150-3

Structural vibration - Effects of vibration on structures

DIN 4235-1

Compacting of Concrete by Vibrating; Vibrators and Vibration Mechanics

DIN 4235-2

Compacting of Concrete by Vibrating; Compacting by Internal Vibrators

DIN 4235-3

Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components

DIN 4235-4

Compacting of Concrete by Vibrating; Compacting of In-situ by Formwork Vibrators

DIN 52210-6

Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference

DIN EN 12390-2

Testing hardened concrete - Part 2: Making and curing specimens for strength tests; English version of DIN EN 12390-2

DIN EN 12504-2

Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; English version of DIN EN 12504-2

DIN EN 206-1/A2

Concrete - Part 1: Specification, performance, production and conformity

DIN EN 933-2

Tests for geometrical properties of aggregates - Determination of particle size distribution: Test sieves and nominal aperture size

DIN EN 933-6

Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics; Flow coefficient of aggregates; English version of DIN EN 933-6

DIN EN 934-2/A1

Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling

DIN EN 934-4

Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling; English version of DIN EN 934-4

DIN EN ISO 12944-4

Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:1998)

DIN 1053-2

Masonry - Masonry strength classification on the basis of suitability testing

DIN 1053-3

Reinforced masonry; design and construction

DIN 1075

Concrete bridges; Dimensioning and construction

DIN 1080-3

Terms, Symbols and Units Used in Civil Engineering; Concrete Construction and Reinforced Concrete Construction, Prestressed Concrete Construction, Masonry Construction

DIN 1080-4

Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete

DIN 1080-6

Terms, Symbols and Units used in Civil Engineering; Soil Mechanics and Foundation Engineering

DIN 1236-1

Class A and class B concrete elements and buckets for gullies; Design; installation and assemblies

DIN 1236-2

Classe A and class B concrete elements and buckets for gullies; Concrete elements

DIN 1236-3

Classes A and B concrete elements and buckets for gullies; Buckets

DIN 14097-1

Firefigther training facilities - Part 1: General requirements

DIN 14097-2

Firefigther training facilities - Part 2: Gas-fuelled simulation devices

DIN 14097-3

Firefigther training facilities - Part 3: Wood-fired training facilities

DIN 14097-4

Firefigther training facilities - Part 4: Firefigther training houses

DIN 18007

Demolition work - Terminology, techniques and applications

DIN 18127

Determination of dry density/moisture content relationship (Proctor test)

DIN 18148

Hollow lightweight concrete concrete blocks for walls

DIN 18162

Solid lightweight concrete blocks for walls

DIN 18200

Conformity assessment of construction products - Factory production control, third-party inspection, and certification

DIN 18202

Tolerances in building construction - Buildings

DIN 18203-1

Tolerances for building - Part 1: Precast ordinary, reinforced and prestressed concrete components

DIN 18217

Concrete surfaces and formwork surface

DIN 18384

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems

DIN 18516-4

Back-ventilated, non-loadbearing, external enclosures of buildings, made from tempered safety glass panels - Requirements and testing

DIN 18555-7

Testing of mortars containing mineral binders; determination of water retentivity of freshly mixed mortar by the filter plate method

DIN 18560-3

Floor screeds in building construction - Part 3: Base-bonded floor screeds

DIN 18650-1

Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods

DIN 18650-2

Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors

DIN 19560-10

Polypropylene (PP) pipes and fittings for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation

DIN 1960

Construction contract procedures (VOB) - Part A: General provisions relating to the award of construction contracts

DIN 19657

Protection of Watercourses, Dikes, and Coastal Dunes; Guidelines

DIN 19702

Stability of solid hydraulic structures

DIN 1988-2

Drinking water supply systems; materials, components, appliances, design and installation (DVGW code of practice)

DIN 1988-3

Drinking water supply systems; pipe sizing (DVGW code of practice)

DIN 2425-3

Plans for Public Utilities, Water Resources and Long-distance Lines; Plans for Long-distance Pipelines, Technical Regulation of the DVGW (German Gas and Water Engineers Association)

DIN 4018

Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations

DIN 4019-1

Subsoil; Settlement Calculations for Perpendicular Central Loading

DIN 4019-2

Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading

DIN 4019-2 Beiblatt 1

Subsoil; Settlement calculations in the case of inclined and eccentrically acting loading; Explanations and examples of calculation

DIN 4021

Ground exploration by excavation, boring and sampling

DIN 4034-10

Precast unreinforced and reinforced concrete manholes and inspection chambers - Part 10: Brick bottom shaft sections for buried drains and sewers - Requirements and testing

DIN 4034-2

Precast unreinforced and reinforced concrete components for well shafts and soakaways; dimensions and technical delivery conditions

DIN 4093

Ground treatment by grouting; planning, grouting procedure and testing

DIN 4095

Planning, design and installation of drainage systems protecting structures against water in the ground

DIN 4141-2

Structural bearings; bearing systems for civil engineering structures forming part of traffic routes (bridges)

DIN 4141-3

Structural bearings; bearing systems for buildings

DIN 4158

Filler concrete joists for reinforced and prestressed concrete floors

DIN 4159

Loadbearing clay blocks for use in hollow pot and reinforced concrete ribbed floors, and wall panels (including Coorrigendum 1, Juni 2000)

DIN 4160

Non-loadbearing clay blocks for use in reinforced concrete ribbed and beam floors

DIN 4166

Autoclaved aerated concrete slabs and panels

DIN 4235-5

Compacting of Concrete by Vibrating; Compacting by Surface Vibrators

DIN 4262-3

Concrete drainage pipes and multipurpose pipes for highway and civil engineering purposes; requirements and testing

DIN 482

Natural stone kerbs

DIN 5034-1

Daylight in interiors - General requirements

DIN 5034-4

Daylight in interiors - Part 4: Simplified method of determining window sizes in dwellings

DIN 5035-4

Artificial lighting of interiors; special recommendations for lighting educational establishments

DIN 51290-1

Testing of polymer concrete for use in mechanical engineering; terminology

DIN 51290-2

Testing of polymer concrete for use in mechanical engineering; testing of binders, fillers and ready-to-use mixtures

DIN 51290-3

Testing of polymer concrete for use in mechanical engineering - Testing of specimens prepared in mould

DIN 51290-4

Testing of polymer concrete for use in mechanical engineering - In-process testing and testing of components

DIN 52108

Wear testing of inorganic, nonmetallic materials using the Boehme abrasive wheel

DIN 52612-3

Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice

DIN 7865-1

Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions

DIN 7865-2

Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing

DIN EN 1015-4

Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)

DIN EN 1097-3

Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids

DIN EN 12189

Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time

DIN EN 12190

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar

DIN EN 12350-1

Testing fresh concrete - Part 1: Sampling; English version of DIN EN 12350-1

DIN EN 12350-2

Testing fresh concrete - Part 2: Slump test; English version of DIN EN 12350-2

DIN EN 12350-3

Testing fresh concrete - Part 3: Vebe test; English version of DIN EN 12350-3

DIN EN 12350-4

Testing fresh concrete - Part 4: Degree of compactability; English version of DIN EN 12350-4

DIN EN 12350-5

Testing fresh concrete - Part 5: Flow table test; English version of DIN EN 12350-5

DIN EN 12350-6

Testing fresh concrete - Part 6: Density; English version of DIN EN 12350-6

DIN EN 12350-7

Testing fresh concrete - Part 7: Air content; Pressure methods; English version of DIN EN 12350-7

DIN EN 12390-1

Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; English version of DIN EN 12390-1

DIN EN 12390-3

Testing hardened concrete - Part 3: Compressive strength of test specimens; English version of DIN EN 12390-3

DIN EN 12390-4

Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; English version of DIN EN 12390-4

DIN EN 12390-5

Testing hardened concrete - Part 5: Flexural strength of test specimens; English version of DIN EN 12390-5

DIN EN 12390-6

Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; English version of DIN EN 12390-6

DIN EN 12390-7

Testing hardened concrete - Part 7: Density of hardened concrete; English version of DIN EN 12390-7

DIN EN 12390-8

Testing hardened concrete - Part 8: Depth of penetration of water under pressure; English version of DIN EN 12390-8

DIN EN 12504-1

Testing concrete in structures - Part 1: Cored specimens - Taking, examining, and testing in compression; English version of DIN EN 12504-1

DIN EN 12504-3

Testing concrete in structures - Part 3: Determination of pull-out force

DIN EN 12504-4

Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity

DIN EN 12620

Aggregates for concrete

DIN EN 12811-3

Temporary works equipment - Part 3: Load testing

DIN EN 12839

Precast concrete products - Elements for fences; English version of DIN EN 12839

DIN EN 13687-2

Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)

DIN EN 13863-4

Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres

DIN EN 13880-12

Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)

DIN EN 1425

Bitumen and bituminous binders - Characterization of perceptible properties

DIN EN 14679 Berichtigung 1

Execution of special geotechnical works - Deep mixing; German version EN 14679:2005, Corrigenda to DIN EN 14679:2005-07

DIN EN 14844

Precast concrete products - Box culverts

DIN EN 14889-2

Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity

DIN EN 1504-8

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity

DIN EN 1537

Execution of special geotechnical works - Ground anchors; English version of DIN EN 1537:1999 + AC:2000

DIN EN 1538

Execution of special geotechnical works - Diaphragm walls; English version of DIN EN 1538

DIN EN 1542

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

DIN EN 1771

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test

DIN EN 1799

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surfaces

DIN EN 1857

Chimneys - Components - Concrete flue liners

DIN EN 1857 Berichtigung 1

Chimneys - Components - Concrete flue liners; Corrigenda 1 to DIN EN 1857:2003-11

DIN EN 1877-1

Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; English version of DIN EN 1877-1

DIN EN 1877-2

Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; English version of DIN EN 1877-2

DIN EN 1916

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

DIN EN 1917

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

DIN EN 1992-1-1

Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings

DIN EN 206-1

Concrete - Part 1: Specification, performance, production and conformity; English version of DIN EN 206-1

DIN EN 206-1/A1

Concrete - Part 1: Specification, performance, production and conformity

DIN EN 34

Wall hung W.C. pan with close coupled cistern; connecting dimensions; german version EN 34:1992

DIN EN 40-4

Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

DIN EN 450-1

Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

DIN EN 450-2

Fly ash for concrete - Part 2: Conformity evaluation

DIN EN 480-1

Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing

DIN EN 480-1

Methods of testing admixtures for concrete, mortar and grout - Part 1: Reference concrete and reference mortar for testing

DIN EN 480-10

Methods of testing admixtures for concrete, mortar, and grout - Part 10: Determination of the water-soluble chloride content

DIN EN 480-11

Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete

DIN EN 480-12

Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures

DIN EN 480-13

Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures

DIN EN 480-4

Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete

DIN EN 480-6

Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis

DIN EN 480-8

Methods of testing admixtures for concrete, mortar, and grout - Part 8: Determination of the conventional dry material content

DIN EN 490

Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications

DIN EN 491

Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods

DIN EN 506

Roofing products from metal sheet - Specification for self-supporting products of copper or zinc sheet; English version of DIN EN 506

DIN EN 508-3

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; English version of DIN EN 508-3

DIN EN 678

Determination of the dry density of autoclaved aerated concrete

DIN EN 679

Determination of the compressive strength of autoclaved aerated concrete

DIN EN 680

Determination of the drying shrinkage of autoclaved aerated concrete

DIN EN 771-3

Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)

DIN EN 771-4

Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units

DIN EN 772-1

Methods of test for masonry units - Part 1: Determination of compressive strength; English version of DIN EN 772-1

DIN EN 772-14

Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; English version of DIN EN 772-14

DIN EN 772-15

Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; English version of DIN EN 772-15

DIN EN 772-6

Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; English version of DIN EN 772-6

DIN EN 933-10

Test for geometrical properties of aggregates - Part 10: Assessment of fines; Grading of fillers (air jet sieving); English version of DIN EN 933-10

DIN EN 933-5

Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles (including amendment A1:2004)

DIN EN 933-7

Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998

DIN EN 933-8

Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test

DIN EN 933-9

Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

DIN EN 934-3 Berichtigung 1

Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; Corrigenda to DIN EN 934-3:2004-03

DIN EN 934-4/A1

Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling

DIN EN 990

Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure

DIN EN 991

Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

DIN EN 992

Determination of the dry density of lightweight aggregate concrete with open structure

DIN EN ISO 12944-1

Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998)

DIN EN ISO 22475-1

Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006)

DIN EN ISO 22476-2

Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005)

DIN EN ISO 22476-3

Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)

DIN V ENV 14459

Method of risk analysis and recommendations for the use of electronics in systems for the control of gas burners and gas burning appliances; German and English version ENV 14459:2002

DIN 1056

Solid construction, free-standing chimneys; design and construction

DIN 1057-1

Building materials for free-standing chimneys; compass bricks; requirements, testing, inspection

DIN 1076

Highway structures - Testing and inspection

DIN 1080-1

Terms, Symbols and Units Used in Civil Engineering; Principles

DIN 1080-2

Terms, Symbols and Units Used in Civil Engineering; Statics

DIN 1080-5

Terms, Symbols and Units Used in Civil Engineering; Timber Construction

DIN 1080-7

Terms, Symbols and Units used in Civil Engineering; Water Engineering

DIN 1080-9

Concepts, symbols and units used in civil engineering; Railway construction

DIN 1100

Hard aggregates for cement-bound floor screeds - Requirements and test methods

DIN 1239

Covers for well tops and other water supply structures - Design requiremements

DIN 1260

Lead Traps

DIN 16726

Plastic roofing felt and waterproofing sheet; testing

DIN 16729

Ethylene copolymer bitumen (ECB) plastic roofing sheeting and plastic sealing sheeting; requirements

DIN 16730

Plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements

DIN 16731

Polyisobuthylene (PIB) roofing felt with backing; requirements

DIN 16734

Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements

DIN 16735

Plasticized polyvinyl chloride (PVC-P) roofing felt with non-woven roving inner layer; requirements

DIN 16736

Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet without backing; requirements

DIN 16737

Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements

DIN 16830-1

High impact polyvinyl chloride (PVC-HI) window profiles; testing

DIN 16830-2

High impact white polyvinyl chloride (PVC-HI) window profiles; requirements

DIN 16935

Polyisobutylene (PIB) waterproofing sheet; requirements

DIN 16937

Plasticized polyvinyl chloride (PVC-P) waterproofing sheet compatible with bitumen; requirements

DIN 16938

Plasticized polyvinyl chloride (PVC-P) waterproofing sheet incompatible with bitumen; requirements

DIN 18000

Modular coordination in building

DIN 18015-1

Electrical installations in dwellings - Part 1: Design principles

DIN 18015-2

Electrical installations in dwellingss - Part 2: MInimum required equipment

DIN 18015-3

Electrical installations in dwellings - Circuit arrangement and location of electrical equipment

DIN 18095-1

Smoke control doors; concepts and requirements

DIN 18095-2

Smoke control doors; type testing for durability and leakage

DIN 18095-3

Smoke control door and shutter assemblies - Part 3: Application of test results

DIN 18100

Doors; wall openings for doors with dimensions in accordance with DIN 4172

DIN 18157-2

Application of ceramic tiling using the thin-bed method; dispersion adhesives

DIN 18157-3

Application of ceramic tiling by the thin bed method using epoxy resin adhesives

DIN 18158

Clinker floor tiles

DIN 18159-1

Polyurethane (PUR) foam thermal insulating material applied in situ - Applications, requirements, workmanship and testing

DIN 18159-2

Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing

DIN 18182-4

Accessories for the installation of gypsum plasterboard; nails

DIN 18183

Prefabricated gypsum plasterboard; metal stud partitions

DIN 18184

Gypsum plaster boards with polystyrene or polyurethane rigid foam as insulating material

DIN 18192

Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing

DIN 18195-7

Waterproofing of buildings and structures; waterproofing sheeting subjected to hydrostatic pressure from the inside; design and workmanship

DIN 18203-3

Tolerances for building; building components of timber and wood based panel products

DIN 18205

Brief for building design

DIN 18216

Formwork ties; requirements, testing, use

DIN 18262

Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors

DIN 18303

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Timbering to trenchwork

DIN 18304

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Piling

DIN 18305

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Groundwater lowering

DIN 18306

Construction contract procedures (VOB) - Part C: General technical specifications in contruction contracts (ATV); Underground drainage

DIN 18308

Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Land drainage

DIN 18309

Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Ground treatment by grouting

DIN 18310

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Revetment work

DIN 18312

Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Underground construction work

DIN 18313

Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Diaphragm walling

DIN 18314

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Sprayed concrete work

DIN 18315

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Surfacings without binder

DIN 18316

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts - Road construction - Surfacings with hydraulic binders

DIN 18317

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Asphalt surfacings

DIN 18318

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) Road construction - Dry-jointed sett and slab pavements, and surrounds

DIN 18319

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Trenchless pipelaying

DIN 18321

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Jet grouting work

DIN 18325

Construction Contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Track construction

DIN 18331

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Concrete work

DIN 18332

Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Natural stone work

DIN 18333

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Cast stone work

DIN 18335

Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Structural steelwork

DIN 18336

Construction contract procedures (VOB) - Part C: General technical specifications fin construction contracts (ATV); Waterproofing

DIN 18339

Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Sheet metal roofing and wall covering work

DIN 18340

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Dry lining and partitioning work

DIN 18345

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Work on external thermal insulation composite systems

DIN 18349

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Repair work on concrete structures

DIN 18354

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Asphalt flooring work

DIN 18360

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Metalwork

DIN 18361

Contuction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Glazing

DIN 18367

Constructin contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Laying of wood block flooring

DIN 18382

Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Electrical supply systems rated for voltages up to 36 kV

DIN 18385

Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Installation of lifts, escalators, passenger conveyors and materials handling equipment

DIN 18515-1

Design and installation of tile or stone cladding

DIN 18515-2

Design and installation of masonry cladding on supports