|
DIN 884-2 |
Cylindrical milling cutters; technical delivery conditions |
|
DIN 885-2 |
Side milling cutters; technical delivery conditions |
|
DIN 9869-1 |
Terms for Tools for the Manufacture of Thin, Primarily Surface-intensive Workpieces; Classification |
|
DIN 9869-2 |
Terms for Pressworking Tools; Cutting Tools |
|
DIN 9870-1 |
Terms for Stamping Practice; Production Processes and Tools; General Terms and Alphabetical Survey |
|
DIN 9870-2 |
Terms for Stamping Practice; Production Processes and Tools for Severing |
|
DIN 9870-3 |
Terms for Stamping Practice; Production Processes and Tools for Forming by Bending |
|
DIN EN 10052 |
Vocabulary of heat treatment terms for ferrous products |
|
DIN EN 1011-1 |
Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (includes amendment A1:2002) |
|
DIN EN 1011-3 |
Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; English version of DIN EN 1011-3 |
|
DIN EN 10310 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
|
DIN EN 1043-1 |
Hardness testing of welds in metallic materials - Hardness test on arc welded joints |
|
DIN EN 12062 |
Non-destructive testing of welds - General rules for metallic materials (includes Amendment A1) |
|
DIN EN 12476 |
Phosphate conversion coatings of metals - Method of specifying requirements; English version of DIN EN 12476 |
|
DIN EN 1248 |
Foundry machinery - Safety requirements for abrasive blasting equipment; English version of DIN EN 1248 |
|
DIN EN 1289 |
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (includes Amendment A1:2002) |
|
DIN EN 13523-0 |
Coil coated metals - Test methods - Part 0: General introduction and list of test methods; English version of DIN EN 13523-0 |
|
DIN EN 13523-25 |
Coil coated metals - Test methods - Part 25: Resistance to humidity |
|
DIN EN 13736 |
Safety of machine tools - Pneumatic presses |
|
DIN EN 1403 |
Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
|
DIN EN 14163 Berichtigung 1 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text german and english, Corrigenda to DIN EN 14163:2002-09; German and English version EN 14163:2001/AC:2006 |
|
DIN EN 1418 |
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
|
DIN EN 1435 |
Non-destructive testing of welds - Radiographic testing of welded joints (includes Amendment A1) |
|
DIN EN 14700 |
Welding consumables - Welding consumables for hard-facing |
|
DIN EN 14879-3 |
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
|
DIN EN 15159-1 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories |
|
DIN EN 560 |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
|
DIN EN 746-1 |
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
|
DIN EN 746-4 |
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4 |
|
DIN EN ISO 10042 |
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005) |
|
DIN EN ISO 11126-10 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000) |
|
DIN EN ISO 11126-7 |
Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995, including Technical Corrigendum 1:1999) |
|
DIN EN ISO 13919-1 |
Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
|
DIN EN ISO 14922-3 |
Thermal spraying - Quality requirements for thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
|
DIN EN ISO 15614-11 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
|
DIN EN ISO 17659 |
Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002); Trilingual version EN ISO 17659:2004 |
|
DIN EN ISO 17660-1 |
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
|
DIN EN ISO 17660-2 |
Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
|
DIN EN ISO 2064 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996); English version of DIN EN ISO 2064 |
|
DIN EN ISO 3613 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); English version of DIN EN ISO 3613 |
|
DIN EN ISO 3834-2 |
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
|
DIN EN ISO 3834-3 |
Quality requirements for fusion welding for metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
|
DIN EN ISO 3834-4 |
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
|
DIN EN ISO 3861 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995) |
|
DIN EN ISO 3892 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); English version of DIN EN ISO 3892 |
|
DIN EN ISO 6789 |
Assembly of tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
|
DIN EN ISO 8503-3 |
Surface roughness characteristics of blast-cleaned steel substrates - Method for the calibration of ISO surface profile comparators and for the determination of surface profile using a focusing microscope (ISO 8503-3:1988) |
|
DIN EN ISO 8662-4 |
Hand-held portable power tools - Measurement of vibrations at the handle - Grinders (ISO 8662-4:1994) |
|
DIN EN ISO 8662-8 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
|
DIN EN ISO 9606-2 |
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
|
DIN IEC 60050-351 |
(DRAFT) International Electrotechnical Vocabulary - Part 351: Control Technology (IEC 65/324/CDV:2003) |
|
DIN IEC 61190-1-2 |
(DRAFT) Attachment materials for electronic assembly - Part 1-2 : Requirements for soldering paste for high-quality interconnects in electronics assembly (IEC 91/520/CD:2005) |
|
DIN ISO 10791-7 |
Test conditions for machining centres - Part 7: Accuracy of a finished test piece (ISO 10791-7:1998) |
|
DIN ISO 10887 |
Key type three-jaw drill chucks - Specification (ISO 10887:1999) |
|
DIN ISO 10889-2 |
Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2004) |
|
DIN ISO 10889-6 |
Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat (ISO 10889-6:2004) |
|
DIN ISO 10889-7 |
Tool holders with cylindrical shank - Part 7: Type F with taper seat (ISO 10889-7:2004) |
|
DIN ISO 11901-1 |
Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:2003) |
|
DIN ISO 15488 |
Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003) |
|
DIN ISO 1832 |
Indexable inserts for cutting tools - Designation (ISO 1832:2004) |
|
DIN ISO 230-2 |
Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes (ISO 230-2:1997) |
|
DIN ISO 239 |
Drill chuck tapers (ISO 239:1999) |
|
DIN ISO 6106 |
Abrasive products - Checking the grit size of superabrasives (ISO 6106:2005) |
|
DIN ISO 691 |
Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005) |
|
DIN ISO 8764-2 |
Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004) |
|
DIN ISO 8976 |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976:2004) |
|
DIN 32506-4 |
Testing of solderability for soft soldering; Measurement of wetting force; Testing, Assessment |
|
DIN EN 1011-2 |
Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels; English version of DIN EN 1011-2 |
|
DIN EN 1011-4 |
Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; English version of DIN EN 1011-4 |
|
DIN EN 1011-5 |
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
|
DIN EN 1011-6 |
Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
|
DIN EN 1011-7 |
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
|
DIN EN 1011-8 |
Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons |
|
DIN EN 10169-1 |
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
|
DIN EN 10169-2 |
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
|
DIN EN 10169-3 |
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
|
DIN EN 10244-1 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; English version of DIN EN 10244-1 |
|
DIN EN 10244-2 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; English version of DIN EN 10244-2 |
|
DIN EN 10244-3 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; English version of DIN EN 10244-3 |
|
DIN EN 10244-4 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; English version of DIN EN 10244-4 |
|
DIN EN 10244-5 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; Enlgish version of DIN EN 10244-5 |
|
DIN EN 10244-6 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; Enlgish version of DIN EN 10244-6 |
|
DIN EN 10245-1 |
Steel wire and wire products - Organic coatings on wire - Part 1: General rules; English version of DIN EN 10245-1 |
|
DIN EN 10245-2 |
Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; English version of DIN EN 10245-2 |
|
DIN EN 10245-3 |
Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; English version of DIN EN 10245-3 |
|
DIN EN 10245-4 |
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
|
DIN EN 10246-10 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; English version of DIN EN 10246-10 |
|
DIN EN 10246-16 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-16 |
|
DIN EN 10246-8 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; English version of DIN EN 10246-8 |
|
DIN EN 10246-9 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections; English version of DIN EN 10246-9 |
|
DIN EN 10288 |
Steel tubes and fittings for on and offshore pipelines - External two-layer extruded polyethylene based coatings |
|
DIN EN 10289 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
|
DIN EN 10290 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
|
DIN EN 10298 |
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
|
DIN EN 10300 |
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
|
DIN EN 10301 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
DIN EN 10318 |
Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
|
DIN EN 10329 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
|
DIN EN 1043-2 |
Hardness testing of welds in metallic materials - Part 2: Micro hardness testing on welded joints |
|
DIN EN 1044 |
Brazing - Filler metals |
|
DIN EN 1045 |
Fluxes for brazing - Classification and technical delivery conditions |
|
DIN EN 1083-1 |
Power-driven brushes -Part 1: Definitions and nomenclature |
|
DIN EN 1083-2 |
Power-driven brushes -Part 2: Safety requirements |
|
DIN EN 12068 |
External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
|
DIN EN 12070 |
Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification |
|
DIN EN 12074 |
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes; English version of DIN EN 12074 |
|
DIN EN 12330 |
Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel; English version of DIN EN 12330 |
|
DIN EN 12348 |
Core drilling machines on stand - Safety; English version of DIN EN 12348 |
|
DIN EN 12373-1 |
Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; English version of DIN EN 12373-1 |
|
DIN EN 12373-10 |
Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
|
DIN EN 12373-11 |
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; English version of DIN EN 12373-11 |
|
DIN EN 12373-12 |
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12 |
|
DIN EN 12373-13 |
Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; English version of DIN EN 12373-13 |
|
DIN EN 12373-14 |
Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method; English version of DIN EN 12373-14 |
|
DIN EN 12373-15 |
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; English version of DIN EN 12373-15 |
|
DIN EN 12373-16 |
Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; English version of DIN EN 12373-16 |
|
DIN EN 12373-18 |
Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; English version of DIN EN 12373-18 |
|
DIN EN 12373-19 |
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; English version of DIN EN 12373-19 |
|
DIN EN 12373-2 |
Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
|
DIN EN 12373-3 |
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
|
DIN EN 12373-5 |
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
|
DIN EN 12373-6 |
Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
|
DIN EN 12373-7 |
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
|
DIN EN 12373-9 |
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
|
DIN EN 12413 |
Safety requirements for bonded abrasive products |
|
DIN EN 12417 |
Machine tools - Safety - Machining centres (includes Amendment A1:2006) |
|
DIN EN 1247 |
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
|
DIN EN 12478 |
Safety of machine tools - Large numerically controlled turning machines and turning centres; English version of DIN EN 12478 |
|
DIN EN 12487 |
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; English version of DIN EN 12487 |
|
DIN EN 12508 |
Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000 |
|
DIN EN 12517-1 |
Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
|
DIN EN 12536 |
Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification; English version of DIN EN 12536 |
|
DIN EN 12540 |
Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; English version of DIN EN 12540 |
|
DIN EN 12549 |
Acoustics - Noise test code for fastener driving tools - Engineering method |
|
DIN EN 12584 |
Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology; Trilingual version EN 12584:1999 |
|
DIN EN 12622 |
Safety of machine tools - Hydraulic press brakes; English version of DIN EN 12622 |
|
DIN EN 1265 |
Noise test code for fondry machines and equipment; English version of DIN EN 1265 |
|
DIN EN 12717 |
Safety of machine tools - Drilling machines; English version of DIN EN 12717 |
|
DIN EN 1274 |
Thermal spraying - Powders - Composition, technical supply conditions |
|
DIN EN 12753 |
Termical cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
|
DIN EN 12797 |
Brazing - Destructive tests of brazed joints; English version of DIN EN 12797 |
|
DIN EN 12799 |
Brazing - Non-destructive examination of brazed joints; English version of DIN EN 12799 |
|
DIN EN 12814-1 |
Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test |
|
DIN EN 12814-1 Berichtigung 1 |
Corrigenda to DIN EN 12814-1:1999-12 |
|
DIN EN 12814-2 |
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; English version of DIN EN 12814-2 |
|
DIN EN 12814-3 |
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including Amendment A1:2005) |
|
DIN EN 12814-4 |
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; English version of DIN EN 12814-4 |
|
DIN EN 12814-5 |
Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; English version of DIN EN 12814-5 |
|
DIN EN 12814-6 |
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; English version of DIN EN 12814-6 |
|
DIN EN 12814-7 |
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
|
DIN EN 12814-8 |
Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; English version of DIN EN 12814-8 |
|
DIN EN 12840 |
Safety of machine tools - Manually controlled turning machines with or without automatic control; English version of DIN EN 12840 |
|
DIN EN 12883 |
Founding - Equipment for the production of lost patterns for the lost wax casting process; English version of DIN EN 12883 |
|
DIN EN 1290 |
Non-destructive testing of welds - Magnetic particle testing of welds (includes Amendment A1:2002) |
|
DIN EN 1291 |
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (includes Amendment A1:2002) |
|
DIN EN 12921-2 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
|
DIN EN 12921-3 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
|
DIN EN 12921-4 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents |
|
DIN EN 12943 |
Filler materials for thermoplastics - Scope, designation, requirements, tests |
|
DIN EN 12957 |
Machine tools - Safety - Electrodischarge machines; English version of DIN EN 12957 |
|
DIN EN 13067 |
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies |
|
DIN EN 13100-1 |
Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; English version DIN EN 13100-1 |
|
DIN EN 13100-2 |
Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2004 |
|
DIN EN 13100-3 |
Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
|
DIN EN 13128 |
Safety of machine tools - Milling machines (including boring machines) (includes Amendment A1:2006) |
|
DIN EN 13133 |
Brazing - Brazer approval; English version of DIN EN 13133 |
|
DIN EN 13134 |
Brazing - Procedure approval; English version of DIN EN 13134 |
|
DIN EN 13143 |
Metallic and other inorganic coatings - Definitions and conventions concerning porosity |
|
DIN EN 13144 |
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test |
|
DIN EN 1320 |
Destructive tests on welds in metallic materials - Fracture test |
|
DIN EN 1321 |
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
|
DIN EN 13214 |
Thermal spraying - Thermal spray coordination - Tasks and responsibilities; English version of DIN EN 13214 |
|
DIN EN 13218 |
Machine tools - Safety - Stationary grinding machines |
|
DIN EN 13236 |
Safety requirements for superabrasives; English version of DIN EN 13236 |
|
DIN EN 13236/A1 |
Safety requirements for superabrasives |
|
DIN EN 1326 |
Gas welding equipment - Small kits for gas brazing and welding |
|
DIN EN 13347 |
Copper and copper alloys - Rod and wire for welding and braze welding |
|
DIN EN 13438 |
Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes |
|
DIN EN 13479 |
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
|
DIN EN 13507 |
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; English version of DIN EN 13507 |
|
DIN EN 13523-1 |
Coil coated metals - Test methods - Part 1: Coating thickness; English version of DIN EN 13523-1 |
|
DIN EN 13523-10 |
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation; English version of DIN EN 13523-10 |
|
DIN EN 13523-11 |
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
|
DIN EN 13523-12 |
Coil coated metals - Test methods - Part 12: Resistance to scratching |
|
DIN EN 13523-13 |
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
|
DIN EN 13523-14 |
Coil coated metals - Test methods - Part 14: Chalking (Helmen method); English version of DIN EN 13523-14 |
|
DIN EN 13523-15 |
Coil coated metals - Test methods - Part 15: Metamerism |
|
DIN EN 13523-16 |
Coil coated metals - Test methods - Part 16: Resistance to abrasion |
|
DIN EN 13523-17 |
Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
|
DIN EN 13523-18 |
Coil coated metals - Test methods - Part 18: Resistance to staining |
|
DIN EN 13523-19 |
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
|
DIN EN 13523-2 |
Coil coated metals - Test methods - Part 2: Specular gloss; English version of DIN EN 13523-2 |
|
DIN EN 13523-20 |
Coil coated metals - Test methods - Part 20: Foam adhesion |
|
DIN EN 13523-21 |
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
|
DIN EN 13523-22 |
Coil coated metals - Test methods - Part 22: Colour difference; Visual comparison |
|
DIN EN 13523-23 |
Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide |
|
DIN EN 13523-24 |
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
|
DIN EN 13523-26 |
Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
|
DIN EN 13523-3 |
Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; English version of DIN EN 13523-3 |
|
DIN EN 13523-4 |
Coil coated metals - Test methods - Part 4: Pencil hardness; English version of DIN EN 13523-4 |
|
DIN EN 13523-5 |
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); English version of DIN EN 13523-5 |
|
DIN EN 13523-6 |
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
|
DIN EN 13523-7 |
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); English version of DIN EN 13523-7 |
|
DIN EN 13523-8 |
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
|
DIN EN 13523-9 |
Coil coated metals - Test methods - Part 9: Resistance to water immersion; English version of DIN EN 13523-9 |
|
DIN EN 13603 |
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
|
DIN EN 13622 |
Gas welding equipment - Terminology - Terms used for gas welding equipment; Trilingual version EN 13622:2002 |
|
DIN EN 13705 |
Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) |
|
DIN EN 13736 Berichtigung 1 |
Safety of machine tools - Pneumatic presses, Corrigendum 1 to DIN EN 13736:2003-06 |
|
DIN EN 13743 |
Safety requirements for coated abrasives; English version of DIN EN 13743 |
|
DIN EN 13788 |
Machine tools - Safety - Multi-spindle automatic turning machines; English version of DIN EN 13788 |
|
DIN EN 13811 |
Sherardizing - Zinc diffusion coatings on ferrous products - Specification |
|
DIN EN 13858 |
Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
|
DIN EN 13887 |
Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
|
DIN EN 13898 |
Machine tools - Safety - Sawing machines for cold metal |
|
DIN EN 1395-1 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements |
|
DIN EN 1395-2 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
|
DIN EN 1395-3 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying |
|
DIN EN 1395-4 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying |
|
DIN EN 1395-5 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers |
|
DIN EN 1395-6 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems |
|
DIN EN 1395-7 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
|
DIN EN 13985 |
Machine tools - Safety - Guillotine shears |
|
DIN EN 14070 |
Safety of machine tools - Transfer and special purpose machines |
|
DIN EN 14163 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English |
|
DIN EN 14295 |
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
|
DIN EN 14324 |
Brazing - Guidance on the application of brazed joints |
|
DIN EN 14431 |
Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture |
|
DIN EN 14462 |
Surface treatment equipment - Noise test code for surface treatment equipment including its ancilliary handling equipment - Accuracy grades 2 and 3 |
|
DIN EN 14483-1 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature |
|
DIN EN 14483-2 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours EN 14483-2:2004 |
|
DIN EN 14483-3 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel |
|
DIN EN 14483-4 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel |
|
DIN EN 14483-5 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems |
|
DIN EN 14532-1 |
Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
|
DIN EN 14532-2 |
Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
|
DIN EN 14532-3 |
Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
|
DIN EN 14571 |
Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method |
|
DIN EN 14610 |
Welding and allied processes - Definitions of metal welding processes; Trilingual version EN 14610:2004 |
|
DIN EN 14612 |
Space product assurance - Verification and approval of automatic machine wave soldering |
|
DIN EN 14616 |
Thermal spraying - Recommendations for thermal spraying |
|
DIN EN 14640 |
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification |
|
DIN EN 14665 |
Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings |
|
DIN EN 14673 |
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
|
DIN EN 14717 |
Welding and allied processes - Environmental check list |
|
DIN EN 14728 |
Imperfections in thermoplastic welds - Classification |
|
DIN EN 14730-1 |
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
|
DIN EN 14730-2 |
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds |
|
DIN EN 14863 |
Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
|
DIN EN 14864 |
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification |
|
DIN EN 14866 |
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
|
DIN EN 14879-1 |
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
|
DIN EN 14879-2 |
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
|
DIN EN 14901 |
Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
|
DIN EN 14919-1 |
(DRAFT) Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines (ISO 15589-1:2003 modified); English version prEN 14919-1:2004 |
|
DIN EN 15159-2 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock |
|
DIN EN 15159-3 |
Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 3: Thermal shock resistance |
|
DIN EN 15189 |
Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
|
DIN EN 1539 |
Dryers and ovens, in which flammable substances are released - Safety requirements; English version of DIN EN 1539:200 |
|
DIN EN 1547 |
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; English version of DIN EN 1547 |
|
DIN EN 1550 |
Safety of machine tools - Safety requirements for the design and construction of work-holding chucks |
|
DIN EN 1597-1 |
Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys |
|
DIN EN 1597-2 |
Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel |
|
DIN EN 1597-3 |
Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld |
|
DIN EN 1599 |
Covered electrodes for manual metal arc welding of creep-resisting steels - Classification |
|
DIN EN 1600 |
Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification |
|
DIN EN 1668 |
Rods, wires, deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
|
DIN EN 1708-1 |
Welding - Basic welded joint details in steel - Part 1: Pressurized components |
|
DIN EN 1708-2 |
Welding - Basic weld joint details in steel - Part 2: Not internally pressurized components; English version of DIN EN 1708-2 |
|
DIN EN 1711 |
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; English version of DIN EN 1711 |
|
DIN EN 1712 |
Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels (includes Amendment A1:2002) |
|
DIN EN 1713 |
Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (includes Amendment A1) |
|
DIN EN 20865 |
Slots in platens for projection welding machines (ISO 865:1981); german version EN 20865:1991 |
|
DIN EN 22401 |
Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972) |
|
DIN EN 22568 |
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988); german version EN 22568:1989 |
|
DIN EN 24230 |
Hand and machine-operated circular screwing dies for taper pipe threads, R series (ISO 4230:1987); german version EN 24230:1989 |
|
DIN EN 24231 |
Hand and machine-operated circular screwing dies for parallel pipe threads, G series (ISO 4231:1987); german version EN 24231:1989 |
|
DIN EN 2500-6 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 6: Specific requirements for filler metals for brazing; inactive for new design |
|
DIN EN 25822 |
Spot welding equipment; taper plug gauges and taper ring gauges (ISO 5822:1988); german version EN 25822:1991 |
|
DIN EN 25967 |
Taps for thread cutting; nomenclature of the main types and terminology (ISO 5967:1981); german version EN 25967:1989 |
|
DIN EN 25967 |
Taps for thread cutting; nomenclature of the main types and terminology (ISO 5967:1981); german version EN 25967:1989 |
|
DIN EN 25968 |
Circular screwing dies; terminology (ISO 5968:1981); german version EN 25968:1989 |
|
DIN EN 25968 |
Circular screwing dies; terminology (ISO 5968:1981); german version EN 25968:1989 |
|
DIN EN 27286 |
Graphical symbols for resistance welding equipment (ISO 7286:1986); german version EN 27286:1991 |
|
DIN EN 27963 |
Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985); german version EN 27963:1992 |
|
DIN EN 28167 |
Projections for resistance welding (ISO 8167:1989); german version EN 28167:1992 |
|
DIN EN 28206 |
Acceptance testing for oxygen cutting machines; testing the accuracy and operational characteristics (ISO 8206:1991); german version EN 28206:1992 |
|
DIN EN 28430-1 |
Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988); german version EN 28430-1:1992 |
|
DIN EN 28430-2 |
Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988); german version EN 28430-2:1992 |
|
DIN EN 28430-3 |
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988); german version EN 28430-3:1992 |
|
DIN EN 288-9 |
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for on land and offshore site butt welding of transmission pipelines |
|
DIN EN 29313 |
Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992 |
|
DIN EN 29454-1 |
Soft soldering fluxes; classification and requirements; classification, labelling and packaging (ISO 9454-1:1990) |
|
DIN EN 29455-1 |
Soft soldering fluxes; test methods; determination of non-volatile matter by the gravimetric method (ISO 9455-1:1990) |
|
DIN EN 29455-11 |
Soft soldering fluxes; test methods; solubility of flux residues (ISO 9455-11:1991) |
|
DIN EN 29455-14 |
Soft soldering fluxes; test methods; assessment of tackniness of flux residues (ISO 9455-14:1991) |
|
DIN EN 29455-5 |
Soft soldering fluxes; test methods; copper mirror test (ISO 9455-5:1992) |
|
DIN EN 29455-8 |
Soft soldering fluxes; test methods; determination of zinc content (ISO 9455-8:1991) |
|
DIN EN 3875 |
(DRAFT) Aerospace series - Metallic materials - Filler metal for brazing; technical specification |
|
DIN EN 3877 |
(DRAFT) Aerospace series - Metallic materials - Test method; determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys |