|
DIN EN 855 |
Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
|
DIN EN 856 |
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
|
DIN EN 877 |
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
|
DIN EN 877/A1 |
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
|
DIN EN 88 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar |
|
DIN EN 911 |
Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
|
DIN EN 917 |
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997 |
|
DIN EN 922 |
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings - Specimen preparation for determination of the viscosity number and calculation of the K-value |
|
DIN EN 969 |
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
|
DIN EN 969/A1 |
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
|
DIN EN 976-1 |
Underground horizontal cylindrical tanks of glass-reinforced plastics (GRP) for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
|
DIN EN 976-2 |
Underground horizontal cylindrical tanks of glass-reinforced plastics (GRP) for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks |
|
DIN EN 977 |
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
|
DIN EN 978 |
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor α and factor β |
|
DIN EN ISO 10156-2 |
Gas cylinders - Gases and gas mixtures - Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures (ISO 10156-2:2005) |
|
DIN EN ISO 10286 |
(DRAFT) Gas cylinders - Terminology (ISO/DIS 10286:2004); Trilingual version prEN ISO 10286:2004 |
|
DIN EN ISO 10380 |
Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003) |
|
DIN EN ISO 10405 |
(DRAFT) Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000); German and English version EN ISO 10405:2006 |
|
DIN EN ISO 10405 |
Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000); German and English version EN ISO 10405:2006 |
|
DIN EN ISO 10431 |
(DRAFT) Petroleum and natural gas industries - Pumping units - Specification (ISO/DIS 10431:2006); English version prEN ISO 10431:2006 |
|
DIN EN ISO 10434 |
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) |
|
DIN EN ISO 10440-2 |
Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001 |
|
DIN EN ISO 10497 |
Testing of valves - Fire type testing requirements (ISO 10497:2004) |
|
DIN EN ISO 10524-1 |
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
|
DIN EN ISO 10524-2 |
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) |
|
DIN EN ISO 10524-3 |
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005) |
|
DIN EN ISO 10692-1 |
Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001) |
|
DIN EN ISO 10692-2 |
Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001) |
|
DIN EN ISO 10806 |
Pipework - Fittings for corrugated metal hoses (ISO 10806:2003) |
|
DIN EN ISO 10960 |
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) |
|
DIN EN ISO 11114-1 |
Compatibility of transportable gas cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997, including Corrigendum AC:1998) |
|
DIN EN ISO 11114-2 |
Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); English version of DIN EN ISO 11114-2 |
|
DIN EN ISO 11114-3 |
Compatibility of transportable gas cylinder and valve materials with gas content - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997, including Corrigendum AC:1998) |
|
DIN EN ISO 11114-4 |
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005) |
|
DIN EN ISO 11116-1 |
Gas cylinders - 17E tapered thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999) - English version EN ISO 11116-1 |
|
DIN EN ISO 11116-2 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999) |
|
DIN EN ISO 11120 |
Refillable seamless steel tubes of water capacity between 150 l and 3 000 l - Design, construction and testing (ISO 11120:1999) |
|
DIN EN ISO 11621 |
Gas cylinders - Procedures for change of gas service (ISO 11621:1997) |
|
DIN EN ISO 1167-1 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
|
DIN EN ISO 1167-2 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
|
DIN EN ISO 11758 |
Rubber and plastics hoses - Determination of changes in colour and appearance after exposure to a xenon arc lamp (ISO 11758:1995) |
|
DIN EN ISO 12162 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and overall service (design) coefficient (ISO 12162:1995) |
|
DIN EN ISO 12209-1 |
Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); English version of DIN EN ISO 12209-1 |
|
DIN EN ISO 12209-2 |
Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); English version of DIN EN ISO 12209-2 |
|
DIN EN ISO 12209-3 |
Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); English version of DIN EN ISO 12209-3 |
|
DIN EN ISO 13340 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); English version of DIN EN ISO 13340 |
|
DIN EN ISO 13341 |
Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997, including Corrigendum AC:1998) |
|
DIN EN ISO 13478 |
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) by a full-scale test (FST) (ISO 13478:1997) |
|
DIN EN ISO 13479 |
Determination of resistance of polyolefin pipes for the conveyance of fluids to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997) |
|
DIN EN ISO 13680 |
(DRAFT) Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO/DIS 13680:2006); English version prEN ISO 13680:2006 |
|
DIN EN ISO 13680 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
|
DIN EN ISO 13709 |
(DRAFT) Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO/DIS 13709:2005); English version prEN ISO 13709:2005 |
|
DIN EN ISO 13709 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2003); English version EN ISO 13709:2003 |
|
DIN EN ISO 13710 |
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004 |
|
DIN EN ISO 13760 |
Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998) |
|
DIN EN ISO 13769 |
Gas cylinders - Stamp marking (ISO 13769:2002) |
|
DIN EN ISO 13783 |
Unplasticized poly(vinyl chloride) (PVC-U) end-loadbearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
|
DIN EN ISO 13844 |
Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); English version of DIN EN ISO 13844 |
|
DIN EN ISO 13845 |
Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); English version of DIN EN ISO 13845 |
|
DIN EN ISO 13846 |
End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); English version of DIN EN ISO 13846 |
|
DIN EN ISO 1401 |
Rubber hoses for agricultural spraying (ISO 1401:1999); English version of DIN EN ISO 1401 |
|
DIN EN ISO 1403 |
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:1995) |
|
DIN EN ISO 14113 |
Gas welding equipment - Rubber and plastics hoses and hose assemblies for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997) |
|
DIN EN ISO 14246 |
Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); English version of DIN EN ISO 14246 |
|
DIN EN ISO 14692-2 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002 |
|
DIN EN ISO 14692-2 Berichtigung 1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006 |
|
DIN EN ISO 14692-3 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002 |
|
DIN EN ISO 14692-3 Berichtigung 1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006 |
|
DIN EN ISO 14692-4 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002 |
|
DIN EN ISO 14847 |
Rotary positive displacement pumps - Technical requirements (ISO 14847:1999) |
|
DIN EN ISO 15245-1 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001) |
|
DIN EN ISO 15245-2 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001) |
|
DIN EN ISO 15465 |
Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004) |
|
DIN EN ISO 15493 |
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2003) |
|
DIN EN ISO 15494 |
Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003) |
|
DIN EN ISO 15783 |
Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002) |
|
DIN EN ISO 15848-1 |
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006) |
|
DIN EN ISO 15848-2 |
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006) |
|
DIN EN ISO 15874-1 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003) |
|
DIN EN ISO 15874-2 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003) |
|
DIN EN ISO 15874-3 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003) |
|
DIN EN ISO 15875-1 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003) |
|
DIN EN ISO 15875-2 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003) |
|
DIN EN ISO 15875-3 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
|
DIN EN ISO 15875-5 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
|
DIN EN ISO 15876-1 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003) |
|
DIN EN ISO 15876-2 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003) |
|
DIN EN ISO 15876-3 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003) |
|
DIN EN ISO 15876-5 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003) |
|
DIN EN ISO 15877-1 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003) |
|
DIN EN ISO 15877-2 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003) |
|
DIN EN ISO 15877-3 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003) |
|
DIN EN ISO 15877-5 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003) |
|
DIN EN ISO 15996 |
Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005) |
|
DIN EN ISO 16135 |
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
|
DIN EN ISO 16136 |
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
|
DIN EN ISO 16137 |
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
|
DIN EN ISO 16138 |
Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
|
DIN EN ISO 16139 |
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
|
DIN EN ISO 16148 |
Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006) |
|
DIN EN ISO 16330 |
Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
|
DIN EN ISO 16871 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
|
DIN EN ISO 17292 |
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004) |
|
DIN EN ISO 19879 |
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005) |
|
DIN EN ISO 21007-2 |
Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2005) |
|
DIN EN ISO 21049 |
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004 |
|
DIN EN ISO 2151 |
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004) |
|
DIN EN ISO 21787 |
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
|
DIN EN ISO 21809-1 |
(DRAFT) Petroleum and natural gas industries - External coatings for buried and submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO/DIS 21809-1:2006); English version prEN ISO 21809-1:2006 |
|
DIN EN ISO 21809-2 |
(DRAFT) Petroleum and natural gas industries - External coatings for buried and submerged pipelines used in pipeline transportation systems - Part 2: Fusion bonded epoxy coatings (ISO/DIS 21809-2:2006); English version prEN ISO 21809-2:2006 |
|
DIN EN ISO 2398 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
|
DIN EN ISO 2503 |
Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998) |
|
DIN EN ISO 2505 |
Thermoplastics pipes - Longitudinal reversion - Test methods and parameters (ISO 2505:2005) |
|
DIN EN ISO 3126 |
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
|
DIN EN ISO 3994 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); English version of DIN EN ISO 3994 |
|
DIN EN ISO 4080 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991) |
|
DIN EN ISO 4126-1 |
Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004) |
|
DIN EN ISO 4126-5 |
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004) |
|
DIN EN ISO 4126-7 |
Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004) |
|
DIN EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
|
DIN EN ISO 5198 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987) |
|
DIN EN ISO 5199 |
Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
|
DIN EN ISO 5771 |
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (including Corr 1:1995) (ISO 5771:1994) |
|
DIN EN ISO 5774 |
Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); English version of DIN EN ISO 5774 |
|
DIN EN ISO 6134 |
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005) |
|
DIN EN ISO 6224 |
Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997 |
|
DIN EN ISO 6259-1 |
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); English version of DIN EN ISO 6259-1 |
|
DIN EN ISO 6708 |
Pipework components - Definition and selection of DN (nominal size) |
|
DIN EN ISO 6803 |
Rubber and plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994) |
|
DIN EN ISO 6806 |
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992) |
|
DIN EN ISO 6807 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
|
DIN EN ISO 6808 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); English version of DIN EN ISO 6808 |
|
DIN EN ISO 7233 |
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991) |
|
DIN EN ISO 7291 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); English version of DIN EN ISO 7291 |
|
DIN EN ISO 7369 |
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 |
|
DIN EN ISO 7662 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) |
|
DIN EN ISO 7686 |
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005) |
|
DIN EN ISO 8028 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); English version of DIN EN ISO 8028 |
|
DIN EN ISO 8030 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) |
|
DIN EN ISO 8031 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993) |
|
DIN EN ISO 8032 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
|
DIN EN ISO 8033 |
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006) |
|
DIN EN ISO 8330 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); English version of DIN EN ISO 8330 |
|
DIN EN ISO 8434-1 |
Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994) |
|
DIN EN ISO 8580 |
Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) |
|
DIN EN ISO 8795 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); English version of DIN EN ISO 8795 |
|
DIN EN ISO 9080 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003) |
|
DIN EN ISO 9906 |
Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999) |
|
DIN EN ISO 9967 |
Thermoplastics pipes - Determination of creep ratio (ISO 9967:1994) |
|
DIN EN ISO 9969 |
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:1994) |
|
DIN ISO 10763 |
Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994) |
|
DIN ISO 12238 |
Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001) |
|
DIN ISO 15552 |
Pneumatik fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions (ISO 15552:2004) |
|
DIN ISO 21287 |
Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004) |
|
DIN ISO 3019-2 |
Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001) |
|
DIN ISO 3322 |
Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985) |
|
DIN ISO 5599-1 |
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001) |
|
DIN ISO 6020-1 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998) |
|
DIN ISO 7181 |
Hydraulic fluid power - Cylinders - Bore and rod area ratios (ISO 7181:1991) |
|
DIN ISO 9905 |
Technical specifications for centrifugal pumps - Class I (ISO 9905:1994) |
|
DIN ISO 9908 |
Centrifugal pumps - Technical specifications for centrifugal pumps; class III (ISO 9908:1993) |