|
DIN EN 12530 |
Castors and wheels - Castors and wheels for manually propelled institutional applications |
|
DIN EN 12532 |
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) |
|
DIN EN 12533 |
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
|
DIN EN 12756 |
Mechanical seals - Principal dimensions, designation and material codes; English version of DIN EN 12756 |
|
DIN EN 13271 |
Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints |
|
DIN EN 13298 |
Railway applications - Suspension components - Helical suspension springs, steel |
|
DIN EN 13411-1 |
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
|
DIN EN 13411-3 |
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
|
DIN EN 13411-5 |
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
|
DIN EN 13411-6 |
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
|
DIN EN 13411-7 |
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
|
DIN EN 13446 |
Wood-based panels - Determination of withdrawal capacity of fasteners |
|
DIN EN 14218 |
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
|
DIN EN 14219 |
Hexagon nuts with flange - Small series (ISO 15072:1999, modified) |
|
DIN EN 14831 |
Fasteners - Tightening performance - Torque/Angle simplified test method |
|
DIN EN 1514-2 |
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
|
DIN EN 1515-1 |
Flanges and their joints - Bolting - Part 1: Selection of bolting |
|
DIN EN 1515-2 |
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; English version of DIN EN 1515-2 |
|
DIN EN 1515-3 |
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated |
|
DIN EN 1663 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) |
|
DIN EN 1664 |
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) |
|
DIN EN 1666 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) |
|
DIN EN 20225 |
Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991 |
|
DIN EN 20273 |
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 |
|
DIN EN 22340 |
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992 |
|
DIN EN 24015 |
Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 |
|
DIN EN 26157-1 |
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 |
|
DIN EN 27434 |
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992 |
|
DIN EN 27435 |
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992 |
|
DIN EN 28736 |
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992 |
|
DIN EN 28737 |
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992 |
|
DIN EN 28749 |
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992 |
|
DIN EN 60086-1 |
(DRAFT) Primary batteries - Part 1: General (IEC 35/1231/CDV:2005); German version prEN 60086-1:2005 |
|
DIN EN 60086-1 |
(DRAFT) Primary batteries - Part 1: General (IEC 35/1231/CDV:2005); German version prEN 60086-1:2005 |
|
DIN EN 60086-1 |
(DRAFT) Primary batteries - Part 1: General (IEC 35/1231/CDV:2005); German version prEN 60086-1:2005 |
|
DIN EN ISO 10485 |
Cone proof load test on nuts (ISO 10485:1991) |
|
DIN EN ISO 10510 |
Tapping screw and washer assemblies with plain washers (ISO 10510:1999) |
|
DIN EN ISO 10512 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997) |
|
DIN EN ISO 10644 |
Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998) |
|
DIN EN ISO 10666 |
Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); English version DIN EN ISO 10666 |
|
DIN EN ISO 10669 |
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
|
DIN EN ISO 10684 |
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) |
|
DIN EN ISO 11116-1 |
Gas cylinders - 17E tapered thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999) - English version EN ISO 11116-1 |
|
DIN EN ISO 11116-2 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999) |
|
DIN EN ISO 11381 |
Ophthalmic optics - Screw threads for use with spectacle frames (ISO 11 381:1994) |
|
DIN EN ISO 11688-1 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
DIN EN ISO 11688-2 |
Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); English version of DIN EN ISO 11688-2 |
|
DIN EN ISO 12777-1 |
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994); German version EN ISO 12777-1:1996 |
|
DIN EN ISO 12777-2 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000); English version of DIN EN ISO 12777-2 |
|
DIN EN ISO 12777-3 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
|
DIN EN ISO 13337 |
Spring-type straight pins, slotted, light duty (ISO 13337:1997) |
|
DIN EN ISO 13691 |
Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002 |
|
DIN EN ISO 14580 |
Hexalobular socket cheese head screws (ISO 14580:2001) |
|
DIN EN ISO 14580 Berichtigung 1 |
Hexalobular socket cheese head screws (ISO 14580:2001); Corrigenda to DIN EN ISO 14580:2002-05 |
|
DIN EN ISO 14583 Berichtigung 1 |
Hexalobular socket pan head screws (ISO 14583:2001); Corrigenda to DIN EN ISO 14583:2002-05 |
|
DIN EN ISO 14584 |
Hexalobular socket raised countersunk head screws (ISO 14584:2001) |
|
DIN EN ISO 14585 |
Hexalobular socket pan head tapping screws (ISO 14585:2001) |
|
DIN EN ISO 14585 Berichtigung 1 |
Hexalobular socket pan head tapping screws (ISO 14585:2001); Corrigenda to DIN EN ISO 14585:2002-05 |
|
DIN EN ISO 14586 |
Hexalobular socket countersunk head tapping screws (ISO 14586:2001) |
|
DIN EN ISO 14587 |
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001) |
|
DIN EN ISO 14589 |
Blind rivets - Mechanical testing (ISO 14589:2000); English version of DIN EN ISO 14589 |
|
DIN EN ISO 14691 |
Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text) |
|
DIN EN ISO 15245-1 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001) |
|
DIN EN ISO 15245-2 |
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001) |
|
DIN EN ISO 15330 |
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); English version of DIN EN ISO 15330 |
|
DIN EN ISO 15480 |
Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); English version DIN EN ISO 15480 |
|
DIN EN ISO 15481 |
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); English version DIN EN ISO 15481 |
|
DIN EN ISO 15482 |
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); English version DIN EN ISO 15482 |
|
DIN EN ISO 15483 |
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); English version DIN EN ISO 15483 |
|
DIN EN ISO 1580 |
Slotted pan head screws - Product grade A (ISO 1580:1994) |
|
DIN EN ISO 15973 |
Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); English version of DIN EN ISO 15973 |
|
DIN EN ISO 15975 |
Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002) |
|
DIN EN ISO 15978 |
Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002) |
|
DIN EN ISO 15979 |
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002) |
|
DIN EN ISO 15980 |
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) |
|
DIN EN ISO 15981 |
Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002) |
|
DIN EN ISO 15982 |
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002) |
|
DIN EN ISO 15983 |
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002) |
|
DIN EN ISO 15984 |
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) |
|
DIN EN ISO 16048 |
Passivation of corrosion-resistant stainless steel fasteners (ISO 16048:2003) |
|
DIN EN ISO 16426 |
Fasteners - Quality assurance system (ISO 16426:2002) |
|
DIN EN ISO 16582 |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002) |
|
DIN EN ISO 16583 |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002) |
|
DIN EN ISO 16585 |
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002) |
|
DIN EN ISO 2009 |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994) |
|
DIN EN ISO 2010 |
Countersunk slotted raised head screws (common head style) - Product grade A (ISO 2010:1994) |
|
DIN EN ISO 21049 |
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004 |
|
DIN EN ISO 21670 |
Hexagon weld nuts with flange (ISO 21670:2003) |
|
DIN EN ISO 2342 |
Slotted headless screws with shank (ISO 2342:2003) |
|
DIN EN ISO 3506-4 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003) |
|
DIN EN ISO 4016 |
Hexagon head bolts - Product grade C (ISO 4016:1999); English version of DIN EN ISO 4016 |
|
DIN EN ISO 4018 |
Hexagon head screws - Product grade C (ISO 4018:1999); English version of DIN EN ISO 4018 |
|
DIN EN ISO 4757 |
Cross recesses for screws (ISO 4757:1983) |
|
DIN EN ISO 6157-2 |
Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
|
DIN EN ISO 7048 |
Cross recessed cheese head screws (ISO 7048:1998) |
|
DIN EN ISO 7090 |
Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000); English version of DIN EN ISO 7090 |
|
DIN EN ISO 7091 |
Plain washers - Normal series - Product grade C (ISO 7091:2000); English version of DIN EN ISO 7091 |
|
DIN EN ISO 7092 |
Plain washers - Small series - Product grade A (ISO 7092:2000); English version of DIN EN ISO 7092 |
|
DIN EN ISO 7719 |
Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997) |
|
DIN EN ISO 8733 |
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel (ISO 8733:1997) |
|
DIN EN ISO 8739 |
Grooved pins, full-length parallel grooved, with pilot (ISO 8739:1997) |
|
DIN EN ISO 8741 |
Grooved pins, half-length reverse-taper grooved (ISO 8741:1997) |
|
DIN EN ISO 8742 |
Grooved pins, one-third-length centre grooved (ISO 8742:1997) |
|
DIN EN ISO 8744 |
Grooved pins, full-length taper grooved (ISO 8744:1997) |
|
DIN EN ISO 8745 |
Grooved pins, half-length taper grooved (ISO 8745:1997) |
|
DIN EN ISO 8747 |
Grooved pins with countersunk head (ISO 8747:1997) |
|
DIN IEC 62339-1 |
(DRAFT) Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals (IEC 65D/106/CD:2004) |
|
DIN ISO 10069-1 |
Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:1991) |
|
DIN ISO 10069-2 |
Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
|
DIN ISO 10823 |
Guidelines for the selection of roller chain drives (ISO 10823:2004) |
|
DIN ISO 11901-2 |
Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO 11901-2:2004) |
|
DIN ISO 12128 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes (ISO 12128:1995) |
|
DIN ISO 12132 |
Plain bearings - Quality assurance of thin-walled half bearings - Design failure mode and effects analysis (ISO 12132:1999) |
|
DIN ISO 12240-1 |
Spherical plain bearings - Part 1: Radial spherical plain bearings (ISO 12240-1:1998) |
|
DIN ISO 12240-2 |
Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings (ISO 12240-2:1998) |
|
DIN ISO 12240-3 |
Spherical plain bearings - Part 3: Thrust spherical plain bearings (ISO 12240-3:1998) |
|
DIN ISO 12303 |
Plain bearings - Quality characteristics - Calculation of machine and process capabilities (ISO 12303:1995) |
|
DIN ISO 12307-2 |
Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter (ISO 12307-2:2000) |
|
DIN ISO 12308 |
Plain bearings - Quality assurance - Sample types - Definitions, applications and testing (ISO 12308:1994) |
|
DIN ISO 13012 |
Linear motion, recirculating ball, sleeve type rolling bearings - Accessories (ISO 13012:1998 + Corr 1:1999) |
|
DIN ISO 13778 |
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range (ISO 13778:1999) |
|
DIN ISO 14728-1 |
Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life (ISO 14728-1:2004) |
|
DIN ISO 14728-2 |
Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings (ISO 14728-2:2004) |
|
DIN ISO 15312 |
Rolling bearings - Thermal speed rating - Calculation and coefficients (ISO 15312:2003) |
|
DIN ISO 1891 |
(DRAFT) Fasteners - Terminology and nomenclature (ISO/DIS 1891:2007); Text in German, English and French |
|
DIN ISO 1940-1 Berichtigung 1 |
Corrigenda to DIN ISO 1940-1:2004-04 (ISO 1940-1:2003/Cor. 1:2005) |
|
DIN ISO 20806 |
Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 20806:2004) |
|
DIN ISO 3548 |
Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999) |
|
DIN ISO 3952-1 |
Simplified representation for kinematics - Part 1: Representation of motion of links; identical with ISO 3952-1:1981 |
|
DIN ISO 3952-2 |
Simplified representation for kinematics - Part 2: Representation of friction and gear mechanisms and cam mechanisms; identical with ISO 3952-2:1981 |
|
DIN ISO 3952-3 |
Simplified representation for kinematics - Part 3: Representation of geneva and ratchet mechanisms, couplings and brakes; identical with ISO 3952-3:1979 |
|
DIN ISO 3952-4 |
Simplified representation for kinematics - Part 4: Miscellaneous mechanisms and their components; identical with ISO 3952-4:1984 |
|
DIN ISO 4378-1 |
Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties (ISO 4378-1:1997) |
|
DIN ISO 4378-2 |
Plain bearings - Terms, definitions and classification - Part 2: Friction and wear (ISO 4378-2:1983) |
|
DIN ISO 4378-3 |
Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983) |
|
DIN ISO 4378-4 |
Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol (ISO 4378-4:1997) |
|
DIN ISO 4381 |
Plain bearings - Lead and tin casting alloys for multilayer plain bearings (ISO 4381:2000) |
|
DIN ISO 4384-1 |
Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000) |
|
DIN ISO 5294 |
Synchronous belt drives - Pulleys (ISO 5294:1989) |
|
DIN ISO 5845-1 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995) |
|
DIN ISO 7148-1 |
Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals (ISO 7148-1:1999) |
|
DIN ISO 7148-2 |
Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials (ISO 7148-2:1999) |
|
DIN ISO 7475 |
Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station (ISO 7475:2002) |
|
DIN ISO 7905-1 |
Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995) |
|
DIN ISO 7905-2 |
Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1995) |
|
DIN ISO 7905-3 |
Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material (ISO 7905-3:1995) |
|
DIN ISO 7905-4 |
Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996) |