|
DIN EN 12084 |
Non-destructive testing - Eddy current testing - General principles and basic guidelines; English version of DIN EN 12084 |
|
DIN EN 12096 |
Mechanical vibration - Declaration and verification of vibration emission values |
|
DIN EN 12178 |
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
|
DIN EN 12186 |
Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements |
|
DIN EN 12198-2 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
|
DIN EN 12223 |
Non-destructive testing - Ultrasonic examination - Specification for calibration block No 1 |
|
DIN EN 12263 |
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
|
DIN EN 12309-1 |
Gas-fired absorption and adsorption air conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety |
|
DIN EN 12309-2 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy; English version of DIN EN 12309-2 |
|
DIN EN 12470-1 |
Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; English version of DIN EN 12470-1 |
|
DIN EN 12470-2 |
Clinical thermometers - Part 2: Phase change-type (dot matrix) thermometers; English version of DIN EN 12470-2 |
|
DIN EN 12470-3 |
Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device; English version of DIN EN 12470-3 |
|
DIN EN 12470-4 |
Clinical thermometers - Part 4: Performance of electrical thermometers for continous measurement; English version of DIN EN 12470-4 |
|
DIN EN 12514-1 |
Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; Parts, oil feed pumps, control and safety devices, supply tanks; English version of DIN EN 12514-1 |
|
DIN EN 12514-2 |
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves pipes, filters, oil de-aerators, meters; English version of DIN EN 12514-2 |
|
DIN EN 12543-1 |
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method |
|
DIN EN 12543-2 |
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method |
|
DIN EN 12543-3 |
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method |
|
DIN EN 12543-5 |
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes |
|
DIN EN 12544-1 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method |
|
DIN EN 12544-2 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; English version of DIN EN 12544-2 |
|
DIN EN 12544-3 |
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method |
|
DIN EN 12545 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; English version of DIN EN 12545 |
|
DIN EN 12549 |
Acoustics - Noise test code for fastener driving tools - Engineering method |
|
DIN EN 12601 |
Reciprocating internal combustion engine driven generating sets - Safety; English version of DIN EN 12601 |
|
DIN EN 12639 |
Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy; English version of DIN EN 12639 |
|
DIN EN 1265 |
Noise test code for fondry machines and equipment; English version of DIN EN 1265 |
|
DIN EN 12668-1 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; English version of DIN EN 12668-1 |
|
DIN EN 12668-1/A1 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
|
DIN EN 12668-2 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes; English version of DIN EN 12668-2 |
|
DIN EN 12668-2/A1 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
|
DIN EN 12668-3/A1 |
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
|
DIN EN 12736 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
|
DIN EN 12786 |
Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards |
|
DIN EN 12830 |
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
|
DIN EN 12900 |
Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data |
|
DIN EN 12952 Beiblatt 1 |
Water-tube boilers and auxiliary installations - Part 17: Guidelines for the involvement of an inspection body independent of the manufacturer |
|
DIN EN 12952-1 |
Water-tube boilers and auxiliary installations - Part 1: General; Eanglish version of DIN EN 12952-1 |
|
DIN EN 12952-10 |
Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure |
|
DIN EN 12952-13 |
Water-tube boilers and auxiliary installations - Part 13: Requirements for flue gas cleaning systems |
|
DIN EN 12952-14 |
Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
|
DIN EN 12952-15 |
Water tube boilers and auxiliary installations - Part 15: Acceptance tests |
|
DIN EN 12952-16 |
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
|
DIN EN 12952-2 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; English version of DIN EN 12952-2 |
|
DIN EN 12952-3 |
Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts; English version of DIN EN 12952-3 |
|
DIN EN 12952-4 |
Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations; English version of DIN EN 12952-4 |
|
DIN EN 12952-5 |
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
DIN EN 12952-6 |
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler |
|
DIN EN 12952-8 |
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler |
|
DIN EN 12952-9 |
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
|
DIN EN 12953 Beiblatt 1 |
Shell boilers - Part 14: Guideline for the involvement of an inspection body independent of the manufacturer |
|
DIN EN 12953-1 |
Shell boilers - Part 1: General |
|
DIN EN 12953-10 |
Shell boilers - Part 10: Requirements for boiler feedwater and boiler water quality |
|
DIN EN 12953-11 |
Shell boilers - Part 11: Acceptance tests |
|
DIN EN 12953-12 |
Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler |
|
DIN EN 12953-2 |
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
|
DIN EN 12953-3 |
Shell boilers - Part 3: Design and calculation for pressure parts |
|
DIN EN 12953-5 |
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
|
DIN EN 12953-6 |
Shell boilers - Part 6: Requirements for equipment for the boiler |
|
DIN EN 12953-7 |
Shell boilers - Part 7: Requirements for firing systems for liquid and gaseous fuels for the boiler |
|
DIN EN 12953-8 |
Shell boilers - Part 8: Requirements for safeguards against excessive pressure; English version of DIN EN 12953-8 |
|
DIN EN 12975-1 |
Thermal solar systems and components - Solar collectors - Part 1: General requirements |
|
DIN EN 12975-2 |
Thermal solar systems and components - Solar collectors - Part 2: Test methods |
|
DIN EN 12976-1 |
Thermal solar systems and components - Factory made systems - Part 1: General requirements |
|
DIN EN 12976-2 |
Thermal solar systems and components - Factory made systems - Part 2: Test methods |
|
DIN EN 1299 |
Vibration isolation of machinery - Information for the application of source isolation |
|
DIN EN 13018 |
Non-destructive testing - Visual testing - General principles; English version of DIN EN 13018 |
|
DIN EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
|
DIN EN 13032-1 |
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
|
DIN EN 13032-2 |
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places |
|
DIN EN 13068-1 |
Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties; Englis version DIN EN 13068-1 |
|
DIN EN 13068-2 |
Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; English version DIN EN 13068-2 |
|
DIN EN 13068-3 |
Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; English version of DIN EN 13068-3 |
|
DIN EN 13136 |
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
|
DIN EN 13146-6 |
Railway applications - Track; Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
|
DIN EN 13185 |
Non-destructive testing - Leak testing - Tracer gas method; English version of DIN EN 13185 |
|
DIN EN 13190 |
Dial thermometers; English version of DIN EN 13190 |
|
DIN EN 13192 |
Non-destructive testing - Leak testing - Calibration of reference leaks for gases; English version of DIN EN 13192 |
|
DIN EN 13215 |
Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data; English version of DIN EN 13215 |
|
DIN EN 13220 |
Flow-metering devices for connection to terminal units of medical gas pipeline systems |
|
DIN EN 1330-1 |
Non-destructive testing - Terminology - Part 1: List of general terms; Trilingual version EN 1330-1:1998 |
|
DIN EN 1330-10 |
Non-destructive testing - Terminology - Part 10: Terms used in visual testing; Trilingual version EN 1330-10:2003 |
|
DIN EN 1330-2 |
Non-destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods; Trilingual version EN 1330-2:1998 |
|
DIN EN 1330-3 |
Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing; Trilingual version EN 1330-3:1997 |
|
DIN EN 1330-4 |
Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing; Trilingual version EN 1330-4:2000 |
|
DIN EN 1330-5 |
Non-destructive testing - Terminology - Part 5: Terms used in Eddy Current testing; trilingual version EN 1330-5:1998 |
|
DIN EN 1330-7 |
Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing; Trilingual version EN 1330-7:2005 |
|
DIN EN 1330-8 |
Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing; Trilingual version EN 1330-8:1998 |
|
DIN EN 13313 |
Refrigerating systems and heat pumps - Competence of personnel; English version of DIN EN 13313 |
|
DIN EN 13363-1 |
Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method |
|
DIN EN 13363-2 |
Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method |
|
DIN EN 13477-1 |
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 1: Equipment description; English version of DIN EN 13477-1 |
|
DIN EN 13477-2 |
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics; English version of DIN EN 13477-2 |
|
DIN EN 13485 |
Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; English version of DIN EN 13485 |
|
DIN EN 13486 |
Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; English version of DIN EN 13486 |
|
DIN EN 13487 |
Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement |
|
DIN EN 13523-1 |
Coil coated metals - Test methods - Part 1: Coating thickness; English version of DIN EN 13523-1 |
|
DIN EN 13554 |
Non-destructive testing - Acoustic emission - General principles |
|
DIN EN 13625 |
Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; English version of DIN EN 13625 |
|
DIN EN 13741 |
Thermal performance acceptance testing of mechanical draught series wet cooling towers |
|
DIN EN 13771-1 |
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
|
DIN EN 13860-1 |
Non-destructive testing - Eddy current examination; Equipment characteristics and verification - Part 1: Instrument characteristics and verification |
|
DIN EN 13860-2 |
Non-destructive testing - Eddy current examination; Equipment characteristics and verification - Part 2: Probe characteristics and verification |
|
DIN EN 13860-3 |
Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification |
|
DIN EN 13925-1 |
Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles |
|
DIN EN 13925-2 |
Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 2: Procedures |
|
DIN EN 13925-3 |
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments |
|
DIN EN 13927 |
Non-destructive testing - Visual testing - Equipment |
|
DIN EN 1397 |
Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance |
|
DIN EN 14096-1 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
|
DIN EN 14096-2 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements |
|
DIN EN 14127 |
Non-destructive testing - Ultrasonic thickness measurement |
|
DIN EN 14222 |
Stainless steel shell boilers |
|
DIN EN 14255-1 |
Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
|
DIN EN 14255-2 |
Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace |
|
DIN EN 14255-4 |
Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements |
|
DIN EN 14276-1 |
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
|
DIN EN 1434-3 |
(DRAFT) Heat meters - Part 3: Data exchange and interfaces; English version prEN 1434-3:2007 |
|
DIN EN 14366 |
Laboratory measurement of noise from waste water installations |
|
DIN EN 14462 |
Surface treatment equipment - Noise test code for surface treatment equipment including its ancilliary handling equipment - Accuracy grades 2 and 3 |
|
DIN EN 14571 |
Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method |
|
DIN EN 14584 |
Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
|
DIN EN 14597 |
Temperature control devices and temperature limiters for heat generating systems |
|
DIN EN 14705 |
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
|
DIN EN 14784-1 |
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems |
|
DIN EN 14784-2 |
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays |
|
DIN EN 14866 |
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
|
DIN EN 15036-1 |
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators |
|
DIN EN 15036-2 |
200 |
|
DIN EN 15042-1 |
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves |
|
DIN EN 15042-2 |
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method |
|
DIN EN 1518 |
Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors |
|
DIN EN 15218 |
Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements |
|
DIN EN 1547 |
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; English version of DIN EN 1547 |
|
DIN EN 1557 |
Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996 |
|
DIN EN 1593 |
Non-destructive testing - Bubble emission techniques |
|
DIN EN 1736 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; English version of DIN EN 1736 |
|
DIN EN 1779 |
Non-destructive testing - Leak testing - Criteria for method and technique selection |
|
DIN EN 1793-1 |
Road traffic noise devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
|
DIN EN 1793-2 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
|
DIN EN 1793-3 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
|
DIN EN 1834-1 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres; English version of DIN EN 1834-1 |
|
DIN EN 1834-2 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust; English version of DIN EN 1834-2 |
|
DIN EN 1834-3 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres; English version of DIN EN 1834-3 |
|
DIN EN 1861 |
Refrigerating systems and heat pumps - System flow diagrams and piping instrument diagrams - Layout and symbols |
|
DIN EN 1915-3 |
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
|
DIN EN 1915-4 |
Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
|
DIN EN 21683 |
Preferred reference quantities for acoustic levels (ISO 1683:1983) |
|
DIN EN 230 |
Automatic burner control systems for oil burners |
|
DIN EN 24185 |
Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993 |
|
DIN EN 247 |
Heat exchangers - Terminology |
|
DIN EN 255-3 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (including Corrigendum AC:1997) |
|
DIN EN 25580 |
Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992 |
|
DIN EN 257 |
Mechanical thermostats for gas-burning appliances |
|
DIN EN 264 |
Safety shut-off devices for combustion plants using liquid fuels; safety requirements and testing; german version EN 264:1991 |
|
DIN EN 267 |
Forced draught oil burners - Definitions, requirements, testing, marking |
|
DIN EN 27574-1 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions; (Identical with ISO 7574-1:1985) German version EN 27574-1:1988 |
|
DIN EN 27574-2 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines; (Identical with ISO 7574-2:1985) German version EN 27574-2:1988 |
|
DIN EN 27574-3 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines; (Identical with ISO 7574-3:1985) German version EN 27574-3:1988 |
|
DIN EN 27574-4 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines; (Identical with ISO 7574-4:1985) German version EN 27574-4:1988 |
|
DIN EN 28960 |
Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991); German version EN 28960:1993 |
|
DIN EN 29104 |
Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993 |
|
DIN EN 29295 |
Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989); german version EN 29295:1991 |
|
DIN EN 293 |
Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992 |
|
DIN EN 298 |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
|
DIN EN 299 |
Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
|
DIN EN 30326-1 |
Laboratory method for evaluating vehicle seat vibration - Basic requirements (ISO 10326-1:1992) |
|
DIN EN 305 |
Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
|
DIN EN 306 |
Heat exchangers - Methods of measuring the parameters necessary for establishing the performance |
|
DIN EN 307 |
Heat exchangers - Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchangers |
|
DIN EN 308 |
Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices; German version EN 308:1997 |
|
DIN EN 327 |
Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance (includes amendment A1:2002) |
|
DIN EN 328 |
Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration (includes amendment A1:2002) |
|
DIN EN 378-1 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; English version of DIN EN 378-1 |
|
DIN EN 378-3 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; English version of DIN EN 378-3 |
|
DIN EN 378-4 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery; English version of DIN EN 378-4 |
|
DIN EN 45510-1 |
Guide for procurement of power station equipment - Part 1: Common clauses |
|
DIN EN 45510-2-2 |
Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies |
|
DIN EN 45510-2-3 |
Guide for procurement of power station equipment - Part 2-3: Electrical equipment; Stationary batteries and chargers; English version of DIN EN 45510-2-3 |
|
DIN EN 45510-2-4 |
Guide for procurement of power station equipment - Part 2-4: Electrical equipmen; High power static convertors; English version of DIN EN 45510-2-4 |
|
DIN EN 45510-2-6 |
Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; English version of DIN EN 45510-2-6 |
|
DIN EN 45510-2-7 |
Guide for procurement of power station equipment - Part 2-7: Electrical equipment; Switchgear and controlgear |
|
DIN EN 45510-3-1 |
Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers |
|
DIN EN 45510-3-2 |
Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers |
|
DIN EN 45510-3-3 |
Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing |
|
DIN EN 45510-4-1 |
Guide to procurement of power station equipment - Part 4-1: Boiler auxiliaries - Equipment for reduction of dust emissions |
|
DIN EN 45510-4-10 |
Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant |
|
DIN EN 45510-4-2 |
Guide to procurement of power station equipment - Part 4-2: Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters |
|
DIN EN 45510-4-4 |
Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment |
|
DIN EN 45510-4-5 |
Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant |
|
DIN EN 45510-4-6 |
Guide to procurement of power station equipment - Part 4-6: Boiler auxiliaries - Flue gas desulphurization (DeSOx) plant |
|
DIN EN 45510-4-7 |
Guide to procurement of power station equipment - Part 4-7: Boiler auxiliaries - Ash handling plant |
|
DIN EN 45510-4-8 |
Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant |
|
DIN EN 45510-4-9 |
Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers |
|
DIN EN 45510-5-1 |
Guide for procurement of power station equipment - Part 5-1: Steam turbines; German version EN 45510-5-1:1998 |
|
DIN EN 45510-5-2 |
Guide for procurement of power station equipment - Part 5-2: Gas turbines; German version EN 45510-5-2:1998 |
|
DIN EN 45510-5-3 |
Guide for procurement of power station equipment - Part 5-3: Wind turbines |
|
DIN EN 45510-5-4 |
Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump turbines |
|
DIN EN 45510-6-1 |
Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
|
DIN EN 45510-6-3 |
Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
|
DIN EN 45510-6-4 |
Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps; English version of DIN EN 45510-6-4 |
|
DIN EN 45510-6-5 |
Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems; English version of DIN EN 45510-6-5 |
|
DIN EN 45510-6-6 |
Guide for procurement of power station equipment - Part 6-6 Turbine auxiliaries - Wet and wet/dry cooling towers; English version of DIN EN 45510-6-6 |
|
DIN EN 45510-6-7 |
Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
|
DIN EN 45510-6-8 |
Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes; Englisch version DIN EN 45510-6-8 |
|
DIN EN 45510-6-9 |
Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems; Englisch version DIN EN 45510-6-9 |
|
DIN EN 45510-7-1 |
Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems; English version DIN EN 45510-7-1 |
|
DIN EN 45510-7-2 |
Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves; English version of DIN EN 45510-7-2 |
|
DIN EN 45510-8-1 |
Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
|
DIN EN 462-1 |
Non-destructive testing; image quality of radiographs; image quality indicators (wire type) and determination of image quality value |
|
DIN EN 462-2 |
Non-destructive testing - Image quality of radiographs - Image quality indicators (step/hole type) - Determination of image quality value |
|
DIN EN 462-3 |
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals |
|
DIN EN 462-4 |
Non-destructive testing - Image quality of radiographs - Experimental evaluation of image quality values and image quality tables |
|
DIN EN 462-5 |
Non-destructive testing - Image quality of radiographs - Image quality indicators (duplex wire type): Determination of image unsharpness value |
|
DIN EN 472 |
Pressure gauges - Vocabulary |
|
DIN EN 50279 |
(DRAFT) Visual display units - Measuring methods for low frequency electric and magnetic fields; German version prEN 50279:1997 |
|
DIN EN 521 |
Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
|
DIN EN 562 |
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
|
DIN EN 571-1 |
Non-destructive testing - Penetrant testing - Part 1: General principles |
|
DIN EN 583-1 |
Non-destructive testing - Ultrasonic examination - Part 1: General principles |
|
DIN EN 583-3 |
Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique |
|
DIN EN 583-4 |
Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface |
|
DIN EN 583-5 |
Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities; English version of DIN EN 583-5 |
|
DIN EN 584-1 |
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography |
|
DIN EN 584-2 |
Non-destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values |
|
DIN EN 60565 |
(DRAFT) Underwater acoustics - Hydrophones - Calibration in the frequency range 0.01 Hz to 1 MHz (IEC 87/274/CDV:2004); German version prEN 60565:2004 |
|
DIN EN 61161 |
(DRAFT) Ultrasonics - Power measurement - Radiation force balances and performance requirements up to 1 W in the frequency range 0,5 MHz to 25 MHz and up to 20 W in the frequency range 0,75 MHz to 5 MHz (IEC 87/325/CDV:2005); German version prEN 61161:2005 |
|
DIN EN 61228 |
(DRAFT) Method of measuring and specifying fluorescent ultraviolet lamps used for tanning (IEC 34A/1177/CDV:2006); German version prEN 61228:2006 |
|
DIN EN 61400-25-1 |
(DRAFT) Wind turbines - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models (IEC 88/238/CDV:2005); German version prEN 61400-25-1:2005, text in English |
|
DIN EN 61400-25-2 |
(DRAFT) Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models (IEC 88/239/CDV:2005); German version prEN 61400-25-2:2005, text in English |
|
DIN EN 61400-25-3 |
(DRAFT) Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models (IEC 88/240/CDV:2005); German version prEN 61400-25-3:2005, text in English |
|
DIN EN 61400-25-3 |
(DRAFT) Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models (IEC 88/240/CDV:2005); German version prEN 61400-25-3:2005, text in English |
|
DIN EN 61400-25-3 |
(DRAFT) Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models (IEC 88/240/CDV:2005); German version prEN 61400-25-3:2005, text in English |
|
DIN EN 61400-25-4 |
(DRAFT) Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to XML based communication profile (IEC 88/241/CDV:2005); German version prEN 61400-25-4:2005, text in English |
|
DIN EN 61400-25-5 |
(DRAFT) Wind turbines - Part 25-5: Communications for monitoring and control of wind power plants - Conformance testing (IEC 88/242/CDV:2005); German version prEN 61400-25-5:2005, text in English |
|
DIN EN 61966-2-4 |
(DRAFT) Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC (IEC 100/967/CDV:2005); German version prEN 61966-2-4:2005 |
|
DIN EN 62127-1 |
(DRAFT) Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz using hydrophones (IEC 87/352/CDV:2006); German version prEN 62127-1:2006 |
|
DIN EN 62127-2 |
(DRAFT) Ultrasonics - Hydrophones - Part 2: Calibration of hydrophones to be used in ultrasonic fields up to 40 MHz (IEC 87/353/CDV:2006); German version prEN 62127-2:2006 |
|
DIN EN 62127-3 |
(DRAFT) Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz (IEC 87/354/CDV:2006); German version prEN 62127-3:2006 |
|
DIN EN 62129 |
(DRAFT) Calibration of optical spectrum analyzers (IEC 86/149/CD:1999); German version prEN 62129:1999 |
|
DIN EN 837-2 |
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997 |
|
DIN EN 837-3 |
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996 |
|
DIN EN ISO 10052 |
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004) |
|
DIN EN ISO 10360-2 |
GPS - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size (ISO 10360-2:2001) |
|
DIN EN ISO 10360-3 |
GPS - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); English version of DIN EN ISO 10360-3 |
|
DIN EN ISO 10360-5 |
GPS - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple stylus probing systems (ISO 10360-5:2000); English version of DIN EN ISO 10360-5 |
|
DIN EN ISO 10360-6 |
GPS - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001) |
|
DIN EN ISO 10437 |
Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003); English version EN ISO 10437:2003 |
|
DIN EN ISO 10534-1 |
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996); English version of DIN EN ISO 10534-1 |
|
DIN EN ISO 105-A06 |
Tests for colour fastness of textiles - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995) |
|
DIN EN ISO 10846-1 |
Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:1997) |
|
DIN EN ISO 10846-2 |
Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Dynamic stiffness of elastic supports for translatory motion - Direct method (ISO 10846-2:1997) |
|
DIN EN ISO 10846-3 |
Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002) |
|
DIN EN ISO 10846-4 |
Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003) |
|
DIN EN ISO 11102-1 |
Handle starting equipment for reciprocating internal combustion engines - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
|
DIN EN ISO 11102-2 |
Handle starting equipment for reciprocating internal combustion engines - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
|
DIN EN ISO 11137-3 |
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006) |
|
DIN EN ISO 1119 |
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998) |
|
DIN EN ISO 11200 |
Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound power levels at a work station and at other specified positions (ISO 11 200:1995) |
|
DIN EN ISO 11201 |
Noise emitted by machinery and equipment - Measurement of emission sound power levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11 201:1995) |
|
DIN EN ISO 11202 |
Noise emitted by machinery and equipment - Measurement of emission sound power levels at a work station and at other specified positions - Survey method in situ (ISO 11 202:1995) |
|
DIN EN ISO 11203 |
Noise emitted by machinery and equipment - Determination of emission sound power levels at a work station and at other specified positions from the sopund power level (ISO 11 203:1995) |
|
DIN EN ISO 11204 |
Noise emitted by machinery and equipment - Determination of emission sound power levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11 204:1995) |
|
DIN EN ISO 11205 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
|
DIN EN ISO 11546-1 |
Determination of sound insulation performance of enclosures - Measurements under laboratory conditions (for declaration purposes) (ISO 11 546-1:1995) |
|
DIN EN ISO 11562 |
GPS - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996); English version of DIN EN ISO 11562 |
|
DIN EN ISO 11688-1 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
DIN EN ISO 11688-2 |
Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); English version of DIN EN ISO 11688-2 |
|
DIN EN ISO 11689 |
Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996 |
|
DIN EN ISO 11690-1 |
Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
|
DIN EN ISO 11690-2 |
Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
|
DIN EN ISO 11690-3 |
Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997) |
|
DIN EN ISO 11820 |
Acoustics - Measurements on silencers in situ (ISO 11820:1996); German version EN ISO 11820:1996 |
|
DIN EN ISO 11821 |
Acoustics - Measurement of the in situ sound attenuation of removable screens (ISO 11821:1996) |
|
DIN EN ISO 11904-1 |
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using microphone in real ear (MIRE-technique) (ISO 11904-1:2002) |
|
DIN EN ISO 11904-2 |
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004) |
|
DIN EN ISO 11957 |
Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
|
DIN EN ISO 12001 |
Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
|
DIN EN ISO 12001 Beiblatt 1 |
(DRAFT) Acoustics - Noise emitted by machinery and equipment - Guideline for the selection of a suitable basic measurement method for the determination of the noise emission of a machine |
|
DIN EN ISO 12085 |
GPS - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
|
DIN EN ISO 12179 |
GPS - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); English version of DIN EN ISO 12179 |
|
DIN EN ISO 12241 |
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998); German version EN ISO 12241:1998 |
|
DIN EN ISO 12706 |
Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000); Trilingual version EN ISO 12706:2000 |
|
DIN EN ISO 13473-1 |
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997) |
|
DIN EN ISO 13696 |
Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002) |
|
DIN EN ISO 13706 |
Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2005); English version EN ISO 13706:2005 |
|
DIN EN ISO 14257 |
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); English version of DIN EN ISO 14257 |
|
DIN EN ISO 14314 |
Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
|
DIN EN ISO 14509 |
Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); English version of DIN EN ISO 14509 |
|
DIN EN ISO 14509/A1 |
Small craft - Measurement of airborne sound emitted by powered recreational craft; Amendment 1 (ISO 14509:2000/A1:2004) |
|
DIN EN ISO 14509-2 |
Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft (ISO 14509-2:2006) |
|
DIN EN ISO 14577-2 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002) |
|
DIN EN ISO 1463 |
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
|
DIN EN ISO 14660-2 |
Geometrical product specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999) |
|
DIN EN ISO 14978 |
Geometrical product specifikations (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2006) |
|
DIN EN ISO 15212-1 |
Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998) |
|
DIN EN ISO 15212-2 |
Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002) |
|
DIN EN ISO 15667 |
Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); English version of DIN EN ISO 15667 |
|
DIN EN ISO 15744 |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
|
DIN EN ISO 16032 |
Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |