|
DIN EN 10240 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
|
DIN EN 10241 |
Steel threaded pipe fittings; English version of DIN EN 10241 |
|
DIN EN 10246-12 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; English version of DIN EN 10246-12 |
|
DIN EN 10253-1 |
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
|
DIN EN 10255 |
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
|
DIN EN 10305-6 |
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
DIN EN 10310 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
|
DIN EN 1092-4 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
|
DIN EN 12266-1 |
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
DIN EN 12266-2 |
Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements |
|
DIN EN 1252-1 |
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80°C; German version EN 1252-1:1998 |
|
DIN EN 12666-1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
|
DIN EN 12805 |
Automotive LPG components - Containers |
|
DIN EN 13096 |
Transportable gas cylinders - Conditions for filling gases into receptacles - Single component gases |
|
DIN EN 13160-7 |
Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
|
DIN EN 13244-2 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
DIN EN 1333 |
Flanges and their joints - Pipework components - Definition and selection of PN |
|
DIN EN 13480-2 Berichtigung 1 |
Metallic industrial piping - Part 2 : Materials; Corrigenda 1 to DIN EN 13480-2:2002:08 |
|
DIN EN 13480-3 Berichtigung 2 |
Metallic industrial piping - Part 3: Design and calculation; Corrigenda 2 to DIN EN 13480-3:2002-08 |
|
DIN EN 13480-4 Berichtigung 1 |
Metallic industrial piping - Part 4: Fabrication and installation; Corrigenda 1 to DIN EN 13480-4:2002-08 |
|
DIN EN 13480-5 Berichtigung 1 |
Metallic industrial piping - Part 5: Inspection and testing; Corrigenda 1 to DIN EN 13480-5:2002-08 |
|
DIN EN 13648-1 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
|
DIN EN 13786 |
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
|
DIN EN 14025 Berichtigung 1 |
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; Corrigendum 1 to DIN EN 14025:2004-02 |
|
DIN EN 14398-1 |
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements |
|
DIN EN 14398-2 |
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
DIN EN 1440 |
LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection |
|
DIN EN 1456-1 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; English version of DIN EN 1456-1 |
|
DIN EN 14620-3 |
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components |
|
DIN EN 1759-1 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
|
DIN EN 1763-1 |
Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; English version of DIN EN 1763-1 |
|
DIN EN 1802 |
Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
|
DIN EN 1916 Berichtigung 1 |
Corrigenda to DIN EN 1916:2003-04 |
|
DIN EN 1968 |
Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders |
|
DIN EN 1983 |
Industrial valves - Steel ball valves |
|
DIN EN 27326 |
Rubber and plastics hoses; assessment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993 |
|
DIN EN 286-1/A2 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes |
|
DIN EN 558-2 |
Face-to-face and centre-to-face dimensions of metal industrial valves for use in flanged pipe systems - Class-designated valves |
|
DIN EN 560 |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
|
DIN EN 593 |
Industrial valves - Metallic butterfly valves |
|
DIN EN 694 Berichtigung 2 |
Corrigenda to DIN EN 694:2001-12 (EN 694:2001/AC:2003) |
|
DIN EN 715 |
End-load bearing joints between small diameter thermoplastics pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust |
|
DIN EN 736-1 |
Valves - Terminology - Types of valves |
|
DIN EN 736-2 |
Valves - Terminology - Part 2: Definition of components of valves |
|
DIN EN 736-3 |
Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001 |
|
DIN EN 752-6 |
Drain and sewer systems outside buildings - Part 6: Pumping installations |
|
DIN EN 982 |
Safety of machinery - Safety requirements for fluid power systems and their components: Hydraulics |
|
DIN EN ISO 10931 |
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) |
|
DIN EN ISO 1402 |
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994) |
|
DIN EN ISO 14692-1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 |
|
DIN EN ISO 14723 |
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001 |
|
DIN EN ISO 1746 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); English version of DIN EN ISO 1746 |
|
DIN EN ISO 3861 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) |
|
DIN EN ISO 4023 |
Rubber hoses for steam - Test methods (ISO 4023:1991) |
|
DIN EN ISO 4671 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); English version of DIN EN ISO 4671 |
|
DIN EN ISO 5211 |
Industrial valves - Part-turn actuator attachments (ISO 5211:2001); Englisch version of DIN EN ISO 5211 |
|
DIN EN ISO 580 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) |
|
DIN EN ISO 6945 |
Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991, including Amendment 1:1998); English version of DIN EN ISO 6945:1996 + A1:2000 |
|
DIN EN ISO 7751 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) |
|
DIN EN ISO 9974-1 |
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); English version of DIN EN ISO 9974-1 |
|
DIN EN ISO 9974-3 |
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); English version of DIN EN ISO 9974-3 |
|
DIN ISO 10766 |
Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996) |
|
DIN ISO 15171-1 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
|
DIN ISO 15171-2 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000) |
|
DIN ISO 3019-1 |
Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001) |
|
DIN ISO 5598 |
(DRAFT) Fluid power systems and components - Vocabulary (ISO/DIS 5598:2004) |
|
DIN 8063-6 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing - Dimensions |
|
DIN 8063-8 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 8: Injection-moulded sockets, caps and nipples for solvent cementing - Dimensions |
|
DIN 85004-9 |
(DRAFT) Pipelines of copper-nickel-alloys - Part 9: General principles for the radiographic examination |
|
DIN EN 1012-1 |
Safety requirements for compressors and vacuum pumps - Compressors |
|
DIN EN 1012-2 |
Safety requirements for compressors and vacuum pumps - Vacuum pumps |
|
DIN EN 10208-1 |
Technical delivery conditions for steel pipes for use with combustible fluids - Part 1: Pipes of requirement class A |
|
DIN EN 10208-2 |
Technical delivery conditions for steel pipes for use with combustible fluids - Pipes of requirement class B |
|
DIN EN 10217-3 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
DIN EN 10217-4 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
|
DIN EN 10217-5 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (includes Admendment A1:2005) |
|
DIN EN 10217-6 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
|
DIN EN 10224 |
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions |
|
DIN EN 10242 |
Threaded pipe fitting in malleable cast iron |
|
DIN EN 10242/A2 |
Threaded pipe fitting in malleable cast iron; Amendment A2 |
|
DIN EN 10246-1 |
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
|
DIN EN 10246-10 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; English version of DIN EN 10246-10 |
|
DIN EN 10246-11 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; English version of DIN EN 10246-11 |
|
DIN EN 10246-13 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; English version of DIN EN 10246-13 |
|
DIN EN 10246-14 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-14 |
|
DIN EN 10246-15 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-15 |
|
DIN EN 10246-16 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-16 |
|
DIN EN 10246-17 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-17 |
|
DIN EN 10246-18 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-18 |
|
DIN EN 10246-2 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; English version of DIN EN 10246-2 |
|
DIN EN 10246-3 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; English version of DIN EN 10246-3 |
|
DIN EN 10246-4 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-4 |
|
DIN EN 10246-5 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; English version of DIN EN 10246-5 |
|
DIN EN 10246-6 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-6 |
|
DIN EN 10246-7 |
Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
|
DIN EN 10246-8 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; English version of DIN EN 10246-8 |
|
DIN EN 10246-9 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections; English version of DIN EN 10246-9 |
|
DIN EN 10256 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel; English version of DIN EN 10256 |
|
DIN EN 10284 |
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; English version of DIN EN 10284 |
|
DIN EN 10288 |
Steel tubes and fittings for on and offshore pipelines - External two-layer extruded polyethylene based coatings |
|
DIN EN 10289 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
|
DIN EN 10290 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
|
DIN EN 10298 |
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
|
DIN EN 10300 |
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
|
DIN EN 10301 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
DIN EN 10311 |
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
DIN EN 10312 |
Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions |
|
DIN EN 10329 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
|
DIN EN 1053 |
Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
|
DIN EN 1055 |
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
|
DIN EN 1057 |
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
|
DIN EN 1074-1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; English version of DIN EN 1074-1 |
|
DIN EN 1074-2 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
|
DIN EN 1074-3 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; English version of DIN EN 1074-3 |
|
DIN EN 1074-4 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; English version of DIN EN 1074-4 |
|
DIN EN 1074-5 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; English version of DIN EN 1074-5 |
|
DIN EN 1074-6 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
|
DIN EN 1089-2 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels |
|
DIN EN 1089-3 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
|
DIN EN 1092-3 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges |
|
DIN EN 1106 |
Manually operated taps for gas burning appliances; English version of DIN EN 1106 |
|
DIN EN 1113 |
Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997 |
|
DIN EN 1119 |
Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Testing for leaktightness and resistance to damage of flexible and reduced-articulation joints |
|
DIN EN 1120 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
|
DIN EN 1124-2 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions |
|
DIN EN 1124-3 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions |
|
DIN EN 1124-4 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
|
DIN EN 1151-1 |
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps, requirements, testing, marking |
|
DIN EN 1151-2 |
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid borne noise |
|
DIN EN 1171 |
Industrial valves - Cast iron gate valves |
|
DIN EN 12007-1 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations; English version of DIN EN 12007-1 |
|
DIN EN 12007-3 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; English version of DIN EN 12007-3 |
|
DIN EN 12007-4 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation; English version of DIN EN 12007-4 |
|
DIN EN 12061 |
Plastics piping systems - Thermoplastics fittings - Test method for impact strength |
|
DIN EN 12067-1 |
Gas/air controls for gas burners and gas burning appliances - Part 1: Pneumatic types |
|
DIN EN 12067-1/A1 |
Gas/air ratio controls for gas burners and gas buring appliances - Part 1: Pneumatic types; Amendment A1 |
|
DIN EN 12067-2 |
Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
|
DIN EN 12068 |
External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
|
DIN EN 12078 |
Zero governors for gas burners and gas burning appliances |
|
DIN EN 12095 |
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength |
|
DIN EN 12099 |
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile matter content |
|
DIN EN 12100 |
Polyethylene (PE) valves - Test method for resistance to bending between supports |
|
DIN EN 12106 |
Polyethylene (PE) pipess- Test method for the resistance to internal pressure after application of squeeze-off |
|
DIN EN 12107 |
Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
|
DIN EN 12115 |
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
|
DIN EN 12117 |
Plastics fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
|
DIN EN 12118 |
Determination of moisture content in thermoplastics by coulometry |
|
DIN EN 12119 |
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
|
DIN EN 1213 |
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
|
DIN EN 12157 |
Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions |
|
DIN EN 12162 |
Liquid pumps - Safety requirements - Procedure for hydrostatic testing; English version of DIN EN 12162 |
|
DIN EN 12186 |
Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements |
|
DIN EN 12200-1 |
Plastics rainwater piping systems for above-ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; English version of DIN EN 12200-1 |
|
DIN EN 12201-1 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General |
|
DIN EN 12201-2 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes |
|
DIN EN 12201-3 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings |
|
DIN EN 12201-4 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; English version of DIN EN 12201-4 |
|
DIN EN 12201-5 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
DIN EN 12205 |
Transportable gas cylinders - Non refillable metallic gas cylinders; English version of DIN EN 12205 |
|
DIN EN 12213 |
Cryogenic vessels - Methods for performance evaluation of thermal insulation |
|
DIN EN 12220 |
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation |
|
DIN EN 12245 |
Transportable gas cylinders - Fully wrapped composite gas cylinders |
|
DIN EN 1225 |
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness |
|
DIN EN 12256 |
Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings |
|
DIN EN 12257 |
Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
|
DIN EN 1226 |
Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
|
DIN EN 12262 |
Rotodynamic pumps - Technical documents - Terms, delivery range, layout |
|
DIN EN 1227 |
Class-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions |
|
DIN EN 12279 |
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements |
|
DIN EN 1228 |
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
|
DIN EN 12284 |
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
|
DIN EN 12285-1 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
|
DIN EN 12285-2 |
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
DIN EN 12288 |
Industrial valves - Copper alloy gate valves |
|
DIN EN 1229 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
|
DIN EN 12293 |
Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
|
DIN EN 12294 |
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
|
DIN EN 12295 |
Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
|
DIN EN 12300 |
Cryogenic vessels - Cleanliness for cryogenic service |
|
DIN EN 12308 |
Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping |
|
DIN EN 1232 |
Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
|
DIN EN 12324-2 |
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines |
|
DIN EN 12334 |
Industrial valves - Cast iron check valves |
|
DIN EN 12351 |
Industrial valves - Protective caps for valves with flanged connections |
|
DIN EN 12380 |
Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
|
DIN EN 12434 |
Cryogenic vessels - Crogenic flexible hoses; English version of DIN EN 12434 |
|
DIN EN 12449 |
Copper and copper alloys - Seamless, round tubes for general purposes |
|
DIN EN 12450 |
Copper and copper alloys - Seamless, round copper capillary tubes |
|
DIN EN 12451 |
Copper and copper alloys - Seamless, round tubes for heat exchangers |
|
DIN EN 12452 |
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
|
DIN EN 12462 |
Biotechnology - Performance criteria for pumps |
|
DIN EN 12474 |
Cathodic protection for submarine pipelines; English version of DIN EN 12474 |
|
DIN EN 12483 |
Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
|
DIN EN 12493 |
Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture; English version of DIN EN 12493 |
|
DIN EN 12502-1 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General |
|
DIN EN 12502-2 |
Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys |
|
DIN EN 12502-3 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot-dip galvanised ferrous materials |
|
DIN EN 12502-4 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels |
|
DIN EN 12502-5 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyd steels |
|
DIN EN 1251-1 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; English version of DIN EN 1251-1 |
|
DIN EN 1251-2 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; English version of DIN EN 1251-2 |
|
DIN EN 1251-3 |
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; English version of DIN EN 1251-3 |
|
DIN EN 12516-1 |
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
|
DIN EN 12516-2 |
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
|
DIN EN 12516-3 |
Valves - Shell design strength - Part 3: Experimental method |
|
DIN EN 1252-2 |
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C; English version of DIN EN 1252-2 |
|
DIN EN 1254-1 |
Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
|
DIN EN 1254-2 |
Copper and copper alloy plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
|
DIN EN 1254-3 |
Copper and copper alloy plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
|
DIN EN 1254-4 |
Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
|
DIN EN 1254-5 |
Copper and copper alloy plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
|
DIN EN 1256 |
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
|
DIN EN 12560-1 |
Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; English version of DIN EN 12560-1 |
|
DIN EN 12560-2 |
Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; English version of DIN EN 12560-2 |
|
DIN EN 12560-3 |
Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; English version of DIN EN 12560-3 |
|
DIN EN 12560-4 |
Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; English version of DIN EN 12560-4 |
|
DIN EN 12560-5 |
Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; English version of DIN EN 12560-5 |
|
DIN EN 12560-6 |
Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
|
DIN EN 12560-7 |
Flanges and their joints - Gaskets for class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
|
DIN EN 12567 |
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; English version of DIN EN 12567 |
|
DIN EN 12569 |
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); English version of DIN EN 12569:1999 + AC:2000 |
|
DIN EN 12570 |
Industrial valves - Method for sizing the operating element; English version of DIN EN 12570 |
|
DIN EN 12573-2 |
Welded static non-pressurized thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; English version of DIN EN 12573-2 |
|
DIN EN 12573-3 |
Welded static non-pressurzed thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks; English version of DIN EN 12573-3 |
|
DIN EN 12573-4 |
Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints; English version of DIN EN 12573-4 |
|
DIN EN 12583 |
Gas supply systems - Compressor stations - Functional requirements; English version of DIN EN 12583 |
|
DIN EN 12585 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1 000 - Compatibility and interchangeability |
|
DIN EN 126 |
Multifunctional controls for gas burning appliances |
|
DIN EN 12627 |
Industrial valves - Butt welding ends for steel valves |
|
DIN EN 12639 |
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy; English version of DIN EN 12639 |
|
DIN EN 1267 |
Valves - Test of flow resistance using water as test fluid |
|
DIN EN 12723 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units; English version of DIN EN 12723 |
|
DIN EN 12734 |
Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical terms of delivery and testing; English version of DIN EN 12734 |
|
DIN EN 12735-1 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
|
DIN EN 12735-2 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
|
DIN EN 12754 |
Transportable gas cylinders - Cylinders for dissolved acetylene - Inspection at time of filling; English version of DIN EN 12754 |
|
DIN EN 12755 |
Transportable gas cylinders - Filling conditions for acetylene bundles; English version of DIN EN 12755 |
|
DIN EN 12763 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; English version of DIN EN 12763 |
|
DIN EN 1277 |
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
|
DIN EN 12807 |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction; English version of DIN EN 12807 |
|
DIN EN 12816 |
Transportable refillable steel and aluminium LPG cylinders - Disposal; English version of DIN EN 12816 |
|
DIN EN 12817 |
LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 overground |
|
DIN EN 12818 |
LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 underground |
|
DIN EN 12819 |
Inspection and requalification of LPG tanks greater than 13 m3 overground |
|
DIN EN 12820 |
Inspection and requalification of LPG tanks greater than 13 m3 underground |
|
DIN EN 12842 |
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; English version of DIN EN 12842 |
|
DIN EN 12862 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders; English version of DIN EN 12862 |
|
DIN EN 12863 |
Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders |
|
DIN EN 12864 |
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures |
|
DIN EN 12900 |
Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data |
|
DIN EN 12919 |
Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
|
DIN EN 1295-1 |
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
|
DIN EN 12952-10 |
Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure |
|
DIN EN 12954 |
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines; English version of DIN EN 12954 |
|
DIN EN 12972 |
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
|
DIN EN 12982 |
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; English version of DIN EN 12982 |
|
DIN EN 13052-1 |
Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; English version of DIN EN 13052-1 |
|
DIN EN 13076 |
Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A - Type A |
|
DIN EN 13077 |
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, type B |
|
DIN EN 13078 |
Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C |
|
DIN EN 13079 |
Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D |
|
DIN EN 13081 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor coupler; English version of DIN EN 13081 |
|
DIN EN 13082 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; English version of DIN EN 13082 |
|
DIN EN 13083 |
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; English version of DIN EN 13083 |
|
DIN EN 13090 |
Means for resealing threaded joints of gas pipework in buildings; English version of DIN EN 13090 |
|
DIN EN 13094 |
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
|
DIN EN 13099 |
Transportable gas cylinders - Conditions for filling gas mixtures into receptacles |
|
DIN EN 13109 |
LPG tanks - Disposal |
|
DIN EN 13110 |
Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
|
DIN EN 13121-1 |
GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
|
DIN EN 13121-2 |
GRP tanks and vessels for use above ground - Part 2: Composite materials; Chemical resistance |
|
DIN EN 13121-4 |
GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance |
|
DIN EN 13141-4 |
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential systems |
|
DIN EN 13152 |
Specification and testing of LPG cylinder valves - Self-closing (includes Amendment A1:2003) |
|
DIN EN 13153 |
Specification and testing of (LPG) cylinder valves, manually operated (includes Amendment A1:2003) |
|
DIN EN 13160-1 |
Leak detection systems - Part 1: General principles |
|
DIN EN 13160-2 |
Leak detection systems - Part 2: Pressure and vacuum systems |
|
DIN EN 13160-3 |
Leak detection systems - Part 3: Liquid systems for tanks |
|
DIN EN 13160-4 |
Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
DIN EN 13160-5 |
Leak detection systems - Part 5: Tank gauge leak detection systems |
|
DIN EN 13160-6 |
Leak detection systems - Part 6: Sensors in monitoring wells |
|
DIN EN 13175 |
Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings (includes Amendment A1:2005) |
|
DIN EN 13244-3 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
|
DIN EN 13244-4 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
|
DIN EN 1327 |
Thermoplastic hoses for gas welding and allied processes |
|
DIN EN 13275 |
Cryogenic vessels - Pumps for cryogenic service; English version of DIN EN 13275 |
|
DIN EN 13280 |
Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; English version of DIN EN 13280 |
|
DIN EN 1329-1 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
|
DIN EN 13293 |
Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
|
DIN EN 13308 |
Tanks for transport of dangerous goods - Service equipment for tanks - Non-pressure balanced footvalve |
|
DIN EN 13314 |
Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
|
DIN EN 13315 |
Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler |
|
DIN EN 13316 |
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
|
DIN EN 13317 |
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
|
DIN EN 13317 |
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly (includes Amendment A1:2006) |
|
DIN EN 13322-1 |
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel |
|
DIN EN 13322-2 |
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel |
|
DIN EN 13341 |
Thermoplastic static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods |
|
DIN EN 13348 |
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
|
DIN EN 13349 |
Copper and copper alloys - Pre-insulated copper tubes with solid covering |