|
DIN EN ISO 1680 |
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); English version of DIN EN ISO 1680 |
|
DIN EN ISO 16812 |
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007); English version EN ISO 16812:2007 |
|
DIN EN ISO 17201-1 |
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005) |
|
DIN EN ISO 17201-2 |
Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006) |
|
DIN EN ISO 17201-4 |
Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006) |
|
DIN EN ISO 2151 |
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004) |
|
DIN EN ISO 2177 |
Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003) |
|
DIN EN ISO 2178 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness by the magnetic method (ISO 2178:1982) |
|
DIN EN ISO 21968 |
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005) |
|
DIN EN ISO 2360 |
Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003) |
|
DIN EN ISO 2361 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness by the magnetic method (ISO 2361:1982) |
|
DIN EN ISO 2624 |
Copper and copper alloys - Determination of average grain size (ISO 2624:1990) |
|
DIN EN ISO 2692 |
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) |
|
DIN EN ISO 2922 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); English version of DIN EN ISO 2922 |
|
DIN EN ISO 3059 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001); English version of DIN EN ISO 3059 |
|
DIN EN ISO 3095 |
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO 3095:2005) |
|
DIN EN ISO 3381 |
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
|
DIN EN ISO 3452-2 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006) |
|
DIN EN ISO 3452-3 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998) |
|
DIN EN ISO 3452-4 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998) |
|
DIN EN ISO 3497 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); English version of DIN EN ISO 3497 |
|
DIN EN ISO 3543 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); English version of DIN EN ISO 3543 |
|
DIN EN ISO 3740 |
Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); English version of DIN EN ISO 3740 |
|
DIN EN ISO 3741 |
Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); English version of DIN EN ISO 3741 |
|
DIN EN ISO 3743-1 |
Determination of sound power levels of noise sources by engineering methods for small movable sources in reverberant fields - Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
|
DIN EN ISO 3744 |
Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
|
DIN EN ISO 3745 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO 3745:2003) |
|
DIN EN ISO 3746 |
Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping mesurement surface over a reflecting plane (ISO 3746:1995) |
|
DIN EN ISO 3747 |
Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000); English version of DIN EN ISO 3747 |
|
DIN EN ISO 376 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2004) |
|
DIN EN ISO 3822-1 |
Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999) |
|
DIN EN ISO 3822-2 |
Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995) |
|
DIN EN ISO 3822-3 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
|
DIN EN ISO 3822-4 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
|
DIN EN ISO 385 |
Laboratory glassware - Burettes (ISO 385:2005) |
|
DIN EN ISO 3868 |
Metallic and other non-organic coatings - Measurement of coating thickness by the Fizeau multiple-beam interferometric method (ISO 3868:1976) |
|
DIN EN ISO 3882 |
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
|
DIN EN ISO 3977-5 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001) |
|
DIN EN ISO 3977-5 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 |
|
DIN EN ISO 4090 |
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2001) |
|
DIN EN ISO 4288 |
GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
|
DIN EN ISO 4375 |
Hydrometric determinations - Cableway systems for stream gauging (ISO 4375:2000) |
|
DIN EN ISO 4518 |
Metallic coatings - Measurement of coating thickness by the profilometric method (ISO 4518:1980) |
|
DIN EN ISO 4545-2 |
Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2005) |
|
DIN EN ISO 4545-3 |
Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2005) |
|
DIN EN ISO 463 |
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006) |
|
DIN EN ISO 4630-1 |
Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004) |
|
DIN EN ISO 4630-2 |
Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method (ISO 4630-2:2004) |
|
DIN EN ISO 4788 |
Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
|
DIN EN ISO 4871 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); German version EN ISO 4871:1996 |
|
DIN EN ISO 5135 |
Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
|
DIN EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
|
DIN EN ISO 5167-1 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
|
DIN EN ISO 5167-2 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
|
DIN EN ISO 5167-3 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
|
DIN EN ISO 5167-4 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
|
DIN EN ISO 5436-1 |
GPS -Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); English version of DIN EN ISO 5436-1 |
|
DIN EN ISO 5436-2 |
GPS - Surface texture: Profile method - Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001) |
|
DIN EN ISO 6271-1 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004) |
|
DIN EN ISO 6271-2 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004) |
|
DIN EN ISO 6416 |
Hydrometry - Measurement of discharge by the ultrasonic (acoustic) method (ISO 6416:2004) |
|
DIN EN ISO 6506-2 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005) |
|
DIN EN ISO 6506-3 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005) |
|
DIN EN ISO 6817 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters (ISO 6817:1992) |
|
DIN EN ISO 6926 |
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000); English version of DIN EN ISO 6926 |
|
DIN EN ISO 7029 |
Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000); English version of DIN EN ISO 7029 |
|
DIN EN ISO 7235 |
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
|
DIN EN ISO 748 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); English version of DIN EN ISO 748 |
|
DIN EN ISO 7500-2 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006) |
|
DIN EN ISO 772/A2 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 2:2004) |
|
DIN EN ISO 787-25 |
General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993) |
|
DIN EN ISO 8178-2 |
Exhaust emission measurement on reciprocating internal combustion engines - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996) |
|
DIN EN ISO 8178-5 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997) |
|
DIN EN ISO 8316 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1995) |
|
DIN EN ISO 8401 |
Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986) |
|
DIN EN ISO 8497 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
|
DIN EN ISO 8655-1 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002) |
|
DIN EN ISO 8655-2 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) |
|
DIN EN ISO 8655-3 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002) |
|
DIN EN ISO 8655-4 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002) |
|
DIN EN ISO 8655-5 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002) |
|
DIN EN ISO 8655-6 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002) |
|
DIN EN ISO 8655-7 |
Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005) |
|
DIN EN ISO 9220 |
Metallic coatings - Measurement of coating thickness with the scanning electron microscope method (ISO 9220:1988) |
|
DIN EN ISO 9229 |
(DRAFT) Thermal insulation - Definitions of terms (ISO/DIS 9229:1997); Trilingual version prEN ISO 9229:1997 |
|
DIN EN ISO 9300 |
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
|
DIN EN ISO 9488 |
Solar energy - Vocabulary (ISO 9488:1999); Trilingual version EN ISO 9488:1999 |
|
DIN EN ISO 9513 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999) |
|
DIN EN ISO 9614-1 |
Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points (ISO 9614-1:1993) |
|
DIN EN ISO 9614-2 |
Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
|
DIN EN ISO 9614-3 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
|
DIN EN ISO 9831 |
Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998) |
|
DIN EN ISO 9902-1 |
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001); English version of DIN EN ISO 9902-1 |
|
DIN EN ISO 9902-2 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001); English version of DIN EN ISO 9902-2 |
|
DIN EN ISO 9902-3 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001); English version of DIN EN ISO 9902-3 |
|
DIN EN ISO 9902-4 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001); English version of DIN EN ISO 9902-4 |
|
DIN EN ISO 9902-5 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001); English version of DIN EN ISO 9902-5 |
|
DIN EN ISO 9902-6 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machines (ISO 9902-6:2001); English version of DIN EN ISO 9902-6 |
|
DIN EN ISO 9902-7 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001); English version of DIN EN ISO 9902-7 |
|
DIN EN ISO 9934-2 |
Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002) |
|
DIN EN ISO 9934-3 |
Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2002) |
|
DIN EN ISO/IEC 81400-4 |
(DRAFT) Wind turbine generator systems - Part 4: Gearboxes for turbines from 40 kW to 2 MW and larger (IEC 88/220/CDV:2004); German version prEN 81400-4:2004 |
|
DIN ETS 300753 |
Equipment Engineering (EE) - Acoustic noise emitted by telecommunications equipment; English version ETS 300753:1997 |
|
DIN IEC 60050-131/A1 |
(DRAFT) International Electrotechnical Vocabulary - Part 131: Circuit theory (IEC 1/2014/CDV:2006) |
|
DIN IEC 60050-617 |
(DRAFT) International Electrotechnical Vocabulary - Part 617: Organisation/market of electricity (IEC 1/1999/CDV:2006) |
|
DIN IEC 60068-2-20 |
(DRAFT) Basic environmental testing procedures - Part 2: Tests - Test T: Test methods for solderability and resistance to soldering heat of leaded devices (IEC 91/554/CD:2005) |
|
DIN IEC 60068-2-21/A1 |
(DRAFT) Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices (IEC 91/440/CD:2004) |
|
DIN IEC 60068-2-54 |
(DRAFT) Environmental testing - Part 2-54: Tests; Test Ta: Solderability testing of electronic components by the wetting balance method (IEC 91/381/CD:2003) |
|
DIN IEC 60068-2-69 |
(DRAFT) Environmental testing - Part 2: Tests; Test Te: Solderability of electronic components for surface mount technology by the wetting balance method (IEC 91/404/CD:2003) |
|
DIN IEC 60068-2-82 |
(DRAFT) Environmental Testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 91/517/CD:2005) |
|
DIN IEC 60404-4/A2 |
(DRAFT) Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials (IEC 68/339/CD:2007) |
|
DIN IEC 60412 |
(DRAFT) Nuclear instrumentation - Scintillation detectors - Nomenclature (identification) - Standard dimensions of scintillators (IEC 45/615/CDV:2006) |
|
DIN IEC 60556/A2 |
(DRAFT) Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies - Amendment 2 to IEC 60556 (IEC 51/731/CD:2003) |
|
DIN IEC 60640 |
CAMAC-serial highway interface system; identical with IEC 60640, eidtion 1979 (as of 1984) |
|
DIN IEC 60677 |
Block transfers in CAMAC systems; identical with IEC 60677, edition 1980 |
|
DIN IEC 60713 |
Subroutines for CAMAC |
|
DIN IEC 60729 |
Multiple controllers in a CAMAC crate; identical with IEC 60729, edition 1982 |
|
DIN IEC 60775 |
Real-time BASIC for CAMAC; identical with IEC 60775, edition 1983 |
|
DIN IEC 60880 |
Software for computers in the safety systems of nuclear power stations; identical with IEC 60880, edition 1986 |
|
DIN IEC 61098 |
(DRAFT) Radiation protection - Installed personnel surface contamination monitoring assemblies (IEC 45B/281/CD:2000) |
|
DIN IEC 61304 |
Nuclear instrumentation - Liquid-scintillation counting systems - Performance verification (IEC 61304:1994) |
|
DIN IEC 61582-1 |
(DRAFT) Radiation protection - Equipment for in-vivo-monitoring (whole and partial body counters) - Part 1: General requirements and installed systems (IEC 45B/270/CD:2000) |
|
DIN IEC 61582-2 |
(DRAFT) Radiation protection - Equipment for in vivo monitoring (whole and partial body counters) - Part 2: Additional requirements and test procedures for transportable and portable assemblies (IEC 45B/307/CD:2001) |
|
DIN IEC 61746-2 |
(DRAFT) Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (IEC 86/262/CD:2006) |
|
DIN IEC 61966-2-4 |
(DRAFT) Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Optional RGB colour space - opRGB (IEC 100/872/NP:2004) |
|
DIN IEC 62022 |
(DRAFT) Radiation protection - Installed monitors for the control and detection of radioactivity of gamma emitters contained in recyclable or non-recyclable materials (IEC 45B/302/CD:2001) |
|
DIN IEC 62024-1 |
(DRAFT) High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 51/881/CD:2006) |
|
DIN IEC 62024-2 |
(DRAFT) High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter (IEC 51/878/CD:2006) |
|
DIN IEC 62025-1 |
(DRAFT) High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductor for use in electronic and telecommunication equipment (IEC 51/844/CD:2005) |
|
DIN IEC 62344 |
(DRAFT) Hydroelectric power plants - Communication for monitoring and control (IEC 57/746/CD:2005), text in English |
|
DIN IEC 62428 |
(DRAFT) Electric power engineering - Modal components in three-phase AC systems - Quantities and transformations (IEC 25/320/CD:2005) |
|
DIN IEC 62454 |
(DRAFT) Electromechanical components and mechanical structures for electronic equipment - Interface dimensions for water cooling provisions of electronic equipment within cabinets of the IEC 60297 and IEC 60917 series (IEC 48D/343/CD:2006) |
|
DIN IEC 82/238/CD |
(DRAFT) Certification and accreditation for photovoltaic (PV) components and systems (IEC 82/238/CD:2000) |
|
DIN ISO 1008 |
Photography - Paper dimensions - Pictorial sheets (ISO 1008:1992) |
|
DIN ISO 10109-1 |
Optics and optical instruments - Environmental requirements - Part 1: General information, definitions, climatic zones and their parameters (ISO 10109-1:1994) |
|
DIN ISO 10109-1 |
Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters (ISO 10109-1:2005) |
|
DIN ISO 10109-11 |
Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001) |
|
DIN ISO 10109-12 |
Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments (ISO 10109-12:2004) |
|
DIN ISO 10109-6 |
Optics and optical instruments - Environmental requirements - Part 6: Test requirements for medical optical devices (ISO 10109-6:1994) |
|
DIN ISO 10109-6 |
Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments (ISO 10109-6:2005) |
|
DIN ISO 10109-8 |
Optics and optical instruments - Environmental requirements - Part 8: Test requirements for extreme conditions of use (ISO 10109-8:1994) |
|
DIN ISO 10109-8 |
Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use (ISO 10109-8:2005) |
|
DIN ISO 1012 |
Photography - Films in sheets and rolls for general use - Dimensions (ISO 1012:1998) |
|
DIN ISO 10330 |
Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods (ISO 10330:2002) |
|
DIN ISO 10844 |
Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles (ISO 10844:1994) |
|
DIN ISO 10937 |
Optics and optical instruments - Microscopes - Diameter of interchangeable eyepieces (ISO 10937:2000) |
|
DIN ISO 11095 |
(DRAFT) Linear calibration using reference materials (ISO 11095:1996); Text German, English |
|
DIN ISO 11421 |
Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement (ISO 11421:1997) |
|
DIN ISO 11798 |
Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods (ISO 11798:1999) |
|
DIN ISO 11843-1 |
Capability of detection - Part 1: Terms and definitions (ISO 11843-1:1997, including Technical Corrigendum 1:2003) |
|
DIN ISO 11843-2 |
Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English) |
|
DIN ISO 11843-3 |
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used (ISO 11843-3:2003; text in German, English) |
|
DIN ISO 11843-4 |
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English) |
|
DIN ISO 11906 |
Micrographics - Microfilming of serials - Operating procedures (ISO 11906:1999) |
|
DIN ISO 12844 |
Raw optical glass - Grindability with diamond pellets - Test method and classification (ISO 12844:1999) |
|
DIN ISO 12853 |
Optics and optical instruments - Microscopes - Information provided to the user (ISO 12853:1997) |
|
DIN ISO 13321 |
Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996) |
|
DIN ISO 13359 |
Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length (ISO 13359:1998) |
|
DIN ISO 13472-1 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
|
DIN ISO 13473-2 |
Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002) |
|
DIN ISO 13473-3 |
Characterization of pavement texture by use of surface profiles - Part 3: Specifications and classification of profilometers (ISO 13473-3:2002) |
|
DIN ISO 13655 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images (ISO 13655:1996) |
|
DIN ISO 14133-1 |
Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments (ISO 14133-1:2006) |
|
DIN ISO 14133-2 |
Optics and optical instruments - Specifications for binoculars, monoculars and spotting scopes - Part 2: High performance instruments (ISO 14133-2:2006) |
|
DIN ISO 14135-1 |
Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments (ISO 14135-1:2003) |
|
DIN ISO 14135-2 |
Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2003) |
|
DIN ISO 14315 |
Industrial wire screens - Technical requirements and testing (ISO 14315:1997) |
|
DIN ISO 14490-1 |
Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics (ISO 14490-1:2005) |
|
DIN ISO 14490-2 |
Optics and optical instruments - Test methods for telescopic systems - Part 2: Test methods for binocular systems (ISO 14490-2:2005) |
|
DIN ISO 14490-3 |
Optics and optical instruments - Test methods for telescopic systems - Part 3: Test methods for telescopic sights (ISO 14490-3:2004) |
|
DIN ISO 14490-6 |
Optics and optical instruments - Test methods for telescopic systems - Part 6: Test methods for veiling glare index (ISO 14490-6:2005) |
|
DIN ISO 14490-7 |
Optics and optical instruments - Test methods for telescopic systems - Part 7: Test methods for limit of resolution (ISO 14490-7:2005) |
|
DIN ISO 15795 |
Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002) |
|
DIN ISO 17359 |
Condition monitoring and diagnostics of machines - General guidelines (ISO 17359:2003) |
|
DIN ISO 18906 |
Imaging materials - Photographic films - Specifications for safety film (ISO 18906:2000) |
|
DIN ISO 18910 |
Imaging materials - Photographic film and paper - Determination of curl (ISO 18910:2000) |
|
DIN ISO 18928 |
Imaging materials - Unprocessed photographic films and papers - Storage practices (ISO 18928:2002) |
|
DIN ISO 2194 |
Industrial screens - Woven wire cloth, perforated plate and electroformed sheet - Designation and nominal sizes of openings (ISO 2194:1991) |
|
DIN ISO 2240 |
Photography - Colour reversal camera films - Determination of ISO speed (ISO 2240:2003) |
|
DIN ISO 2261 |
Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion (ISO 2261:1994) |
|
DIN ISO 230-5 |
Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000) |
|
DIN ISO 2395 |
Test sieves and test sieving - Vocabulary (ISO 2395:1990) |
|
DIN ISO 2923 |
Acoustics - Measurement of noise on board vessels (ISO 2923:1996 + Technical Corrigendum 1:1997) |
|
DIN ISO 3046-6 |
Reciprocating internal combustion engines - Performance - Part 6: Overspeed protection (ISO 3046-6:1990) |
|
DIN ISO 3310-2 |
Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated plates (ISO 3310-2:1999) |
|
DIN ISO 4783-2 |
Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2: Preferred combinations for woven wire cloth (ISO 4783-2:1989) |
|
DIN ISO 4783-3 |
Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2: Preferred combinations for pre-crimped or pressure-welded wire screens (ISO 4783-3:1981) |
|
DIN ISO 517 |
Photography - Apertures and related properties pertaining to photographic lenses - Designations and measurements (ISO 517:1996) |
|
DIN ISO 5348 |
Mechanical vibration and shock - Mechanical mounting of accelerometers (ISO 5348:1998) |
|
DIN ISO 565 |
Test sieves - Metal wire cloth, perforated metal plate and electroformed sheet - Nominal sizes of openings (ISO 565:1990) |
|
DIN ISO 5768 |
Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions (ISO 5768:1996) |
|
DIN ISO 5800 |
Photography - Colour negative films for still photography - Determination of ISO speed (ISO 5800:1987 + Corr. 1:2001) |
|
DIN ISO 6 |
Black-and-white pictorial still camera negative film/process systems - Determination of ISO speed (ISO 6:1993) |
|
DIN ISO 6025 |
Cinematography - Analogue photographic sound test films, 35 mm and 16 mm - Specifications (ISO 6025:2000) |
|
DIN ISO 6428 |
Technical drawings - Requirements for microcopying (ISO 6428:1982) |
|
DIN ISO 6826 |
Reciprocating internal combustion engines - Fire protection (ISO 6826:1997) |
|
DIN ISO 69 |
Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions (ISO 69:1998) |
|
DIN ISO 6954 |
Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (ISO 6954:2000) |
|
DIN ISO 732 |
Photography - 120-size and 220-size films - Dimensions (ISO 732:2000) |
|
DIN ISO 7967-2 |
Reciprocating internal combustion engines; vocabulary of components and systems; main running gear; identical with ISO 7967-2:1987 |
|
DIN ISO 7967-3 |
Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987 |
|
DIN ISO 8036-1 |
Optics and optical instruments - Microscopes - Part 1: Immersion oil for general use in light microscopy (ISO 8036-1:1998) |
|
DIN ISO 8038-1 |
Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5 in x 1/36 in) (ISO 8038-1:1997) |
|
DIN ISO 8038-2 |
Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M 25 x 0,75 mm (ISO 8038-2:2001) |
|
DIN ISO 8039 |
Optics and optical instruments - Microscopes - Magnification (ISO 8039:1997) |
|
DIN ISO 8040 |
Optics and optical instruments - Microscopes - Dimensions of tube slide and tube slot connections (ISO 8040:2001) |
|
DIN ISO 8297 |
Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method (ISO 8297:1994) |
|
DIN ISO 8374 |
Photography - Determination of ISO safelight conditions (ISO 8374:2001) |
|
DIN ISO 8486-2 |
Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 (ISO 8486-2:1996) |
|
DIN ISO 8528-9 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:1995) |
|
DIN ISO 8758 |
Photographic control and data records on 16 mm and 35 mm motion-picture film and prints - Dimensions and location (ISO 8758:1992) |
|
DIN ISO 897 |
Photography - Roll films, 126, 110 and 135-size films - Identification of the image-bearing side (ISO 897:2000) |
|
DIN ISO 9022-1 |
Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing (ISO 9022-1:1994) |
|
DIN ISO 9022-10 |
Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold (ISO 9022-10:1998) |
|
DIN ISO 9022-11 |
Optics and optical instruments - Environmental test methods - Part 11: Mould growth (ISO 9022-11:1994) |
|
DIN ISO 9022-13 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold (ISO 9022-13:1998) |
|
DIN ISO 9022-14 |
Optics and optical instruments - Environmental test methods - Part 14: Dew, hoarfrost, ice (ISO 9022-14:1994) |
|
DIN ISO 9022-15 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold (ISO 9022-15:1998) |
|
DIN ISO 9022-16 |
Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold (ISO 9022-16:1998) |
|
DIN ISO 9022-17 |
Optics and optical instruments - Environmental test methods - Part 17: Combined contamination, solar radiation (ISO 9022-17:1994) |
|
DIN ISO 9022-18 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure (ISO 9022-18:1994) |
|
DIN ISO 9022-19 |
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration (ISO 9022-19:1994) |
|
DIN ISO 9022-2 |
Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2002) |
|
DIN ISO 9022-3 |
Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:1998) |
|
DIN ISO 9022-5 |
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994) |
|
DIN ISO 9022-6 |
Optics and optical instruments - Environmental test methods - Part 6: Dust (ISO 9022-6:1994) |
|
DIN ISO 9022-7 |
Optics and optical instrument - Environmental test methods - Part 7: Drip, rain (ISO 9022-7:1994) |
|
DIN ISO 9022-7 |
Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain (ISO 9022-7:2005) |
|
DIN ISO 9022-8 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994) |
|
DIN ISO 9022-9 |
Optics and optical instruments - Environmental test methods - Part 9: Solar radiation (ISO 9022-9:1994) |
|
DIN ISO 9211-1 |
Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994) |
|
DIN ISO 9211-3 |
Optics and optical instruments - Optical coatings - Part 3: Environmental durability (ISO 9211-3:1994) |
|
DIN ISO 9276-1 |
Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998) |
|
DIN ISO 9276-2 |
Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001) |
|
DIN ISO 9276-4 |
Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001) |
|
DIN ISO 9277 |
Determination of the specific surface area of solids by gas adsorption using the BET method (ISO 9277:1995) |
|
DIN ISO 9335 |
Optics and optical instruments - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995) |
|
DIN ISO 9336-3 |
Optics and optical instruments - Optical transfer function; Application - Part 3: Telescopes (ISO 9336-3:1994) |
|
DIN ISO 9345-2 |
Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems (ISO 9345-2:2003) |
|
DIN ISO 9613-2 |
Attenuation of sound during propagation outdoors - Part 2: General method of calculation (ISO 9613-2:1996) |
|
DIN-Fachbericht 143 |
Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods |
|
DIN-Fachbericht CEN/TR 14748 |
Non-destructive testing - Methodology for qualification of non-destructive tests; German version CEN/TR 14748:2004 |