|
DIN EN 12289 |
Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties |
|
DIN EN 12290 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
|
DIN EN 12291 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties |
|
DIN EN 12301 |
Rubber and plastics machines - Calenders - Safety requirements; English version of DIN EN 12301 |
|
DIN EN 1230-1 |
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour; English version of DIN EN 1230-1 |
|
DIN EN 1230-2 |
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint); English version of DIN EN 1230-2 |
|
DIN EN 12337-1 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; English version of DIN EN 12337-1 |
|
DIN EN 12337-2 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
|
DIN EN 1238 |
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
|
DIN EN 1239 |
Adhesives - Freeze-thaw stability |
|
DIN EN 1240 |
Adhesives - Determination of hydroxyl value and/or hydroxyl content |
|
DIN EN 12409 |
Rubber and plastics machines - Thermoforming machines - Safety requirements |
|
DIN EN 1241 |
Adhesives - Determination of acid value |
|
DIN EN 1242 |
Adhesives - Determination of isocyanate content |
|
DIN EN 1243 |
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
|
DIN EN 12436 |
Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements; English version of DIN EN 12436 |
|
DIN EN 1244 |
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
|
DIN EN 1245 |
Adhesives - Determination of pH - Test method |
|
DIN EN 1246 |
Adhesives - Determination of ash and sulphated ash |
|
DIN EN 12475-4 |
Classification of dense shaped refractory products - Part 4: Special products |
|
DIN EN 12481 |
Adhesive tapes - Terminology; English version of DIN EN 12481 |
|
DIN EN 12497 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract |
|
DIN EN 12498 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract |
|
DIN EN 12576 |
Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC |
|
DIN EN 12600 |
Glass in building - Pendulum tests - Impact test method and classification for flat glass |
|
DIN EN 12608 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
|
DIN EN 12613 |
Plastics warning devices with visual characteristics for underground cables and pipelines; English version of DIN EN 12613 |
|
DIN EN 12702 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; English version of DIN EN 12702 |
|
DIN EN 12703 |
Adhesives for paper and board, packaging and disposable sanitary products -Determination of low temperature flexibility or cold crack temperature |
|
DIN EN 12704 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation of aqueous adhesives |
|
DIN EN 12705 |
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
|
DIN EN 12758 |
Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
|
DIN EN 12765 |
Classification of thermosetting wood adhesives for non-structural applications; English version of DIN EN 12765 |
|
DIN EN 12788 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
|
DIN EN 12789 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
|
DIN EN 1279-1 |
Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description |
|
DIN EN 1279-3 |
Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
|
DIN EN 1279-4 |
Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
|
DIN EN 1279-5 |
Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
|
DIN EN 1279-6 |
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
|
DIN EN 12808-1 |
Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
|
DIN EN 12858 |
Paper - Printing and business paper - Requirements for continuous stationery |
|
DIN EN 12860 |
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods |
|
DIN EN 12877-1 |
Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction |
|
DIN EN 12877-2 |
Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding |
|
DIN EN 12877-3 |
Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test |
|
DIN EN 12877-4 |
Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling |
|
DIN EN 1288-1 |
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; English version of DIN EN 1288-1 |
|
DIN EN 1288-2 |
Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; English version of DIN EN 1288-2 |
|
DIN EN 1288-3 |
Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); English version of DIN EN 1288-3 |
|
DIN EN 1288-4 |
Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; English version of DIN EN 1288-4 |
|
DIN EN 1288-5 |
Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; English version of DIN EN 1288-5 |
|
DIN EN 12923-1 |
Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
|
DIN EN 12960 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; English version of DIN EN 12960 |
|
DIN EN 12961 |
Adhesives for leather and footwear materials - Determination of optimum activation temperature and maximum activation life of solvent-based and dispersion adhesives; English version of DIN EN 12961 |
|
DIN EN 12962 |
Adhesives - Determination of elastic behaviour of liquid adhesives ( |
|
DIN EN 12963 |
Adhesives - Determination of free monomer content of adhesives based on synthetic polymers; English version of DIN EN 12963 |
|
DIN EN 12964 |
Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature; English version of DIN EN 12964 |
|
DIN EN 13022-1 |
Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
|
DIN EN 13022-2 |
Glass in building - Structural sealant glazing - Part 2: Assembly rules |
|
DIN EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
|
DIN EN 13024-1 |
Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description |
|
DIN EN 13024-2 |
Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard |
|
DIN EN 13035-3 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
|
DIN EN 13035-4 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
|
DIN EN 13035-5 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
|
DIN EN 13035-6 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break out |
|
DIN EN 13035-7 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
|
DIN EN 13042-2 |
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
|
DIN EN 1308 |
Adhesives for tiles - Determination of slip (includes Amendment A1:1998) |
|
DIN EN 13100-3 |
Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
|
DIN EN 13102 |
Ceramic machines - Safety - Loading and unloading of fine clay tiles |
|
DIN EN 13206 |
Covering thermoplastic films for use in agriculture and horticulture; English version of DIN EN 13206 |
|
DIN EN 13207 |
Silage thermoplastic films; English version of DIN EN 13207 |
|
DIN EN 13234 |
Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing |
|
DIN EN 13235 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
|
DIN EN 1324 |
Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives (includes Amendment A1:1998) |
|
DIN EN 13245-1 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles |
|
DIN EN 13367 |
Ceramic machines - Safety - Transfer platforms and cars |
|
DIN EN 13415 |
Adhesives - Test of adhesives for floor coverings - Determination of the electrical resistance of adhesive films |
|
DIN EN 13418 |
Rubber and plastics machines - Winding machines for film or sheet - Safety requirements |
|
DIN EN 13421 |
Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
|
DIN EN 1346 |
Adhesives for tiles - Determination of open time (includes Amendment A1:1998) |
|
DIN EN 1347 |
Adhesives for tiles - Determination of wetting capability (includes Amendment A1:1998) |
|
DIN EN 13473-1 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; English version of DIN EN 13473-1 |
|
DIN EN 13473-2 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; English version of DIN EN 13473-2 |
|
DIN EN 13473-3 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; English version of DIN EN 13473-3 |
|
DIN EN 1348 |
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives (includes Amendment A1:1998) |
|
DIN EN 13541 |
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; English version of DIN EN 13541 |
|
DIN EN 13655 |
Plastics - Mulching thermoplastic films for use in agriculture and horticulture |
|
DIN EN 13677-1 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
|
DIN EN 13677-3 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
|
DIN EN 13706-1 |
Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation |
|
DIN EN 13706-2 |
Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
|
DIN EN 13706-3 |
Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements |
|
DIN EN 1372 |
Test method for adhesives for floor and wall coverings - Peel test |
|
DIN EN 1373 |
Test method for adhesives for floor and wall coverings - Shear test |
|
DIN EN 13787 |
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
|
DIN EN 13887 |
Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
|
DIN EN 1389 |
Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
|
DIN EN 13900-1 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction |
|
DIN EN 13900-2 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
|
DIN EN 13900-3 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
|
DIN EN 13900-4 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling |
|
DIN EN 13900-5 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test |
|
DIN EN 1391 |
Adhesives for leather and footwear materials - Method for evaluating the bondability of materials - Minimum requirements and material classification |
|
DIN EN 1392 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
|
DIN EN 13999-1 |
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
|
DIN EN 1402-1 |
Unshaped refractory products - Part 1: Introduction and classification |
|
DIN EN 1402-2 |
Unshaped refractory products - Part 2: Sampling for testing |
|
DIN EN 1402-3 |
Unshaped refractory products - Part 3: Characterization as received |
|
DIN EN 1402-4 |
Unshaped refractory products - Part 4: Determination of consistency of castables |
|
DIN EN 1402-5 |
Unshaped refractory products - Part 5: Preparation and treatment of test pieces |
|
DIN EN 1402-6 |
Unshaped refractory products - Part 6: Measurement of physical properties |
|
DIN EN 1402-7 |
Unshaped refractory materials - Part 7: Tests on pre-formed shapes |
|
DIN EN 1402-8 |
Unshaped refractory products - Part 8: Determination of complementary properties |
|
DIN EN 14072 |
Glass in furniture - Test methods |
|
DIN EN 14086 |
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam (DIN method) |
|
DIN EN 1417 |
Rubber and plastics machines - Two roll mills - Safety requirements; German version EN 1417:1996 |
|
DIN EN 14178-1 |
Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
|
DIN EN 14178-2 |
Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard |
|
DIN EN 14179-1 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
|
DIN EN 14179-2 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
|
DIN EN 14233 |
Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing |
|
DIN EN 14241-1 |
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
|
DIN EN 14243 |
(DRAFT) Post-consumer tyre - Materials and applications; English version prEN 14243:2004 |
|
DIN EN 14257 |
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) |
|
DIN EN 14258 |
Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
|
DIN EN 14259 |
Adhesives for floor coverings - Requirements for mechanical and electrical performance |
|
DIN EN 14292 |
Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
|
DIN EN 14293 |
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
|
DIN EN 14294 |
Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
|
DIN EN 14321-1 |
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description |
|
DIN EN 14410 |
Self-adhesive tapes - Measurement of breaking strength and elongation at break |
|
DIN EN 14444 |
Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) |
|
DIN EN 14447 |
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
|
DIN EN 14449 |
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
|
DIN EN 14469-1 |
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures |
|
DIN EN 14469-2 |
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens |
|
DIN EN 14469-3 |
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments |
|
DIN EN 14469-4 |
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials |
|
DIN EN 14481 |
Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact |
|
DIN EN 14510 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
|
DIN EN 14598-1 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
|
DIN EN 14598-2 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
|
DIN EN 14598-3 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
|
DIN EN 1464 |
Adhesives - Determination of peel resistance of high-strength adhesive bonds by the floating roller method (ISO 4578:1990, modified) |
|
DIN EN 1465 |
Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies (ISO 4587:1979, modified) |
|
DIN EN 14680 |
Adhesives for non-pressure thermoplastic piping systems - Specifications |
|
DIN EN 14713 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
|
DIN EN 14719 |
Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
|
DIN EN 14869-2 |
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
|
DIN EN 14932 |
Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods |
|
DIN EN 14945 |
Refractory products and materials - Spectrometric determination of chromium(VI) in chrome bearing refractories, before and after use |
|
DIN EN 14963 |
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
|
DIN EN 14995 |
Plastics - Evaluation of compostability - Test scheme and specifications |
|
DIN EN 15062 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
|
DIN EN 15157 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude English version of EN 15157:2006 |
|
DIN EN 15158 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
|
DIN EN 15336 |
Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified) |
|
DIN EN 15416-4 |
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives |
|
DIN EN 15416-5 |
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time |
|
DIN EN 15434 |
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
|
DIN EN 1595 |
Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing |
|
DIN EN 1612-1 |
Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units |
|
DIN EN 1612-2 |
Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; English version DIN EN 1612-2 |
|
DIN EN 1719 |
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack |
|
DIN EN 1720 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
|
DIN EN 1721 |
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of rolling ball tack |
|
DIN EN 1748-1-2 |
Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
|
DIN EN 1748-2-2 |
Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard |
|
DIN EN 1778 |
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment |
|
DIN EN 1841 |
Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
|
DIN EN 1842 |
Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage |
|
DIN EN 1863-1 |
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description; English version of DIN EN 1863-1 |
|
DIN EN 1863-2 |
Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
|
DIN EN 1892 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
|
DIN EN 1893 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
|
DIN EN 1894 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
|
DIN EN 1895 |
Adhesives for paper and board, packaging and disposable sanitary products - 180° |
|
DIN EN 1896 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; English version of DIN EN 1896 |
|
DIN EN 1902 |
Test method for adhesives for floor coverings and wall coverings - Shear creep test |
|
DIN EN 1903 |
Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
|
DIN EN 1939 |
Self-adhesive tapes - Determination of peel adhesion properties |
|
DIN EN 1942 |
Self adhesive tapes - Measurement of thickness |
|
DIN EN 1943 |
Self-adhesive tapes - Measurement of static shear adhesion |
|
DIN EN 1944 |
Self-adhesive tapes - Measurement of unwind adhesion at low speed |
|
DIN EN 1945 |
Self-adhesive tapes - Measurement of quick stick |
|
DIN EN 1965-1 |
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate; English version of DIN EN 1965-1 |
|
DIN EN 1965-2 |
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate; English version of DIN EN 1965-2 |
|
DIN EN 1966 |
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
|
DIN EN 1967 |
Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
|
DIN EN 201 |
Rubber and plastics machines - Injection moulding machines - Safety requirements; German version EN 201:1997 |
|
DIN EN 201/A1 |
Rubber and plastics machines - Injection moulding machines - Safety requirements; English version of DIN EN 201:1997/A1:2000 |
|
DIN EN 201/A2 |
Plastics and rubber machines - Injection moulding machines - Safety requirements |
|
DIN EN 20187 |
Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993 |
|
DIN EN 20287 |
Paper and board - Determination of moisture content by the oven-drying method (ISO 287:1985) |
|
DIN EN 204 |
Classification of thermoplastic wood adhesives for non-structural applications; English version of DIN EN 204 |
|
DIN EN 205 |
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
|
DIN EN 20535 |
Paper and board - Determination of water absorptiveness by the Cobb method (ISO 535:1991) |
|
DIN EN 20638 |
Pulps; determination of dry matter content (ISO 638:1978); German version EN 20638:1993 |
|
DIN EN 21974 |
Determination of tearing resistance of paper (Elmendorf method) (ISO 1974:1990) |
|
DIN EN 23035 |
Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982) |
|
DIN EN 25651 |
Paper, board and pulps; units for expressing properties (ISO 5651:1989); German version EN 25651:1993 |
|
DIN EN 263 |
Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
|
DIN EN 26922 |
Adhesives; determination of tensile strength of butt joints (ISO 6922:1987); German version EN 26922:1993 |
|
DIN EN 27213 |
Pulps; sampling for testing (ISO 7213:1981); German version EN 7213:1993 |
|
DIN EN 28510-1 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90° peel (ISO 8510-1:1990); German version EN 28510-1:1993 |
|
DIN EN 28510-2 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 2: 180° peel (ISO 8510-2:1990); German version EN 28510-2:1993 |
|
DIN EN 289 |
Plastics and rubber machines - Presses - Safety requirements |
|
DIN EN 301 |
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
|
DIN EN 302-1 |
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear |
|
DIN EN 302-2 |
Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination |
|
DIN EN 302-3 |
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
|
DIN EN 302-4 |
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
|
DIN EN 302-6 |
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time |
|
DIN EN 302-7 |
Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life |
|
DIN EN 356 |
Glass in building - Security glazing - Testing and classification of resistance against manual attack; English version of DIN EN 356 |
|
DIN EN 357 |
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
|
DIN EN 40-7 |
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns |
|
DIN EN 410 |
Glass in building - Determination of luminous and solar characteristics of glazing |
|
DIN EN 422 |
Safety of rubber and plastics machines - Blow moulding machines intended for the production of hollow articles - Requirements for design and construction |
|
DIN EN 438-2 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
|
DIN EN 438-3 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
|
DIN EN 438-4 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
|
DIN EN 438-6 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater |
|
DIN EN 438-7 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
|
DIN EN 477 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass |
|
DIN EN 478 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of appearance after exposure at 150 °C |
|
DIN EN 479 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion |
|
DIN EN 513 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
|
DIN EN 514 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints; English version of DIN EN 514 |
|
DIN EN 542 |
Adhesives - Determination of density |
|
DIN EN 543 |
Adhesives - Determination of apparent density of powder and granule adhesives |
|
DIN EN 572-1 |
Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
|
DIN EN 572-2 |
Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
|
DIN EN 572-3 |
Glass in building - Basic soda lime silicate glass products - Part 3: Polished wire glass |
|
DIN EN 572-4 |
Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass |
|
DIN EN 572-5 |
Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass |
|
DIN EN 572-6 |
Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass |
|
DIN EN 572-7 |
Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass |
|
DIN EN 572-8 |
Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes |
|
DIN EN 572-9 |
Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
|
DIN EN 623-1 |
Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration |
|
DIN EN 623-2 |
Advanced technical ceramics; monolithic ceramics; general and textural properties; determination of density and porosity |
|
DIN EN 623-3 |
Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method) |
|
DIN EN 623-4 |
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness |
|
DIN EN 643 |
Paper and board - European list of standard grades of recovered paper and board; English version of DIN EN 643 |
|
DIN EN 644 |
Paper - Untrimmed sizes - Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
|
DIN EN 645 |
Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract |
|
DIN EN 646 |
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
|
DIN EN 647 |
Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract |
|
DIN EN 648 |
Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board |
|
DIN EN 658-1 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties |
|
DIN EN 658-2 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties |
|
DIN EN 658-3 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength |
|
DIN EN 658-4 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens |
|
DIN EN 658-5 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points) |
|
DIN EN 673 |
Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000 + A2:2002) |
|
DIN EN 674 |
Glass in building - Determination of thermal transmittance (U value) by the guarded hot plate method |
|
DIN EN 675 |
Glass in building - Determination of thermal transmittance (U value) by the heat flow meter method |
|
DIN EN 725-1 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
|
DIN EN 725-11 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination on natural sintering |
|
DIN EN 725-12 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia; English version of DIN EN 725-12 |
|
DIN EN 725-3 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
|
DIN EN 725-4 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis |
|
DIN EN 725-5 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution |
|
DIN EN 725-8 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
|
DIN EN 725-9 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density |
|
DIN EN 820-1 |
Advanced technical ceramics - Monolithic ceramics; Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
|
DIN EN 820-2 |
Advanced technical ceramics - Monolithic ceramics - Thermomechanical properties - Part 2: Determination of self-loaded deformation |
|
DIN EN 820-3 |
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
|
DIN EN 821-1 |
Monolithic ceramics - Thermophysical properties - Determination of thermal expansion |
|
DIN EN 821-2 |
Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
|
DIN EN 821-3 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity |
|
DIN EN 827 |
Adhesives - Determination of conventional solids content and constant mass solids content |
|
DIN EN 828 |
Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surfaces |
|
DIN EN 843-1 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
|
DIN EN 843-2 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
|
DIN EN 843-3 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
|
DIN EN 843-5 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
|
DIN EN 920 |
Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract; English version of DIN EN 920 |
|
DIN EN 923 |
Adhesives - Terms and definitions |
|
DIN EN 924 |
Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
|
DIN EN 993-1 |
Methods of test for dense shaped refractory products - Determination of bulk density, apparent porosity and true porosity |
|
DIN EN 993-13 |
Methods of test for dense shaped refractory products - Specification for pyrometric reference cones for laboratory use |
|
DIN EN 993-15 |
Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method |
|
DIN EN 993-16 |
Methods of test for dense shaped refractory products - Determination of resistance to sulfuric acid |
|
DIN EN 993-17 |
Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum |
|
DIN EN 993-18 |
Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vakuum |
|
DIN EN 993-19 |
Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method |
|
DIN EN 993-2/A1 |
Methods of test for dense shaped refractory products - Part 2: Determination of true density |
|
DIN EN 993-20 |
Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature |
|
DIN EN 993-3 |
Methods of testing dense shaped refractory products - Part 3: Test methods for carbon-containing refractories |
|
DIN EN 993-4 |
Methods of test for dense shaped refractory products - Determination of permeability to gases |
|
DIN EN 993-5 |
Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength |
|
DIN EN 993-6 |
Methods of test for dense shaped refractory products - Determination of modulus of rupture at ambient temperature |
|
DIN EN 993-8 |
Methods of testing dense shaped refractory products - Part 8: Determination of refractoriness-under-load |
|
DIN EN ISO 10066 |
Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991) |
|
DIN EN ISO 10081-1 |
Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003) |