|
DIN EN 13183-3 |
Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
|
DIN EN 13186 |
Feather and down - Specification for feather and down filled bedding articles |
|
DIN EN 13193 |
Packaging and the environment - Terminology; English version of DIN EN 13193 |
|
DIN EN 13199-1 |
Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods; English version of DIN EN 13199-1 |
|
DIN EN 13199-3 |
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS); English version of DIN EN 13199-3 |
|
DIN EN 13226 |
Wood flooring - Solid parquet element with grooves and/or tongues |
|
DIN EN 13227 |
Wood flooring - Solid lamparquet products |
|
DIN EN 13228 |
Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system |
|
DIN EN 13246 |
Packaging - Specification for tensional steel strapping; English version of DIN EN 13246 |
|
DIN EN 13247 |
Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads; English version of DIN EN 13247 |
|
DIN EN 13249 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of roads and other trafficked areas |
|
DIN EN 13250 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of railways |
|
DIN EN 13251 |
Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures |
|
DIN EN 13252 |
Geotextiles and geotextile-related products - Required characteristics for use in drainage systems |
|
DIN EN 13253 |
Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems |
|
DIN EN 13254 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of reservoirs and dams |
|
DIN EN 13255 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of canals |
|
DIN EN 13256 |
Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures |
|
DIN EN 13257 |
Geotextiles and geotextile-related products - Required characteristics for use in solid waste disposals |
|
DIN EN 13265 |
Geotextiles and geotextile-related products - Required characteristics for use in liquid waste containment projects |
|
DIN EN 1328 |
Cement-bonded particleboard - Determination of frost resistance |
|
DIN EN 13297 |
Textile floor coverings - Classification of needled pile floor coverings; English version of DIN EN 13297 |
|
DIN EN 13307-1 |
Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
|
DIN EN 13335 |
Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method |
|
DIN EN 13336 |
Leather - Upholstery leather characteristics - Guide for selection of leather for furniture |
|
DIN EN 13353 |
Solid wood panels (SWP) - Requirements |
|
DIN EN 13360 |
Rubber- or plastics-coated fabrics - Terminology; Trilingual version EN 13360:2002 |
|
DIN EN 13361 |
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
|
DIN EN 13362 |
Geosynthetic Barriers - Characteristics required for use in the construction of canals |
|
DIN EN 13382 |
Flat pallets for materials handling - Principal dimensions |
|
DIN EN 13392 |
Textiles - Monofilaments - Determination of linear density; English version of DIN EN 13392 |
|
DIN EN 13393 |
Packaging - Specification for edge protectors; English version of DIN EN 13393 |
|
DIN EN 13394 |
Packaging - Specification for non-metallic tensional strapping; English version of DIN EN 13394 |
|
DIN EN 13400 |
Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; English version of DIN EN 13400 |
|
DIN EN 13400 Berichtigung 1 |
Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces; Corrigendum 1 to English version of DIN EN 13400:2002-04 |
|
DIN EN 13402-1 |
Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified); English version of DIN EN 13402-1 |
|
DIN EN 13402-2 |
Size designation of clothes - Part 2: Primary and secondary dimensions |
|
DIN EN 13402-3 |
Size designation of clothes - Part 3: Measurements and intervals |
|
DIN EN 13417-1 |
Reinforcement - Specifications for woven fabrics - Part 1: Designation; English version of DIN EN 13417-1 |
|
DIN EN 13417-2 |
Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements; English version EN 13417-2 |
|
DIN EN 13417-3 |
Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements; English version of DIN EN 13417-3 |
|
DIN EN 13427 |
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
|
DIN EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
DIN EN 13429 |
Packaging - Reuse |
|
DIN EN 13430 |
Packaging - Requirements for packaging recoverable by material recycling |
|
DIN EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
DIN EN 13437 |
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
|
DIN EN 13440 |
Packaging - Rate of recycling - Definition and method of calculation |
|
DIN EN 13442 |
Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
|
DIN EN 13446 |
Wood-based panels - Determination of withdrawal capacity of fasteners |
|
DIN EN 13457 |
Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
|
DIN EN 13461 |
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; English version of DIN EN 13461 |
|
DIN EN 13473-1 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; English version of DIN EN 13473-1 |
|
DIN EN 13473-2 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; English version of DIN EN 13473-2 |
|
DIN EN 13473-3 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; English version of DIN EN 13473-3 |
|
DIN EN 13488 |
Wood flooring - Mosaic parquet elements |
|
DIN EN 13489 |
Wood flooring - Multi-layer parquet elements |
|
DIN EN 13491 |
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
DIN EN 13492 |
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
DIN EN 13493 |
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
|
DIN EN 13512 |
Footwear - Test methods for uppers and lining - Flex resistance; English version of DIN EN 13512 |
|
DIN EN 13514 |
Footwear - Test methods for uppers - Delamination resistance; English version of DIN EN 13514 |
|
DIN EN 13515 |
Footwear - Test methods for uppers and lining - Water vapour permeability and absorption; English version of DIN EN 13515 |
|
DIN EN 13517 |
Footwear - Test methods for uppers, lining and insocks - Colour migration; English version of DIN EN 13517 |
|
DIN EN 13518 |
Footwear - Test methods for uppers - Water resistance |
|
DIN EN 13519 |
Footwear - Test methods for uppers - High-temperature behaviour; English version of DIN EN 13519 |
|
DIN EN 13521 |
Footwear - Test methods for uppers, lining and insocks - Thermal insulation; English version of DIN EN 13521 |
|
DIN EN 13522 |
Footwear - Test methods for uppers - Breaking strength and elongation; English version of DIN EN 13522 |
|
DIN EN 13536 |
Manufactured articles filled with feather and down - Requirements for clothing - Light use; English version of DIN EN 13536 |
|
DIN EN 13540 |
Leather - Physical and mechanical tests - Determination of heat resistance of patent leather |
|
DIN EN 13542 |
Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing; English version of DIN EN 13542 |
|
DIN EN 13543 |
Manufactured articles filled with feather and down - Measurement of water absorption of filling material; English version of DIN EN 13543 |
|
DIN EN 13545 |
Pallet superstructures - Pallet collars - Test methods and performance requirements |
|
DIN EN 13556 |
Round and sawn timber - Nomenclature of timbers used in Europe; Trilingual version EN 13556:2003 |
|
DIN EN 13562 |
Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydraulic pressure test); English version of DIN EN 13562 |
|
DIN EN 13569 |
Cabinet roller towels - Performance requirements and processing; English version of DIN EN 13569 |
|
DIN EN 13571 |
Footwear - Test methods for uppers, lining and insocks - Tear strength; English version of DIN EN 13571 |
|
DIN EN 13571 Berichtigung 1 |
Footwear - Test methods for uppers, lining and insocks - Tear strength Corrigendum 1 to English version of DIN EN 13571:2002-04 |
|
DIN EN 13572 |
Footwear - Test methods for uppers, lining and insocks - Seam strength; English version of DIN EN 13572 |
|
DIN EN 13590 |
Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
|
DIN EN 13592 |
Plastics sacks for household waste collection - Types, requirements and test methods |
|
DIN EN 13593 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
|
DIN EN 13626 |
Packaging - Box pallets - General requirements and test methods |
|
DIN EN 13628-1 |
Flexible packaging materials - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
|
DIN EN 13628-2 |
Flexible packaging materials - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
|
DIN EN 13629 |
Wood flooring - Solid pre-assembled hardwood board |
|
DIN EN 13647 |
Wood and parquet flooring and wood panelling and cladding - Determination of geometrical characteristics |
|
DIN EN 13676 |
Polymer coated paper and board intended for food contact - Detection of pinholes; English version of DIN EN 13676 |
|
DIN EN 13698-1 |
Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets |
|
DIN EN 13719 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers |
|
DIN EN 13719 Berichtigung 1 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; Corrigenda to DIN EN 13719:2002-12 |
|
DIN EN 13745 |
Surfaces for sports areas - Determination of specular reflectance |
|
DIN EN 13746 |
Surfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost and heat conditions |
|
DIN EN 13756 |
Wood flooring - Terminology; Trilingual version EN 13756:2002 |
|
DIN EN 13758-1 |
Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics (includes Amendment A1:2006) |
|
DIN EN 13758-2 |
Textiles - Solar UV protective properties - Part 2: Classification and marking of apparel (includes Amendment A1:2006) |
|
DIN EN 13770 |
Textiles - Determination of the abrasion resistance of knitted footwear garments |
|
DIN EN 13772 |
Textiles and textile products - Burning behaviour of curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
|
DIN EN 13773 |
Textiles and textile products - Burning behaviour of curtains and drapes - Classification scheme |
|
DIN EN 13780 |
Touch and close fasteners - Determination of longitudinal shear strength |
|
DIN EN 13844 |
Textiles - Monofilaments - Determination of thermal shrinkage |
|
DIN EN 13855-1 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation |
|
DIN EN 13855-2 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 2: Test method by oscillation |
|
DIN EN 13876 |
Transport - Logistics and services; Goods transport chains - Code of practice for the provision of cargo transport services |
|
DIN EN 13879 |
Wood-based panels - Determination of edgewise bending properties |
|
DIN EN 13891 |
Tensional strapping - Guide to selection and use of tensional strapping |
|
DIN EN 13893 |
Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
|
DIN EN 13895 |
Textiles - Monofilaments - Determination of tensile properties |
|
DIN EN 1391 |
Adhesives for leather and footwear materials - Method for evaluating the bondability of materials - Minimum requirements and material classification |
|
DIN EN 13972 |
Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity |
|
DIN EN 13973 |
Rigid plastics containers - Method for determination of drainability |
|
DIN EN 13974 |
Rigid plastics containers - Specification of tolerance for dimensions, weight and volume |
|
DIN EN 13986 |
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
|
DIN EN 13990 |
Wood flooring - Solid softwood floor boards |
|
DIN EN 14020-1 |
Reinforcements - Specification for textile glass rovings - Part 1: Designation |
|
DIN EN 14020-2 |
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
|
DIN EN 14020-3 |
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
|
DIN EN 14030 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) (includes Amendment A1:2003) |
|
DIN EN 14041 |
Resilient, textile and laminate floor coverings - Essential characteristics |
|
DIN EN 14045 |
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
|
DIN EN 14046 |
Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
|
DIN EN 14047 |
Packaging of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
|
DIN EN 14048 |
Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
|
DIN EN 14053 |
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
|
DIN EN 14065 |
Textiles - Laundry processed textiles - Biocontamination control system |
|
DIN EN 14080 |
Timber structures - Glued laminated timber - Requirements |
|
DIN EN 14081-1 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
|
DIN EN 14081-3 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control |
|
DIN EN 14115 |
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; English version of DIN EN 14115 |
|
DIN EN 14118-1 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
|
DIN EN 14118-2 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
|
DIN EN 14118-3 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
|
DIN EN 14119 |
Testing of textiles - Evaluation of the action of microfungi |
|
DIN EN 14149 |
Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop |
|
DIN EN 1415 |
Touch and close fasteners - Behaviour of slit selvedges |
|
DIN EN 14150 |
Geosynthetic barriers - Determination of permeability to liquids |
|
DIN EN 1416 |
Touch and close fasteners - Determination of curvature |
|
DIN EN 14182 |
Packaging - Terminology - Basic terms and definitions |
|
DIN EN 14196 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
|
DIN EN 14215 |
Textile floor coverings - Classification of machine-made pile rugs and runners |
|
DIN EN 14220 |
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
|
DIN EN 14221 |
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
|
DIN EN 14251 |
Structural round timber - Test methods |
|
DIN EN 14278-1 |
Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device |
|
DIN EN 14278-2 |
Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device |
|
DIN EN 14278-3 |
Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device |
|
DIN EN 14279 |
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
|
DIN EN 14288 |
Leather - Physical and mechanical tests - Determination of fogging characteristics |
|
DIN EN 14289 |
Leather - Physical and mechanical tests - Determination of water penetration pressure |
|
DIN EN 14298 |
Sawn timber - Assessment of drying quality |
|
DIN EN 1432 |
Swap bodies - Swap tanks - Dimensions, requirements, test methods and operating conditions |
|
DIN EN 14322 |
Wood-based panels - Melamine faced boards for interior uses - Definitons, requirements and classification |
|
DIN EN 14323 |
Wood-based panels - Melamine faced boards for interior uses - Test methods |
|
DIN EN 14326 |
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
|
DIN EN 14327 |
Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
|
DIN EN 14340 |
Leather - Physical and mechanical tests - Determination of water repellency of garment leather |
|
DIN EN 14342 |
Wood flooring - Characteristics, evaluation of conformity and marking |
|
DIN EN 14354 |
Wood-based panels - Wood veneer floor covering |
|
DIN EN 14358 |
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample |
|
DIN EN 14360 |
Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
|
DIN EN 14374 |
Timber structures - Structural laminated veneer lumber - Requirements |
|
DIN EN 14375 |
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
|
DIN EN 1438 |
Symbols for timber and wood-based products |
|
DIN EN 14391 |
Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
|
DIN EN 14401 |
Rigid plastics containers - Methods to test the effectiveness of closures |
|
DIN EN 14414 |
Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
|
DIN EN 14415 |
Geosynthetic barriers - Test method for determining the resistance to leaching |
|
DIN EN 14465 |
Textiles - Upholstery fabrics - Specification and methods of test |
|
DIN EN 14477 |
Packaging, Flexible packaging material - Determination of puncture resistance - Test methods |
|
DIN EN 14479 |
Packaging, Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method |
|
DIN EN 14499 |
Textile floor coverings - Minimum requirements for carpet underlays |
|
DIN EN 14574 |
Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
|
DIN EN 14575 |
Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
|
DIN EN 14576 |
Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
|
DIN EN 14602 |
Footwear - Test methods for the assessment of ecological criteria |
|
DIN EN 14621 |
Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns |
|
DIN EN 14634 |
Glass packaging - 26 H 180 crown finish - Dimensions |
|
DIN EN 14635 |
Glass packaging - 26 H 126 crown finish - Dimensions |
|
DIN EN 14682 |
Safety of children's clothing - Cords and drawstrings on children's clothing - Specifications |
|
DIN EN 14684 |
Polyester fibre ropes - Double braid construction |
|
DIN EN 14685 |
Polyamide fibre ropes - Double braid construction |
|
DIN EN 14686 |
Fibre ropes of polyester/polyolefin dual fibres |
|
DIN EN 14687 |
Mixed polyolefin fibre ropes |
|
DIN EN 1470 |
Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
|
DIN EN 14704-1 |
Determination of the elasticity of fabrics - Part 1: Strip tests |
|
DIN EN 14704-3 |
Determination of the elasticity of fabrics - Part 3: Narrow fabrics |
|
DIN EN 1471 |
Textile floor coverings - Assessment of changes in appearance (includes amendment A1:2003) |
|
DIN EN 14755 |
Extruded particleboards - Specifications |
|
DIN EN 14761 |
Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick |
|
DIN EN 14762 |
Wood flooring - Sampling procedures for evaluation of conformity |
|
DIN EN 14768 |
Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l |
|
DIN EN 14798 |
Glass packaging - Hand-held crown bottle openers - Dimensions |
|
DIN EN 14806 |
Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test |
|
DIN EN 14847 |
Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture |
|
DIN EN 14848 |
Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups |
|
DIN EN 14850 |
Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height |
|
DIN EN 14851 |
Aerosol containers - Aerosol foam flammability test |
|
DIN EN 14852 |
Aerosol containers - Determination of the ignition distance of the spray jet |
|
DIN EN 14853 |
Aerosol containers - Enclosed space ignition test |
|
DIN EN 14854 |
Aerosol containers - Glass containers - Dimensions of the neck finish |
|
DIN EN 14867 |
Packaging - Plastic freezer bags - Specifications and test methods |
|
DIN EN 14887 |
Glass packaging - Cork removal devices - General requirements |
|
DIN EN 14900 |
Textile floor coverings - Determination of the density of the textile fleece backing |
|
DIN EN 14915 |
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
|
DIN EN 14932 |
Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods |
|
DIN EN 14951 |
Solid hardwood panelling and cladding - Machined profiles elements |
|
DIN EN 14959 |
Touch and close fasteners - Determination of resistance to fraying after washing |
|
DIN EN 14970 |
Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics |
|
DIN EN 14971 |
Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area |
|
DIN EN 14976 |
Textiles - Mattress ticking - Specifications and test methods |
|
DIN EN 14979 |
Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 |
|
DIN EN 15006 |
Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture |
|
DIN EN 15007 |
Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans |
|
DIN EN 15008 |
Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture |
|
DIN EN 15009 |
Aerosol containers - Compartmented aerosol containers |
|
DIN EN 15010 |
Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch |
|
DIN EN 15114 |
Textile floor coverings - Classification of textile floor coverings without pile |
|
DIN EN 15115 |
Textile floor coverings - Determination of sensitivity to spilled water |
|
DIN EN 15146 |
Solid softwood panelling and cladding - Machined profiles without tongue and groove |
|
DIN EN 1533 |
Wood and parquet flooring - Determination of bending properties - Test methods; English version of DIN EN 1533 |
|
DIN EN 1534 |
Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method; English version of DIN EN 1534 |
|
DIN EN 1611-1 |
Sawn timber - Appearance grading of softwood - Part 1: European spruces, firs, pines, Douglas firs and larches (includes Amendment A1:2002) |
|
DIN EN 1625 |
Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens |
|
DIN EN 1734 |
Rubber- or plastic-coated fabrics - Determination of resistance to water penetration by the low pressure method |
|
DIN EN 1735 |
Rubber- or plastic-coated fabrics - Determination of flexibility |
|
DIN EN 1807 |
Safety of wood working machines - Band sawing machines |
|
DIN EN 1813 |
Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
|
DIN EN 1814 |
Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
|
DIN EN 1815 |
Resilient and textile floor coverings - Assessment of static electrical propensity |
|
DIN EN 1870-1 |
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table) and dimension saws |
|
DIN EN 1870-10 |
Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
DIN EN 1870-11 |
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
|
DIN EN 1870-12 |
Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross cut-sawing machines |
|
DIN EN 1870-15 |
Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
|
DIN EN 1870-16 |
Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting |
|
DIN EN 1870-2 |
Safety of woodworking machines - Circular sawing machines - Part 2: Horizontal beam panel saws and vertical panel saws |
|
DIN EN 1870-3 |
Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches; English version of DIN EN 1870-3 |
|
DIN EN 1870-4 |
Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading; English version of DIN EN 1870-4 |
|
DIN EN 1870-5 |
Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
|
DIN EN 1870-6 |
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches with manual loading and/or unloading |
|
DIN EN 1870-7 |
Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading; English version of DIN EN 1870-7 |
|
DIN EN 1870-9 |
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading; English version of DIN EN 1870-9 |
|
DIN EN 1875-3 |
Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method |
|
DIN EN 1876-1 |
Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test |
|
DIN EN 1876-2 |
Rubber- or plastics-coated fabrics - Low-temperature tests - Part 2: Impact test on loop |
|
DIN EN 1882 |
Feather and down - Test methods - Determination of the commercial mass of a lot of feather and down |
|
DIN EN 1883 |
Feather and down - Sampling in view of tests |
|
DIN EN 1884 |
Feather and down - Test methods - Determination of microbiological state |
|
DIN EN 1885 |
Feather and down - Terms and definitions (includes amendment A1:2003) |
|
DIN EN 1897 |
Geotextiles and geotextile-related products - Determination of the compressive creep properties; English version of DIN EN 1897 |
|
DIN EN 1910 |
Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability; English version of DIN EN 1910 |
|
DIN EN 20105-A02 |
Tests for colour fastness of textiles - Grey scale for assessing change in colour (ISO 105-A02) |
|
DIN EN 20105-A03 |
Tests for colour fastness of textiles - Grey scale for assessing staining (ISO 105-A03:1993) |
|
DIN EN 209 |
Steel drums - Removable head (open head) drums with a minimum total capacity iof 210 l; English version of DIN EN 209 |
|
DIN EN 210 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; English version of DIN EN 210 |
|
DIN EN 22206 |
Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987); german version EN 22206:1992 |
|
DIN EN 22248 |
Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992 |
|
DIN EN 22876 |
Packaging; complete, filled transport packages; rolling test (ISO 2876:1985); german version EN 22876:1992 |
|
DIN EN 24178 |
Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992 |
|
DIN EN 24180-1 |
Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992 |
|
DIN EN 24180-2 |
Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992 |
|
DIN EN 25978 |
Rubber- or plastics-coated fabrics; determination of blocking resistance (ISO 5978:1990); German version EN 25978:1993 |
|
DIN EN 26591-1 |
Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984); german version EN 26591-1:1992 |
|
DIN EN 26591-2 |
Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985); german version EN 26591-2:1992 |
|
DIN EN 26599-1 |
Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983); german version EN 26599-1:1992 |
|
DIN EN 27023 |
Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983); german version EN 27023:1992 |
|
DIN EN 277 |
Sacks for the transport of food aid - Sacks made of woven polypropylene fabric |
|
DIN EN 27965-1 |
Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984); german version EN 27965-1:1992 |
|
DIN EN 283 |
Swap bodies; testing; german version EN 283:1991 |
|
DIN EN 284 |
Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements |
|
DIN EN 284 |
Swap bodies; swap bodies of class C; dimensions and general requirements; german version EN 284:1992 |
|
DIN EN 28474 |
Packaging; Complete, filled transport packages; water immersion test (ISO 8474:1986); german version EN 28474:1992 |
|
DIN EN 28768 |
Packaging; complete, filled transport packages; toppling test (ISO 8768:1986); german version EN 28768:1992 |
|
DIN EN 29008 |
Glass bottles - Determination of verticality (ISO 9008:1991) |
|
DIN EN 29009 |
Glass containers - Determination of height and non-parallelism of finish with reference to container base (ISO 9009:1991) |
|
DIN EN 29073-1 |
Textiles; test method for nonwovens; part 1: determination of mass per unit area (ISO 9073-1:1989); german version EN 29073-1:1992 |
|
DIN EN 29073-3 |
Textiles; test method for nonwovens; part 3: determination of tensile strength and elongation (ISO 9073-3:1989); german version EN 29073-3:1992 |
|
DIN EN 29092 |
Textiles; nonwowens; definition (ISO 9092:1988); german version EN 29092:1992 |
|
DIN EN 29865 |
Textiles; determination of water-repellency of fabrics by the Bundesmann rain-shower test (ISO 9865:1991); German version EN 29865:1993 |
|
DIN EN 29885 |
Wide-mouth glass containers - Determination of deviation from flatness of top sealing surface (ISO 9885:1991) |
|
DIN EN 300 |
Oriented Strand Boards (OSB) - Definitions, classification and specifications |
|
DIN EN 309 |
Particleboards - Definition and classification |
|
DIN EN 310 |
Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993 |
|
DIN EN 31092 |
Measurement of thermal and water vapour resistance of textiles under steady-state conditions (sweating guarded-hotplate test) (ISO 11 092:1993) |
|
DIN EN 311 |
Wood-based panels - Surface soundness - Test method |
|
DIN EN 312 |
Particleboards - Specifications |
|
DIN EN 313-1 |
Plywood - Classification and terminology - Classification |
|
DIN EN 313-2 |
Plywood - Classification and terminology - Part 2: Terminology; German version EN 313-2:1999 |
|
DIN EN 314-1 |
Plywood - Bonding quality - Part 1: Test methods |
|
DIN EN 314-2 |
Plywood; bonding quality; part 2: requirements; German version EN 314-2:1993 |
|
DIN EN 315 |
Plywood - Tolerances for dimensions; English version of DIN EN 315 |
|
DIN EN 316 |
Fibreboard - Definition, classification and symbols |
|
DIN EN 317 |
Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993 |
|
DIN EN 318 |
Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; English version of DIN EN 318 |
|
DIN EN 319 |
Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993 |
|
DIN EN 320 |
Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993 |
|
DIN EN 321 |
Wood-based panels - Determination of moisture resistance under cyclic test conditions; English version of DIN EN 321 |
|
DIN EN 322 |
Wood-based panels; determination of moisture content; German version EN 322:1993 |
|
DIN EN 323 |
Wood-based panels; determination of density; German version EN 323:1993 |
|
DIN EN 324-1 |
Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length; German version EN 324-1:1993 |