|
DIN EN 324-2 |
Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness; German version EN 324-2:1993 |
|
DIN EN 326-1 |
Sampling, cutting and inspection of wood-based panel products - Sampling and cutting of test pieces and expression of test results |
|
DIN EN 326-2 |
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; English version of DIN EN 326-2 |
|
DIN EN 326-2 Berichtigung 1 |
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; Corrigenda 1 to DIN EN 326-2:2000-10 |
|
DIN EN 326-3 |
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
|
DIN EN 335-1 |
Durability of wood and wood-based products - Definition of use classes - Part 1: General |
|
DIN EN 335-2 |
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
|
DIN EN 335-3 |
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Application to wood-based panels |
|
DIN EN 336 |
Structural timber - Sizes, permitted deviations |
|
DIN EN 338 |
Structural timber - Strength classes |
|
DIN EN 350-1 |
Natural durability of solid wood - Guide to the principles of testing and classification of the natural durability of wood |
|
DIN EN 350-2 |
Natural durability of solid wood - Guide to the natural durability and treatability of selected wood species of importance in Europe |
|
DIN EN 351-1 |
Preservative-treated solid wood - Classification of preservative penetration and retention |
|
DIN EN 351-2 |
Preservative-treated solid wood - Guidance on sampling for the analysis of preservative-treated wood |
|
DIN EN 382-1 |
Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993 |
|
DIN EN 382-2 |
Fibreboard - Determination of surface absorption - Test method for hardboard |
|
DIN EN 384 |
Structural timber - Determination of characteristic values of mechanical properties and density |
|
DIN EN 385 |
Finger-jointed structural timber - Performance requirements and minimum production requirements; English version of DIN EN 385 |
|
DIN EN 386 |
Glued laminated timber - Performance requirements and minimum production requirements; English version of DIN EN 386 |
|
DIN EN 387 |
Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements; English version of DIN EN 387 |
|
DIN EN 390 |
Glued laminated timber - Sizes and permissible deviations |
|
DIN EN 392 |
Glued laminated timber - Shear test of glue lines |
|
DIN EN 408 |
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
|
DIN EN 415-1 |
Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment; English version of DIN EN 415-1 |
|
DIN EN 415-2 |
Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; English version of DIN EN 415-2 |
|
DIN EN 415-3 |
Safety of packaging machines - Part 3: Form, fill and seal machines; English version of DIN EN 415-3 |
|
DIN EN 415-4 |
Safety of packaging machines - Part 4: Palletisers and depalletisers |
|
DIN EN 415-5 |
Safety of packaging machines - Part 5: Wrapping machines |
|
DIN EN 415-7 |
Safety of packaging machines - Part 7: Group and secondary packaging machines |
|
DIN EN 452 |
Class A swap bodies - Dimensions and general requirements |
|
DIN EN 460 |
Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
|
DIN EN 599-2 |
Performance of wood preservatives as determined by biological tests - Classification and labelling |
|
DIN EN 622-1 |
Fibreboard - Specifications - Part 1: General requirements |
|
DIN EN 622-2 |
Fibreboards - Specifications - Part 2: Requirements for hardboards |
|
DIN EN 622-2 Berichtigung 1 |
Fibreboards - Specifications - Part 2: Requirements for hardboards; Corrigenda 1 to DIN EN 622-2:2004-07 |
|
DIN EN 622-3 |
Fibreboards - Specifications - Part 3: Requirements for medium board |
|
DIN EN 622-4 |
Fibreboard - Specifications - Part 4: Requirements for softboard |
|
DIN EN 622-5 |
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
|
DIN EN 633 |
Cement-bonded particleboards; definition and classification; German version EN 633:1993 |
|
DIN EN 634-1 |
Cement-bonded particleboard - General requirements |
|
DIN EN 635-1 |
Classification of plywood by surface appearance - General |
|
DIN EN 635-3 |
Classification of plywood by surface appearance - Softwood |
|
DIN EN 635-5 |
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
|
DIN EN 636 |
Plywood - Specifications |
|
DIN EN 672 |
Resilient floor coverings - Determination of apparent density of agglomerated cork; German version EN 672:1996 |
|
DIN EN 685 |
Resilient, textile and laminate floor coverings - Classification |
|
DIN EN 717-1 |
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
|
DIN EN 717-2 |
Wood-based panel products -Determination of formaldehyde release by the gas analysis method |
|
DIN EN 765 |
Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only |
|
DIN EN 766 |
Sacks for the transport of food aid - Sacks made of jute fabric |
|
DIN EN 767 |
Sacks for the transport of food aid - Sacks made of woven jute/polyolefin fabric |
|
DIN EN 768 |
Sacks for the transport of food aid - Sacks made of lined cotton fabric |
|
DIN EN 769 |
Sacks for the transport of food aid - Sacks made of woven cotton/polyolefin fabric |
|
DIN EN 770 |
Sacks for the transport of food aid - Paper sacks |
|
DIN EN 787 |
Sacks for the transport of food aid - Sacks made of polyethylene film |
|
DIN EN 788 |
Sacks for the transport of food aid - Tubular sacks made of composite film |
|
DIN EN 789 |
Timber structures - Test methods - Determination of mechanical properties of wood based panels |
|
DIN EN 844-1 |
Round and sawn timber - Terminology - General terms common to round timber and sawn timber |
|
DIN EN 844-10 |
Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack; Trilingual version EN 844-10:1998 |
|
DIN EN 844-11 |
Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects; Trilingual version EN 844-11:1998 |
|
DIN EN 844-12 |
Round and sawn timber - Terminology - Part 12: Additional terms and general index; German version EN 844-12:2000 |
|
DIN EN 844-2 |
Round and sawn timber - Terminology - Part 2: General terms relating to round timber; German version EN 844-2:1997 |
|
DIN EN 844-3 |
Round and sawn timber - Terminology - General terms relating to sawn timber |
|
DIN EN 844-4 |
Round and sawn timber - Terminology - Part 4: Terms relating to moisture content; German version EN 844-4:1997 |
|
DIN EN 844-5 |
Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber; German version EN 844-5:1997 |
|
DIN EN 844-6 |
Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber; German version EN 844-6:1997 |
|
DIN EN 844-7 |
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber; German version EN 844-7:1997 |
|
DIN EN 844-9 |
Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber; German version EN 844-9:1997 |
|
DIN EN 847-1 |
Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades |
|
DIN EN 847-3 |
Tools for woodworking - Safety requirements - Part 3: Clamping devices |
|
DIN EN 848-1 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
|
DIN EN 848-1/A1 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; English version of DIN EN 848-1:1998/A1:2000 |
|
DIN EN 848-2 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines |
|
DIN EN 848-3 |
Safety of woodworking machines - One-side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines |
|
DIN EN 859 |
Safety of woodworking machines - Handfed surface planing machines |
|
DIN EN 860 |
Safety of woodworking machines - One-side thickness planing machines |
|
DIN EN 861 |
Safety of woodworking machines - Surface planing and thicknessing machines |
|
DIN EN 930 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
|
DIN EN 930/A1 |
Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
|
DIN EN 931/A1 |
Footwear manufacturing machines - Lasting machines - Safety requirements |
|
DIN EN 940 |
Safety of woodworking machines - Combined woodworking machines |
|
DIN EN 972 |
Tannery machines - Reciprocating roller machines - Safety requirements |
|
DIN EN 975-2 |
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars |
|
DIN EN 984 |
Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings; English version of DIN EN 984 |
|
DIN EN 986 |
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
|
DIN EN 994 |
Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
|
DIN EN 995 |
Textile floor coverings - Determination of the creep of backing |
|
DIN EN ISO 10306 |
Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993) |
|
DIN EN ISO 10318 |
Geosynthetics - Terms and definitions (ISO 10318:2005); Trilingual version EN ISO 10318:2006 |
|
DIN EN ISO 10319 |
Geotextiles - Wide-width tensile test (ISO 10 319:1993) |
|
DIN EN ISO 10320 |
Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) |
|
DIN EN ISO 10321 |
Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10 321:1992) |
|
DIN EN ISO 10528 |
Commercial laundering procedure for textile fabrics prior to flammability testing (ISO 10528:1995) |
|
DIN EN ISO 10548 |
Carbon fibre - Determination of size content (ISO 10548:2002) |
|
DIN EN ISO 105-A05 |
Tests for colour fastness of textiles - Part A05: Instrumental assessment of change in colour for determination of grey scale rating (ISO 105-A05:1996, including Technical Corrigendum 1:1997) |
|
DIN EN ISO 105-A06 |
Tests for colour fastness of textiles - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995) |
|
DIN EN ISO 105-A08 |
Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement (ISO 105-A08:2001) |
|
DIN EN ISO 105-B03 |
Tests for colour fastness of textiles - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:1994) |
|
DIN EN ISO 105-B04 |
Tests for colour fastness of textiles - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) |
|
DIN EN ISO 105-B05 |
Tests for colour fastness of textiles - Detection and assessment of photochromism (ISO 105-B05:1993) |
|
DIN EN ISO 105-B06 |
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) |
|
DIN EN ISO 105-B08 |
Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995) |
|
DIN EN ISO 105-C07 |
Textiles - Tests for colour fastness - Part C07: Colour fastness to wet scrubbing of pigment printed textiles (ISO 105-C07:1999); English version of DIN EN ISO 105-C07 |
|
DIN EN ISO 105-C08 |
Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator (ISO 105-C08:2001) |
|
DIN EN ISO 105-C09 |
Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering; Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator (ISO 105-C09:2001) |
|
DIN EN ISO 105-C12 |
Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004) |
|
DIN EN ISO 105-D02 |
Tests for colour fastness of textiles - Colour fastness to rubbing: Organic solvents (ISO 105-D02:1993) |
|
DIN EN ISO 105-E05 |
Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2006) |
|
DIN EN ISO 105-E06 |
Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali |
|
DIN EN ISO 105-E08 |
Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water (ISO 105-E08:1994); German version EN ISO 105-E08:1996 |
|
DIN EN ISO 105-E09 |
Tests for colour fastness of textiles - Part E09: Colour fastness to potting (ISO 105-E09:1989) |
|
DIN EN ISO 105-E10 |
Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing (ISO 105-E10:1994); German version EN ISO 105-E10:1996 |
|
DIN EN ISO 105-E11 |
Tests for colour fastness of textiles - Part E11: Colour fastness to steaming (ISO 105-E11:1994) |
|
DIN EN ISO 105-E14 |
Tests for colour fastness of textiles - Part E14: Colour fastness to acid-felting (mild) (ISO 105-E14:1994) |
|
DIN EN ISO 105-G01 |
Tests for colour fastness of textiles - Colour fastness to nitrogen oxides (ISO 105-G01:1993) |
|
DIN EN ISO 105-G02 |
Tests for colour fastness of textiles - Part G02: Colour fastness to burnt-gas fumes (ISO 105-G02:1993, including Technical Corrigendum 1:1995) |
|
DIN EN ISO 105-G03 |
Tests for colour fastness of textiles - Part G03: Colour fastness to ozone in the atmosphere (ISO 105-G03:1993) |
|
DIN EN ISO 105-J01 |
Textiles - Tests for colour fastness - Part J01: General principles for measurement of surface colour (ISO 105-J01:1997) |
|
DIN EN ISO 105-J02 |
Textiles - Tests for colour fastness - Part J02: Instrumental assessment of relative whiteness (ISO 105-J02:1997, including Technical Corrigendum 1:1998) |
|
DIN EN ISO 105-J03 |
Tests for colour fastness of textiles - Part J03: Calculation of colour differences (ISO 105-J03:1995, including Technical Corrigendum 1:1996) |
|
DIN EN ISO 105-N04 |
Tests for colour fastness of textiles - Colour fastness to bleaching: Sodium chlorite (severe) (ISO 105-N04:1993) |
|
DIN EN ISO 105-N05 |
Tests for colour fastness of textiles - Colour fastness to stoving (ISO 105-N05:1993) |
|
DIN EN ISO 105-S01 |
Tests for colour fastness of textiles - Colour fastness to vulcanization: Hot air (ISO 105-S01:1993) |
|
DIN EN ISO 105-S02 |
Tests for colour fastness of textiles - Colour fastness to vulcanization: Sulfur monochloride (ISO 105-S02:1993) |
|
DIN EN ISO 105-S03 |
Tests for colour fastness of textiles - Colour fastness to vulcanization: Open steam (ISO 105-S03:1993) |
|
DIN EN ISO 105-X01 |
Tests for colour fastness of textiles - Colour fastness to carbonizing: Aluminium chloride (ISO 105-X01:1993) |
|
DIN EN ISO 105-X02 |
Tests for colour fastness of textiles - Colour fastness to carbonizing: Sulfuric acid (ISO 105-X02:1993) |
|
DIN EN ISO 105-X04 |
Tests for colour fastness of textiles - Part X04: Colour fastness to mercerizing (ISO 105-X04:1994) |
|
DIN EN ISO 105-X06 |
Tests for colour fastness of textiles - Part X06: Colour fastness to soda boiling (ISO 105-X06:1994) |
|
DIN EN ISO 105-X08 |
Tests for colour fastness of textiles - Part X08: Colour fastness to degumming (ISO 105-X08:1994) |
|
DIN EN ISO 105-X09 |
Tests for colour fastness of textiles - Colour fastness to formaldehyde (ISO 105-X09:1993) |
|
DIN EN ISO 105-X10 |
Tests for colour fastness of textiles - Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993) |
|
DIN EN ISO 105-X13 |
Tests for colour fastness of textiles - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994) |
|
DIN EN ISO 105-X14 |
Tests for colour fastness of textiles - Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate (ISO 105-X14:1994) |
|
DIN EN ISO 105-Z02 |
Tests for colour fastness of textiles - Colour fastness to metals in the dye-bath: Iron and copper (ISO 105-Z02:1993) |
|
DIN EN ISO 105-Z03 |
Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03:1996); German version EN ISO 105-Z03:1998 |
|
DIN EN ISO 105-Z04 |
Tests for colour fastness of textiles - Part Z04: Dispersibility of disperse dyes (ISO 105-Z04:1995) |
|
DIN EN ISO 105-Z05 |
Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes (ISO 105-Z05:1996); German version EN ISO 105-Z05:1997 |
|
DIN EN ISO 105-Z06 |
Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration (ISO 105-Z06:1998); English version of DIN EN ISO 105-Z06 |
|
DIN EN ISO 105-Z07 |
Tests for colour fastness of textiles - Part Z07: Determination of application solubility and solution stability of water-soluble dyes (ISO 105-Z07:1995) |
|
DIN EN ISO 105-Z08 |
Tests for colour fastness of textiles - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105-Z08:1995) |
|
DIN EN ISO 105-Z10 |
Textiles - Tests for colour fastness - Part Z10: Determination of relative colour strength of dyes in solution (ISO 105-Z10:1997) |
|
DIN EN ISO 105-Z11 |
Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of colorant dispersions (ISO 105-Z11:1998); English version of DIN EN ISO 105-Z11 |
|
DIN EN ISO 10618 |
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
|
DIN EN ISO 10821 |
Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
|
DIN EN ISO 11058 |
Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999) |
|
DIN EN ISO 11111-1 |
Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2005) |
|
DIN EN ISO 11111-2 |
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
|
DIN EN ISO 11111-3 |
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) |
|
DIN EN ISO 11111-4 |
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
|
DIN EN ISO 11111-5 |
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
|
DIN EN ISO 11111-6 |
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
|
DIN EN ISO 11111-7 |
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
|
DIN EN ISO 1140 |
Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes (ISO 1140:2004) |
|
DIN EN ISO 1141 |
Fibre ropes - Polyester - 3-, 4- and 8-strand ropes (ISO 1141:2004) |
|
DIN EN ISO 11640 |
Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993) |
|
DIN EN ISO 11641 |
Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993) |
|
DIN EN ISO 11643 |
Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions (ISO 11643:1993) |
|
DIN EN ISO 11644 |
Leather - Test for adhesion of finish (ISO 11644:1993) |
|
DIN EN ISO 11646 |
Leather - Measurement of area (ISO 11646:1993) |
|
DIN EN ISO 11683 |
Tactile warnings of danger on packaging - Requirements (ISO 11683:1997) |
|
DIN EN ISO 11721-1 |
Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); English version of DIN EN ISO 11721-1 |
|
DIN EN ISO 11721-2 |
Textiles - Determination of the resistance of cellulose containing textiles to micro-organisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003) |
|
DIN EN ISO 1181 |
Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes (ISO 1181:2004) |
|
DIN EN ISO 11857 |
Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999) |
|
DIN EN ISO 11897 |
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); English version of DIN EN ISO 11897 |
|
DIN EN ISO 12048 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); English version of DIN EN ISO 12048 |
|
DIN EN ISO 12138 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996); German version EN ISO 12138:1996 |
|
DIN EN ISO 12236 |
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
|
DIN EN ISO 12777-1 |
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994); German version EN ISO 12777-1:1996 |
|
DIN EN ISO 12777-2 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000); English version of DIN EN ISO 12777-2 |
|
DIN EN ISO 12777-3 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
|
DIN EN ISO 12947-2 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
|
DIN EN ISO 12947-3 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
|
DIN EN ISO 12947-4 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
|
DIN EN ISO 12956 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999) |
|
DIN EN ISO 12957-1 |
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005) |
|
DIN EN ISO 12957-2 |
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) |
|
DIN EN ISO 12958 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999) |
|
DIN EN ISO 13002 |
Carbon fibre - Designation system for filament yarns (ISO 13002:1998) |
|
DIN EN ISO 13355 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001) |
|
DIN EN ISO 13426-1 |
Geotextiles and geotexile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
|
DIN EN ISO 13426-2 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
|
DIN EN ISO 13427 |
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998) |
|
DIN EN ISO 13428 |
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) |
|
DIN EN ISO 13431 |
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
|
DIN EN ISO 13433 |
Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
|
DIN EN ISO 13438 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004) |
|
DIN EN ISO 1346 |
Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes (ISO 1346:2004) |
|
DIN EN ISO 139 |
Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005) |
|
DIN EN ISO 13938-2 |
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
|
DIN EN ISO 1421 |
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998) |
|
DIN EN ISO 14268 |
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2002) |
|
DIN EN ISO 14419 Berichtigung 1 |
Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998), Corrigendum 1 to DIN EN ISO 14419:1999-12 |
|
DIN EN ISO 14931 |
Leather - Guide to the selection of leather for apparel (excluding furs) (ISO 14931:2004) |
|
DIN EN ISO 15119 |
Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000) |
|
DIN EN ISO 15700 |
Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
|
DIN EN ISO 15702 |
Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998) |
|
DIN EN ISO 15703 |
Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
|
DIN EN ISO 15797 |
Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002) |
|
DIN EN ISO 15797 Berichtigung 1 |
Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002); Corrigenda to EN ISO 15797:2004 |
|
DIN EN ISO 15831 |
Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
|
DIN EN ISO 15867 |
Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003) |
|
DIN EN ISO 16101 |
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004) |
|
DIN EN ISO 16103 |
Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005) |
|
DIN EN ISO 16104 |
Packaging - Transport packaging for dangerous goods - Tests methods (ISO 16104:2003) |
|
DIN EN ISO 16106 |
Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006) |
|
DIN EN ISO 16467 |
Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003) |
|
DIN EN ISO 17186 |
Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2002) |
|
DIN EN ISO 17227 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather (ISO 17227:2002) |
|
DIN EN ISO 17228 |
Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2005) |
|
DIN EN ISO 17229 |
Leather - Physical and mechanical tests - Determination of water vapour absorption (ISO 17229:2002) |
|
DIN EN ISO 17235 |
Leather - Physical and mechanical tests - Determination of softness (ISO 17235:2002) |
|
DIN EN ISO 17236 |
Leather - Physical and mechanical tests - Determination of extension set (ISO 17236:2002) |
|
DIN EN ISO 17693 |
Footwear - Test methods for uppers - Resistance to damage on lasting (ISO 17693:2004) |
|
DIN EN ISO 17695 |
Footwear - Test methods for uppers - Deformability (ISO 17695:2004) |
|
DIN EN ISO 17700 |
Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004) |
|
DIN EN ISO 17707 |
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005) |
|
DIN EN ISO 17708 |
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) |
|
DIN EN ISO 18613 |
Repair of flat wooden pallets (ISO 18613:2003) |
|
DIN EN ISO 1886 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990) |
|
DIN EN ISO 1889 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997) |
|
DIN EN ISO 1890 |
Reinforcement yarns - Determination of twist (ISO 1890:1997) |
|
DIN EN ISO 1968 |
Fibre ropes and cordage - Vocabulary (ISO 1968:2004); Trilingual version EN ISO 1968:2004 |
|
DIN EN ISO 1969 |
Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004) |
|
DIN EN ISO 1973 |
Textile fibres - Determination of linear density by gravimetry and the vibroscope method (ISO 1973:1995) |
|
DIN EN ISO 19952 |
Footwear - Vocabulary (ISO 19952:2005); Trilingual version EN ISO 19952:2005 |
|
DIN EN ISO 19953 |
Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004) |
|
DIN EN ISO 19954 |
Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
|
DIN EN ISO 19956 |
Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004) |
|
DIN EN ISO 19957 |
Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2004) |
|
DIN EN ISO 19958 |
Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO 19958:2004) |
|
DIN EN ISO 20645 |
Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test (ISO 20645:2004) |
|
DIN EN ISO 2078 |
Textile glass yarns - Designation (ISO 2078:1993) |
|
DIN EN ISO 20863 |
Footwear - Test method for stiffeners and toepuffs - Bondability (ISO 20863:2004) |
|
DIN EN ISO 20864 |
Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics (ISO 20864:2004) |
|
DIN EN ISO 21898 |
Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004) |
|
DIN EN ISO 2231 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
|
DIN EN ISO 2233 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000); English version of DIN EN ISO 2233 |
|
DIN EN ISO 2234 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
|
DIN EN ISO 2244 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
|
DIN EN ISO 2247 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
|
DIN EN ISO 22774 |
Footwear - Test methods for accessories: shoe laces - Abrasion resistance (ISO 22774:2004) |
|
DIN EN ISO 22775 |
Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004) |
|
DIN EN ISO 22776 |
Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004) |
|
DIN EN ISO 22777 |
Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004) |
|
DIN EN ISO 2286-1 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998) |
|
DIN EN ISO 2286-2 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) |
|
DIN EN ISO 2286-3 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998) |
|
DIN EN ISO 2307 |
Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2005) |
|
DIN EN ISO 2411 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000); English version of DIN EN ISO 2411 |
|
DIN EN ISO 2417 |
Leather - Physical and mechanical tests - Determination of static absorption of water (ISO 2417:2002) |
|
DIN EN ISO 2418 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) |
|
DIN EN ISO 2419 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2006) |
|
DIN EN ISO 2419 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2006) |
|
DIN EN ISO 2419 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2006) |
|
DIN EN ISO 2420 |
Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) |
|
DIN EN ISO 2589 |
Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2002) |
|
DIN EN ISO 2873 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000) |
|
DIN EN ISO 2875 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000) |
|
DIN EN ISO 3175-1 |
Textiles - Dry cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998) |
|
DIN EN ISO 3175-2 |
Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998) |
|
DIN EN ISO 3175-4 |
Textiles - Professional care, dry-cleaning and wet-cleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003) |
|
DIN EN ISO 3344 |
Reinforcement products - Determination of moisture content (ISO 3344:1997) |
|
DIN EN ISO 3376 |
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002) |
|
DIN EN ISO 3377-2 |
Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2002) |
|
DIN EN ISO 3378 |
Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index (ISO 3378:2002) |
|
DIN EN ISO 3380 |
Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2002) |
|
DIN EN ISO 3758 |
Textiles - Care labelling code using symbols (ISO 3758:2005) |
|
DIN EN ISO 4045 |
Leather - Determination of pH (ISO 4045:1977) |
|
DIN EN ISO 4047 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977) |
|
DIN EN ISO 4048 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977) |
|
DIN EN ISO 4674-1 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003) |
|
DIN EN ISO 4674-2 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
|
DIN EN ISO 4684 |
Leather - Chemical tests - Determination of volatile matter (ISO 4684:2005) |
|
DIN EN ISO 5079 |
Textile fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1995) |
|
DIN EN ISO 5080 |
Sisal agricultural (ISO 5080:1994) |
|
DIN EN ISO 5399 |
Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984) |
|
DIN EN ISO 5403 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leather (ISO 5403:2002) |
|
DIN EN ISO 5404 |
Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers (ISO 5404:2002) |
|
DIN EN ISO 5470-1 |
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999) |
|
DIN EN ISO 5470-2 |
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003) |
|
DIN EN ISO 5981 |
Determination of resistance of rubber- or plastics-coated fabrics to combined shear flexing and rubbing (ISO 5981:1997) |
|
DIN EN ISO 6179 |
Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); English version of DIN EN ISO 6179 |
|
DIN EN ISO 6346 |
Freight containers - Coding, identification and marking (ISO 6346:1995) |
|
DIN EN ISO 6940 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:2004) |
|
DIN EN ISO 6941 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003) |
|
DIN EN ISO 7458 |
Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004) |
|
DIN EN ISO 7459 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004) |
|
DIN EN ISO 7854 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
|
DIN EN ISO 7965-2 |
Drop testing of sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993) |
|
DIN EN ISO 8106 |
Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004) |
|
DIN EN ISO 8113 |
Glass containers - Resistance to vertical load - Test method (ISO 8113:2004) |
|
DIN EN ISO 8317 |
Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003) |
|
DIN EN ISO 8318 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000) |
|
DIN EN ISO 8351-1 |
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994) |
|
DIN EN ISO 8351-2 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994) |
|
DIN EN ISO 8367-1 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993) |
|
DIN EN ISO 8367-2 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993) |
|
DIN EN ISO 8388 |
Knitted fabrics - Types - Vocabulary (ISO 8388:1998) |