|
DIN EN 10243-2 |
Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; English version of DIN EN 10243-2 |
|
DIN EN 10243-2 Berichtigung 1 |
Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; Corrigenda to DIN EN 10243-2:2000-06 |
|
DIN EN 10246-12 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; English version of DIN EN 10246-12 |
|
DIN EN 10248-1 |
Hot rolled non-alloy steel sheet piling - Technical delivery conditions |
|
DIN EN 10248-2 |
Hot rolled non-alloy steel sheet piling - Tolerances on shape and dimensions |
|
DIN EN 10249-1 |
Cold formed non-alloy steel sheet piling - Technical delivery conditions |
|
DIN EN 10253-1 |
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
|
DIN EN 10264-3 |
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
|
DIN EN 10267 |
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
|
DIN EN 10270-3 |
Steel wire for mechanical springs - Part 3: Stainless spring steel wire; English version of DIN EN 10270-3 |
|
DIN EN 10271 |
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
|
DIN EN 10279 |
Hot rolled steel channels - Tolerances on shape, dimensions and mass; English version of DIN EN 10279 |
|
DIN EN 10293 |
Steel castings for general engineering uses |
|
DIN EN 10294-1 |
Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
|
DIN EN 10297-2 |
Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
|
DIN EN 10305-6 |
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
DIN EN 10326 |
Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
|
DIN EN 10327 |
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
|
DIN EN 12163 |
Copper and copper alloys - Rod for general purposes |
|
DIN EN 12385-3 |
Steel wire ropes - Safety - Part 3: Information for use and maintenance |
|
DIN EN 12501-1 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General |
|
DIN EN 12501-2 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and unalloyed ferrous materials |
|
DIN EN 12680-2 |
Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
|
DIN EN 12681 |
Founding - Radiographic examination |
|
DIN EN 13599 |
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
|
DIN EN 13601 |
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
|
DIN EN 13920-14 |
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings |
|
DIN EN 13920-2 |
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
|
DIN EN 13920-8 |
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
|
DIN EN 1559-2 |
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings; English version of DIN EN 1559-2 |
|
DIN EN 1562 |
Founding - Malleable cast irons |
|
DIN EN 1564 |
Founding - Austempered ductile cast irons |
|
DIN EN 1592-4 |
HF seam welded aluminium and aluminium alloy tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
|
DIN EN 1676 |
Aluminium and aluminium alloys - Alloyed aluminium ingots for remelting - Specifications; German version EN 1676:1996 |
|
DIN EN 1780-2 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
|
DIN EN 485-1 |
Aluminium and aluminium alloy sheet, strip and plate; technical delivery conditions |
|
DIN EN 485-3 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
|
DIN EN 485-4 |
Aluminium and aluminium alloy sheet, strip and plate; tolerances on shape and dimensions for cold-rolled products |
|
DIN EN 502 |
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
|
DIN EN 508-1 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; English version of DIN EN 508-1 |
|
DIN EN 508-2 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; English version of DIN EN 508-2 |
|
DIN EN 575 |
Aluminium master alloys produced by melting - Specifications |
|
DIN EN 586-2 |
Aluminium and aluminium alloy forgings - Mechanical properties and additional properties |
|
DIN EN 603-3 |
Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; English version of DIN EN 603-3 |
|
DIN EN 755-1 |
Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 755-5 |
Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Rectangular bars: tolerances on dimensions and form |
|
DIN EN ISO 11960 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004); English version EN ISO 11960:2004 |
|
DIN EN ISO 14284 |
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
|
DIN EN ISO 15156-3 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003 |
|
DIN EN ISO 15630-2 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); English version of DIN EN ISO 15630-2 |
|
DIN EN ISO 15630-3 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002) |
|
DIN EN ISO 2639 |
Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
|
DIN EN ISO 377 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997 + Corr 1:1997) |
|
DIN EN ISO 642 |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); English version of DIN EN ISO 642 |
|
DIN EN ISO 6506-4 |
Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005) |
|
DIN EN ISO 6507-2 |
Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005) |
|
DIN EN ISO 6507-3 |
Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005) |
|
DIN EN ISO 6508-1 |
Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005) |
|
DIN EN ISO 6508-3 |
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005) |
|
DIN EN ISO 9445 |
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002) |
|
DIN EN ISO 945 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975) |
|
DIN ISO 5755 |
Sintered metal materials - Specifications (ISO 5755:2001) |
|
DIN 18203-2 |
Tolerances for building - Part 2: Prefabricated steel components |
|
DIN EN 10001 |
Definition and classification of pig iron (English version of DIN EN 10001) |
|
DIN EN 10016-1 |
Non-alloy steel rod for drawing or cold rolling - General requirements |
|
DIN EN 10016-2 |
Non-alloy steel rod for drawing or cold rolling - Specific requirements for general purpose rod |
|
DIN EN 10016-3 |
Non-alloy steel rod for drawing or cold rolling - Specific requirements for rimmed and rimmed substitute low carbon steel rod |
|
DIN EN 10016-4 |
Non-alloy steel rod for drawing or cold rolling - Specific requirements for rod for special applications |
|
DIN EN 10017 |
Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
|
DIN EN 10021 |
General technical delivery conditions for steel products |
|
DIN EN 10024 |
Hot rolled steel taper flange I sections - Tolerances on shape and dimensions |
|
DIN EN 10025-4 |
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
|
DIN EN 10031 |
Semi-finished products for forging - Tolerances on dimensions, shape and mass |
|
DIN EN 10036 |
Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen (English version of DIN EN 10036) |
|
DIN EN 10055 |
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
|
DIN EN 10056-1 |
Structural steel equal and unequal leg angles - Part 1: Dimensions |
|
DIN EN 10056-2 |
Structural steel equal and unequal leg angles; tolerances on shape and dimensions |
|
DIN EN 10061 |
Hot rolled hexagon steel bars - Dimensions and tolerances on shape and dimensions |
|
DIN EN 10067 |
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
|
DIN EN 10071 |
Chemical analysis of ferrous materials; determination of manganese in steel and iron; electrometric titration method (English version of DIN EN 10071) |
|
DIN EN 10089 |
Hot rolled steels for quenched and tempered springs - Technical delivery conditions |
|
DIN EN 10090 |
Valve steels and alloys for internal combustion engines |
|
DIN EN 10095 |
Heat resisting steels and nickel alloys |
|
DIN EN 10106 |
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
|
DIN EN 10107 |
Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
|
DIN EN 10108 |
Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
|
DIN EN 10132-3 |
Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering; English version of DIN EN 10132-3 |
|
DIN EN 10136 |
Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method (English version of DIN EN 10136) |
|
DIN EN 10140 |
Cold rolled narrow steel strip - Tolerances on dimensions and shape |
|
DIN EN 10160 |
Ultrasonic testing of steel flat products of thickness equal or greater than 6 mm (reflection method) |
|
DIN EN 10164 |
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
|
DIN EN 10169-1 |
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
|
DIN EN 10169-2 |
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
|
DIN EN 10169-3 |
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
|
DIN EN 10177 |
Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method (English version of DIN EN 10177) |
|
DIN EN 10178 |
Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method (English version of DIN EN 10178) |
|
DIN EN 10179 |
Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrometric method (English version of DIN EN 10179) |
|
DIN EN 10181 |
Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method (English version of DIN EN 10181) |
|
DIN EN 10184 |
Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
|
DIN EN 10188 |
Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method (English version of DIN EN 10188) |
|
DIN EN 10200 |
Chemical analysis of ferrous materials; determination of boron in steel by spectrophotometry; german version EN 10200:1991 |
|
DIN EN 10202 |
Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; English version of DIN EN 10202 |
|
DIN EN 10207 |
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
|
DIN EN 10211 |
Determination of titanium in steel and iron - Flame atomic absorption spectrometric method |
|
DIN EN 10212 |
Chemical analysis of ferrous materials - Determination of arsenic in steel and iron by the spectrophotometric method |
|
DIN EN 10213-2 |
Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and elevated temperature |
|
DIN EN 10213-3 |
Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at low temperatures |
|
DIN EN 10213-4 |
Technical delivery conditions for steel castings for pressure purposes - Austenitic and austenitic-ferritic steel grades |
|
DIN EN 10217-3 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
DIN EN 10217-4 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
|
DIN EN 10217-5 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (includes Admendment A1:2005) |
|
DIN EN 10217-6 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
|
DIN EN 10218-1 |
Steel wire and wire products - General - Test methods |
|
DIN EN 10221 |
Surface quality classes for hot rolled steel bars and rod - Technical delivery conditions |
|
DIN EN 10222-1 |
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002) |
|
DIN EN 10222-2 |
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (includes Corrigendum AC:2000); English version of DIN EN 10222-2 |
|
DIN EN 10222-3 |
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
|
DIN EN 10222-4 |
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); English version of DIN EN 10222-4:1999 + A1:2001 |
|
DIN EN 10222-5 |
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; English version of DIN EN 10222-5 |
|
DIN EN 10223-1 |
Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire |
|
DIN EN 10223-2 |
Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes (includes Amendment A1:2004) |
|
DIN EN 10223-3 |
Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes |
|
DIN EN 10223-4 |
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
|
DIN EN 10223-5 |
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
|
DIN EN 10223-6 |
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
|
DIN EN 10223-7 |
Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing |
|
DIN EN 10228-2 |
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
|
DIN EN 10228-4 |
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
|
DIN EN 10229 |
Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
|
DIN EN 10230-1 |
Steel wire nails - Part 1: Loose nails for general applications |
|
DIN EN 10238 |
Automatically blast-cleaned and automatically prefabrication-primed structural steel products |
|
DIN EN 10244-1 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; English version of DIN EN 10244-1 |
|
DIN EN 10244-2 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; English version of DIN EN 10244-2 |
|
DIN EN 10244-3 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; English version of DIN EN 10244-3 |
|
DIN EN 10244-4 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; English version of DIN EN 10244-4 |
|
DIN EN 10244-5 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; Enlgish version of DIN EN 10244-5 |
|
DIN EN 10244-6 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; Enlgish version of DIN EN 10244-6 |
|
DIN EN 10245-1 |
Steel wire and wire products - Organic coatings on wire - Part 1: General rules; English version of DIN EN 10245-1 |
|
DIN EN 10245-2 |
Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; English version of DIN EN 10245-2 |
|
DIN EN 10245-3 |
Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; English version of DIN EN 10245-3 |
|
DIN EN 10245-4 |
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
|
DIN EN 10246-1 |
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
|
DIN EN 10246-10 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; English version of DIN EN 10246-10 |
|
DIN EN 10246-11 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; English version of DIN EN 10246-11 |
|
DIN EN 10246-13 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; English version of DIN EN 10246-13 |
|
DIN EN 10246-14 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-14 |
|
DIN EN 10246-15 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-15 |
|
DIN EN 10246-16 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-16 |
|
DIN EN 10246-17 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-17 |
|
DIN EN 10246-18 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; English version of DIN EN 10246-18 |
|
DIN EN 10246-2 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; English version of DIN EN 10246-2 |
|
DIN EN 10246-3 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; English version of DIN EN 10246-3 |
|
DIN EN 10246-4 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-4 |
|
DIN EN 10246-5 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; English version of DIN EN 10246-5 |
|
DIN EN 10246-6 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-6 |
|
DIN EN 10246-7 |
Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
|
DIN EN 10246-8 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections; English version of DIN EN 10246-8 |
|
DIN EN 10246-9 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections; English version of DIN EN 10246-9 |
|
DIN EN 10249-2 |
Cold formed non-alloy steel sheet piling - Tolerances on shape and dimensions |
|
DIN EN 10251 |
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
|
DIN EN 10252 |
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
|
DIN EN 10256 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel; English version of DIN EN 10256 |
|
DIN EN 10257-1 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
|
DIN EN 10257-2 |
Zinc or zinc alloy-coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
|
DIN EN 10263-3 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels; English version of DIN EN 10263-3 |
|
DIN EN 10264-1 |
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
|
DIN EN 10264-2 |
Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloyed steel wire for ropes for general applications |
|
DIN EN 10264-4 |
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
|
DIN EN 10265 |
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
|
DIN EN 10266 |
Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards |
|
DIN EN 10268 |
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
|
DIN EN 10272 |
Stainless steel bars for pressure purposes; English version of DIN EN 10272 |
|
DIN EN 10273 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties; English version of DIN EN 10273 |
|
DIN EN 10274 |
Metallic materials - Drop weight tear test |
|
DIN EN 10275 |
Metallic materials - Tube ring hydraulic pressure test |
|
DIN EN 10276-1 |
Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; English version of DIN EN 10276-1 |
|
DIN EN 10276-2 |
Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas |
|
DIN EN 10283 |
Corrosion-resistant steel castings |
|
DIN EN 10291 |
Metallic materials - Uniaxial creep testing in tension - Method of test; English version of DIN EN 10291 |
|
DIN EN 10295 |
Heat-resistant steel castings |
|
DIN EN 10296-1 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
|
DIN EN 10296-2 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
|
DIN EN 10302 |
Creep resisting steels, nickel and cobalt alloys |
|
DIN EN 10303 |
Thin magnetic steel sheet and strip for use at medium frequencies; English version of DIN EN 10303 |
|
DIN EN 10304 |
Magnetic materials (iron and steel) for use in relays; English version of DIN EN 10304 |
|
DIN EN 10306 |
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams; English version of DIN EN 10306 |
|
DIN EN 10307 |
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel flat products of thickness equal to or greater than 6 mm (reflection method); English version of DIN EN 10307 |
|
DIN EN 10308 |
Non-destructive testing - Ultrasonic testing of steel bars; English version of DIN EN 10308 |
|
DIN EN 10314 |
Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
|
DIN EN 10315 |
Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique |
|
DIN EN 10319-1 |
Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines |
|
DIN EN 10319-2 |
Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
|
DIN EN 10323 |
Steel wire and wire products - Bead wire |
|
DIN EN 10324 |
Steel wire and wire products - Hose reinforcement wire |
|
DIN EN 10325 |
Steel - Determination of yield strenght increase by the effect of heat treatment (Bake-Hardening-Index) |
|
DIN EN 10328 |
Iron and steel - Determination of the conventional depth of hardening after surface heating |
|
DIN EN 10333 |
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate) |
|
DIN EN 10334 |
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) |
|
DIN EN 10335 |
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel |
|
DIN EN 10341 |
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
|
DIN EN 1172 |
Copper and copper alloy sheet and strip for building purposes |
|
DIN EN 1173 |
Copper and copper alloys - Material condition or temper designation |
|
DIN EN 1179 |
Zinc and zinc alloys - Primary zinc |
|
DIN EN 12020-1 |
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery; Englisch version of DIN EN 12020-1 |
|
DIN EN 12020-2 |
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2 |
|
DIN EN 12060 |
Zinc and zinc alloys - Method of sampling - Specifications |
|
DIN EN 12165 |
Copper and copper alloys - Wrought and unwrought forging stock |
|
DIN EN 12166 |
Copper and copper alloys - Wire for general purposes |
|
DIN EN 12167 |
Copper and copper alloys - Profiles and rectangular bar for general purposes |
|
DIN EN 12168 |
Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); English version of DIN EN 12168:1998 + A1:2000 |
|
DIN EN 12258-1 |
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:1998 |
|
DIN EN 12258-2 |
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis; Trilingual version EN 12258-2:2004 |
|
DIN EN 12258-3 |
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-3:2003 |
|
DIN EN 12258-4 |
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry; Trilingual version EN 12258-4:2004 |
|
DIN EN 12373-1 |
Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; English version of DIN EN 12373-1 |
|
DIN EN 12373-10 |
Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
|
DIN EN 12373-11 |
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; English version of DIN EN 12373-11 |
|
DIN EN 12373-12 |
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12 |
|
DIN EN 12373-13 |
Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; English version of DIN EN 12373-13 |
|
DIN EN 12373-14 |
Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method; English version of DIN EN 12373-14 |
|
DIN EN 12373-15 |
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; English version of DIN EN 12373-15 |
|
DIN EN 12373-16 |
Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; English version of DIN EN 12373-16 |
|
DIN EN 12373-18 |
Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; English version of DIN EN 12373-18 |
|
DIN EN 12373-19 |
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; English version of DIN EN 12373-19 |
|
DIN EN 12373-2 |
Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
|
DIN EN 12373-3 |
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
|
DIN EN 12373-5 |
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
|
DIN EN 12373-6 |
Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
|
DIN EN 12373-7 |
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
|
DIN EN 12373-9 |
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
|
DIN EN 12384 |
Copper and copper alloys - Determination of spring bending limit on strip |
|
DIN EN 12385-1 |
Steel wire ropes - Safety - Part 1: General requirements |
|
DIN EN 12385-10 |
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
|
DIN EN 12385-2 |
Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
|
DIN EN 12385-4 |
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
|
DIN EN 12385-5 Berichtigung 1 |
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; Corrigenda to DIN EN 12385-5:2003-03 |
|
DIN EN 12385-5 Berichtigung 1 |
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; Corrigenda to DIN EN 12385-5:2003-03 |
|
DIN EN 12385-5 Berichtigung 1 |
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; Corrigenda to DIN EN 12385-5:2003-03 |
|
DIN EN 12385-6 |
Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
|
DIN EN 12385-7 |
Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts |
|
DIN EN 12385-8 |
Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
|
DIN EN 12385-9 |
Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
|
DIN EN 12392 |
Aluminium and aluminium alloys - Wrought stock products - Special requirements for products intended for the production of pressure equipment; English version of DIN EN 12392 |
|
DIN EN 12402 |
Lead and lead alloys - Methods of sampling for analysis |
|
DIN EN 12420 |
Copper and copper alloys - Forgings |
|
DIN EN 12421 |
Magnesium and magnesium alloys - Unalloyed magnesium |
|
DIN EN 12438 |
Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998 |
|
DIN EN 12441-1 |
Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method |
|
DIN EN 12441-10 |
Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
|
DIN EN 12441-11 |
Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
|
DIN EN 12441-2 |
Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method |
|
DIN EN 12441-3 |
Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; English version of DIN EN 12441-3 |
|
DIN EN 12441-4 |
Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method |
|
DIN EN 12441-5 |
Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method |
|
DIN EN 12441-6 |
Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method |
|
DIN EN 12441-7 |
Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction |
|
DIN EN 12441-8 |
Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
|
DIN EN 12441-9 |
Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
|
DIN EN 12449 |
Copper and copper alloys - Seamless, round tubes for general purposes |
|
DIN EN 12450 |
Copper and copper alloys - Seamless, round copper capillary tubes |
|
DIN EN 12451 |
Copper and copper alloys - Seamless, round tubes for heat exchangers |
|
DIN EN 12452 |
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
|
DIN EN 12454 |
Founding - Visual examination of surface discontinuities - Steel sand castings |
|
DIN EN 12473 |
General principles of cathodic protection in sea water; English version of DIN EN 12473 |
|
DIN EN 12474 |
Cathodic protection for submarine pipelines; English version of DIN EN 12474 |
|
DIN EN 12482-1 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
|
DIN EN 12482-2 |
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
|
DIN EN 12495 |
Cathodic protection for fixed steel offshore structures; English version of DIN EN 12495 |
|
DIN EN 12499 |
Internal cathodic protection of metallic structures |
|
DIN EN 12499 Berichtigung 1 |
Internal cathodic protection of metallic structures, Corrigenda to DIN EN 12499:2003-07 |
|
DIN EN 12500 |
Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; English version of DIN EN 12500 |
|
DIN EN 12502-1 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General |
|
DIN EN 12502-2 |
Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys |
|
DIN EN 12502-3 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot-dip galvanised ferrous materials |
|
DIN EN 12502-4 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels |
|
DIN EN 12502-5 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyd steels |
|
DIN EN 12513 |
Founding - Abrasion resistant cast irons; English version of DIN EN 12513 |
|
DIN EN 12548 |
Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
|
DIN EN 12588 |
Lead and lead alloys - Rolled lead sheet for building purposes |
|
DIN EN 12659 |
Lead and lead alloys - Lead |
|
DIN EN 1274 |
Thermal spraying - Powders - Composition, technical supply conditions |
|
DIN EN 12861 |
Copper and copper alloys - Scrap |
|
DIN EN 12883 |
Founding - Equipment for the production of lost patterns for the lost wax casting process; English version of DIN EN 12883 |
|
DIN EN 12890 |
Founding - Patterns, pattern equipment and core boxes for the production of sand moulds and sand cores; English version of DIN EN 12890 |
|
DIN EN 12892 |
Founding - Equipment for the production of lost patterns for the lost foam casting process; English version of DIN EN 12892 |
|
DIN EN 12893 |
Copper and copper alloys - Determination of spiral elongation number; English version of DIN EN 12893 |
|
DIN EN 12938 |
Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); English version of DIN EN 12938:1999 + AC:2000 |
|
DIN EN 12954 |
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines; English version of DIN EN 12954 |
|
DIN EN 1301-1 |
Aluminium and aluminium alloy drawn wire - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 1301-2 |
Aluminium and aluminium alloy drawn wire - Part 2: Mechanical properties |
|
DIN EN 1301-3 |
Aluminium and aluminium alloy drawn wire - Part 3: Tolerances on dimensions |
|
DIN EN 13147 |
Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; English version of DIN EN 13147 |
|
DIN EN 13148 |
Copper and copper alloys - Hot-dip tinned strip; English version of DIN EN 13148 |
|
DIN EN 13173 |
Cathodic protection for steel offshore floating structures; English version of DIN EN 13173 |
|
DIN EN 13174 |
Cathodic protection for harbour installations; English version of DIN EN 13174 |
|
DIN EN 13195-1 |
Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications |
|
DIN EN 13283 |
Zinc and zinc alloys - Secondary zinc |
|
DIN EN 13347 |
Copper and copper alloys - Rod and wire for welding and braze welding |
|
DIN EN 13411-4 |
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
|
DIN EN 13509 |
Cathodic protection measurement techniques |