|
DIN EN 13600 |
Copper and copper alloys - Seamless copper tubes for electrical purposes |
|
DIN EN 13602 |
Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
|
DIN EN 13603 |
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
|
DIN EN 13604 |
Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
|
DIN EN 13605 |
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
|
DIN EN 13605 Berichtigung 1 |
Corrigenda to DIN EN 13605:2002-10 |
|
DIN EN 13615 |
Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; English version of DIN EN 13615 |
|
DIN EN 13636 |
Cathodic protection of buried metallic tanks and related piping |
|
DIN EN 13658-2 |
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
|
DIN EN 13675 |
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
|
DIN EN 13835 |
Founding - Austenitic cast irons |
|
DIN EN 13858 |
Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
|
DIN EN 1386 |
Aluminium and aluminium alloys - Tread plate - Specifications; German version EN 1386:1996 |
|
DIN EN 13920-1 |
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
|
DIN EN 13920-10 |
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans |
|
DIN EN 13920-11 |
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators |
|
DIN EN 13920-12 |
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
|
DIN EN 13920-13 |
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
|
DIN EN 13920-15 |
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
|
DIN EN 13920-16 |
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
|
DIN EN 13920-3 |
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
|
DIN EN 13920-4 |
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
|
DIN EN 13920-5 |
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
|
DIN EN 13920-7 |
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
|
DIN EN 13920-9 |
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
|
DIN EN 13957 |
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
|
DIN EN 13958 |
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
|
DIN EN 1396 |
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
|
DIN EN 13981-1 |
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products |
|
DIN EN 13981-2 |
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
|
DIN EN 13981-3 |
Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings |
|
DIN EN 13981-4 |
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
|
DIN EN 1412 |
Copper and copper alloys - European numbering system |
|
DIN EN 14121 |
Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
|
DIN EN 14195 |
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods |
|
DIN EN 14242 |
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
|
DIN EN 14286 |
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
|
DIN EN 14287 |
Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
|
DIN EN 14290 |
Zinc and zinc alloys - Secondary raw materials |
|
DIN EN 14361 |
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
|
DIN EN 14436 |
Copper and copper alloys - Electrolytically tinned strip |
|
DIN EN 14505 |
Cathodic protection of complex structures |
|
DIN EN 14584 |
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
|
DIN EN 14726 |
Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
|
DIN EN 14782 |
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
|
DIN EN 14783 |
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
|
DIN EN 14868 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
|
DIN EN 14935 |
Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
|
DIN EN 14936-1 |
Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
|
DIN EN 14936-2 |
Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
|
DIN EN 14937-1 |
Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
|
DIN EN 14937-2 |
Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
|
DIN EN 14939 |
Copper and copper alloys - Determination of beryllium content - FAAS method |
|
DIN EN 14940-2 |
Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
|
DIN EN 14941 |
Copper and copper alloys - Determination of cobalt content - FAAS method |
|
DIN EN 14942-2 |
Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
|
DIN EN 14977 |
Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
|
DIN EN 15022-3 |
Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
|
DIN EN 15024-2 |
Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS) |
|
DIN EN 1503-1 |
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European standards; English version of DIN EN 1503-1 |
|
DIN EN 1503-2 |
Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified; English version of DIN EN 1503-2 |
|
DIN EN 1503-3 |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; English version of DIN EN 1503-3 + AC:2001 |
|
DIN EN 1503-4 |
Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
|
DIN EN 15063-1 |
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method |
|
DIN EN 15063-2 |
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method |
|
DIN EN 15088 |
Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
|
DIN EN 15112 |
External cathodic protection of well casings |
|
DIN EN 15205 |
Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis |
|
DIN EN 15257 |
Cathodic protection - Competence levels and certification of cathodic protection personnel |
|
DIN EN 1560 |
Founding - Designation system for cast iron - Material symbols and material numbers |
|
DIN EN 1564 |
Founding - Austempered ductile cast irons |
|
DIN EN 1564 |
Founding - Austempered ductile cast irons |
|
DIN EN 1592-1 |
HF seam welded aluminium and aluminium alloy tubes - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 1592-2 |
HF seam welded aluminium and aluminium alloy tubes - Part 2: Mechanical properties |
|
DIN EN 1592-3 |
HF seam welded aluminium and aluminium alloy tubes - Part 3: Tolerances on dimensions and form for circular tubes |
|
DIN EN 1652 |
Copper and copper alloys - Plate, sheet, strip and circles for general purposes |
|
DIN EN 1653 |
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes Amendment A1:2000); English version of DIN EN 1653:1997 + A1:2000 |
|
DIN EN 1655 |
Copper and copper alloys - Declarations of conformity |
|
DIN EN 1669 |
Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
|
DIN EN 1715-1 |
Aluminium and aluminium alloy drawing stock - Part 1: General requirements and technical conditions for inspection and delivery |
|
DIN EN 1715-2 |
Aluminium and aluminium alloy drawing stock - Part 2: Specific requirements for electrotechnical applications |
|
DIN EN 1715-3 |
Aluminium and aluminium alloy drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
|
DIN EN 1715-4 |
Aluminium and aluminium alloy drawing stock - Part 4: Specific requirements for welding applications |
|
DIN EN 1753 |
Magnesium alloy ingots and castings |
|
DIN EN 1754 |
Magnesium and magnesium alloy anodes, ingots and castings - Designation system |
|
DIN EN 1758 |
Copper and copper alloys - Strip for lead frames |
|
DIN EN 1774 |
Zinc alloys for foundry purposes as ingots or in liquid form |
|
DIN EN 1780-1 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
|
DIN EN 1780-3 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
|
DIN EN 1965-1 |
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate; English version of DIN EN 1965-1 |
|
DIN EN 1965-2 |
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate; English version of DIN EN 1965-2 |
|
DIN EN 1971 |
Copper and copper alloys - Eddy current test for tubes |
|
DIN EN 1976 |
Copper and copper alloys - Cast unwrought copper products |
|
DIN EN 1977 |
Copper and copper alloys - Copper drawing stock (wire rod) |
|
DIN EN 1978 |
Copper and copper alloys - Copper cathodes |
|
DIN EN 1981 |
Copper and copper alloys - Master alloys |
|
DIN EN 1982 |
Copper and copper alloys - Ingots and castings |
|
DIN EN 24159 |
Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989 |
|
DIN EN 24829-1 |
Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,05 and 1,0 % (ISO 4829-1:1986); german version EN 24829-1:1990 |
|
DIN EN 24829-2 |
Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,01 and 0,05 % (ISO 4829-2:1988); german version EN 24829-2:1990 |
|
DIN EN 24935 |
Determination of sulfur content of steel and iron by infrared absorption spectroscopy after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991 |
|
DIN EN 24937 |
Determination of chromium content of steel and iron by potentiometric or visual method (ISO 4937:1986); german version EN 24937:1990 |
|
DIN EN 24938 |
Determination of nickel content of steel and iron by gravimetry or volumetric analysis (ISO 4938:1988); german version EN 24938:1990 |
|
DIN EN 24943 |
Determination of copper content of steel and cast iron by flame atomic absorption spectrometry (ISO 4943:1985); german version EN 24943:1990 |
|
DIN EN 24946 |
Determination of copper content of steel and cast iron by the 2,2'-diquinolyl spectrophotometric method (ISO 4946:1984); german version EN 24946:1990 |
|
DIN EN 24947 |
Determination of vanadium content of steel and cast iron by potentiometric titration (ISO 4947:1986); german version EN 24947:1991 |
|
DIN EN 26352 |
Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985); german version EN 26352:1991 |
|
DIN EN 26501 |
Ferronickel; specification and delivery requirements (ISO 6501:1988); german version EN 26501:1992 |
|
DIN EN 27520 |
Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991 |
|
DIN EN 27526 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991 |
|
DIN EN 27527 |
Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991 |
|
DIN EN 28049 |
Ferronickel shot; sampling for analysis (ISO 8049:1988); german version EN 28049:1992 |
|
DIN EN 28050 |
Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988); german version EN 28050:1992 |
|
DIN EN 28343 |
Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985); german version EN 28343:1991 |
|
DIN EN 29658 |
Determination of aluminium content of steel by flame atomic absorption spectrometry (ISO 9658:1990); german version EN 29658:1991 |
|
DIN EN 39 |
Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions; English version of DIN EN 39 |
|
DIN EN 40-5 |
Lighting columns - Part 5: Requirements for steel lighting columns |
|
DIN EN 40-6 |
Lighting columns - Part 6: Requirements for aluminium lighting columns |
|
DIN EN 444 |
Non-destructive testing - General principles for the radiographic examination of metallic materials using X-rays and gamma-rays |
|
DIN EN 486 |
Aluminium and aluminium alloy extrusion ingots; specifications |
|
DIN EN 487 |
Aluminium and aluminium alloy rolling ingots; specifications |
|
DIN EN 504 |
Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet |
|
DIN EN 505 |
Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
|
DIN EN 507 |
Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
|
DIN EN 515 |
Aluminium and aluminium alloys; wrought products; temper designations; German version EN 515:1993 |
|
DIN EN 523 |
Steel strip sheaths for prestressing tendons - Terminology, requirements and conformity |
|
DIN EN 524-1 |
Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions |
|
DIN EN 524-2 |
Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour |
|
DIN EN 524-3 |
Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test |
|
DIN EN 524-4 |
Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance |
|
DIN EN 524-5 |
Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance |
|
DIN EN 524-6 |
Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss) |
|
DIN EN 541 |
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
|
DIN EN 546-1 |
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 546-2 |
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
|
DIN EN 546-3 |
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
|
DIN EN 546-4 |
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
|
DIN EN 570 |
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
|
DIN EN 577 |
Aluminium and aluminium alloy liquid metal - Specifications |
|
DIN EN 586-1 |
Aluminium and aluminium alloy forgings - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 586-3 |
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; English version of DIN EN 586-3 |
|
DIN EN 601 |
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
|
DIN EN 602 |
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
|
DIN EN 603-1 |
Aluminium and aluminium alloy wrought forging stock - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 603-2 |
Aluminium and aluminium alloy wrought forging stock - Part 2: Mechanical properties |
|
DIN EN 604-1 |
Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 604-1:1997 |
|
DIN EN 604-2 |
Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997 |
|
DIN EN 610 |
Ingot tin |
|
DIN EN 611-1 |
Pewter and pewterware - Pewter |
|
DIN EN 611-2 |
Pewter and pewterware - Pewterware |
|
DIN EN 683-1 |
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
|
DIN EN 683-2 |
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
|
DIN EN 683-3 |
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form |
|
DIN EN 723 |
Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
|
DIN EN 754-8 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
|
DIN EN 755-6 |
Aluminium and aluminium alloy extruded rod/bar, tube and profiles - Hexagonal bars: tolerances on dimensions and form |
|
DIN EN 755-8 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
|
DIN EN 755-9 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; English version of DIN EN 755-9 |
|
DIN EN 851 |
Aluminium and aluminium alloy circle and circle stock for the production of culinary utensils - Specifications |
|
DIN EN 941 |
Aluminium and aluminium alloy circle and circle stock for general applications - Specifications |
|
DIN EN ISO 10062 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gases (ISO 10062:1991) |
|
DIN EN ISO 10280 |
Steel and iron - Determination of titanium content by the diantipyrylmethane spectrophotometric method (ISO 10280:1991) |
|
DIN EN ISO 10700 |
Steel and iron - Determination of manganese content by the flame atomic absorption spectrometric method (ISO 10700:1994) |
|
DIN EN ISO 10714 |
Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method (ISO 10714:1992) |
|
DIN EN ISO 11130 |
Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999) |
|
DIN EN ISO 11306 |
Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998) |
|
DIN EN ISO 12737 |
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005) |
|
DIN EN ISO 13900 |
Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
|
DIN EN ISO 13944 |
Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method (ISO 13944:1996) |
|
DIN EN ISO 14556 |
Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000 + Amd.1:2006) |
|
DIN EN ISO 14577-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002) |
|
DIN EN ISO 14577-2 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002) |
|
DIN EN ISO 14577-3 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002) |
|
DIN EN ISO 15156-1 |
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001 |
|
DIN EN ISO 15156-1 Berichtigung 1 |
Petroleum and natural gas industries - Material for use in H2S containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001, Corrigenda to DIN EN ISO 15156-1:2003-05; German and English version EN ISO 15156-1:2001/AC:2006 |
|
DIN EN ISO 15156-2 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003 |
|
DIN EN ISO 15156-2 Berichtigung 1 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003, Corrigenda to DIN EN ISO 15156-2:2005-07; English version EN ISO 15156-2:2003/AC:2006 |
|
DIN EN ISO 15156-3 Berichtigung 1 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003, Corrigenda to DIN EN ISO 15156-3:2005-07; English version EN ISO 15156-3:2003/AC:2006 |
|
DIN EN ISO 15349-2 |
Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
|
DIN EN ISO 15546 |
(DRAFT) Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO/FDIS 15546:2006); English version prEN ISO 15546:2006 |
|
DIN EN ISO 15546 |
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002); English version EN ISO 15546:2002 |
|
DIN EN ISO 196 |
Wrought copper and copper alloys - Detection of residual stress by the mercury(I) nitrate test (ISO 196:1978) |
|
DIN EN ISO 2566-2 |
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
|
DIN EN ISO 2624 |
Copper and copper alloys - Determination of average grain size (ISO 2624:1990) |
|
DIN EN ISO 2626 |
Hydrogen embrittlement test on copper - Determination of average grain size (ISO 2626:1973) |
|
DIN EN ISO 2738 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); English version of DIN EN ISO 2738 |
|
DIN EN ISO 3252 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
|
DIN EN ISO 3325 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002) |
|
DIN EN ISO 3651-1 |
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998) |
|
DIN EN ISO 3651-2 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998) |
|
DIN EN ISO 3738-2 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988) |
|
DIN EN ISO 376 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2004) |
|
DIN EN ISO 3785 |
Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006) |
|
DIN EN ISO 3815-1 |
Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005) |
|
DIN EN ISO 3815-2 |
Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005) |
|
DIN EN ISO 3887 |
Steels - Determination of depth of decarburization (ISO 3887:2003) |
|
DIN EN ISO 3927 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001) |
|
DIN EN ISO 3928 |
Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999) |
|
DIN EN ISO 4022 |
Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987) |
|
DIN EN ISO 4490 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001) |
|
DIN EN ISO 4491-3 |
Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997) |
|
DIN EN ISO 4545-1 |
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005) |
|
DIN EN ISO 4545-2 |
Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005) |
|
DIN EN ISO 4545-3 |
Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2005) |
|
DIN EN ISO 4545-4 |
Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005) |
|
DIN EN ISO 4934 |
Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
|
DIN EN ISO 6506-2 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005) |
|
DIN EN ISO 6506-3 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005) |
|
DIN EN ISO 6509 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
|
DIN EN ISO 7384 |
Corrosion tests in artificial atmosphere - General requirements (ISO 7384:1986) |
|
DIN EN ISO 7441 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984) |
|
DIN EN ISO 7500-2 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006) |
|
DIN EN ISO 7539-2 |
Stress corrosion testing - Preparation and use of bent beam specimens (ISO 7539-2:1989) |
|
DIN EN ISO 7539-3 |
Stress corrosion testing - Preparation and use of U-bend specimens (ISO 7539-3:1989) |
|
DIN EN ISO 7539-4 |
Stress corrosion testing - Preparation and use of uniaxially loaded tensile specimens (ISO 7539-4:1989) |
|
DIN EN ISO 7539-5 |
Stress corrosion testing - Preparation and use of C-ring specimens (ISO 7539-5:1989) |
|
DIN EN ISO 7539-6 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under contstant load or constant displacement (ISO 7539-6:2003) |
|
DIN EN ISO 7539-7 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing (ISO 7539-7:2005) |
|
DIN EN ISO 7799 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); English version of DIN EN ISO 7799 |
|
DIN EN ISO 8044 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999 |
|
DIN EN ISO 8491 |
Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) |
|
DIN EN ISO 8492 |
Metallic materials - Tube - Flattening test (ISO 8492:1998) |
|
DIN EN ISO 8495 |
Metallic materials - Tube - Ring-expanding test (ISO 8495:1998) |
|
DIN EN ISO 8496 |
Metallic materials - Tube - Ring tensile test (ISO 8496:1998) |
|
DIN EN ISO 8565 |
Atmospheric corrosion testing of metals and alloys - General requirements for field tests (ISO 8565:1992) |
|
DIN EN ISO 9400 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990) |
|
DIN EN ISO 9556 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989) |
|
DIN ISO 10076 |
Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991) |
|
DIN ISO 14168 |
Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders (ISO 14168:2003) |
|
DIN ISO 14315 |
Industrial wire screens - Technical requirements and testing (ISO 14315:1997) |
|
DIN ISO 4491-2 |
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997) |
|
DIN ISO 5832-1 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997) |
|
DIN ISO 5832-11 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy (ISO 5832-11:1994) |
|
DIN ISO 5832-2 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999) |
|
DIN ISO 5832-3 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996) |
|
DIN ISO 5832-4 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996) |
|
DIN ISO 5832-6 |
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997) |
|
DIN ISO 5832-7 |
Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994) |
|
DIN ISO 5832-8 |
Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997) |
|
DIN ISO 5832-9 |
Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992) |
|
DIN V 17912 |
Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials (identical to CEN/CR 12776) |