|
DIN ISO 11093-3 |
Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven-dry method (ISO 11093-3:1994) |
|
DIN ISO 11093-4 |
Paper and board - Testing of cores - Part 4: Measurement of dimensions (ISO 11093-4:1997) |
|
DIN ISO 11093-5 |
Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation (ISO 11093-5:1994) |
|
DIN ISO 11093-6 |
Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005) |
|
DIN ISO 11093-7 |
Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:1997) |
|
DIN ISO 11093-8 |
Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:1997) |
|
DIN ISO 11093-9 |
Paper and board - Testing of cores - Part 9: Determination of flat crush resistance (ISO 11093-9:1994) |
|
DIN ISO 11093-9 |
Paper and board - Testing of cores - Part 9: Determination of flat crush resistance (ISO 11093-9:2006) |
|
DIN ISO 11234 |
Rubber compounding ingredients - Carbon black (pelletized) - Determination of dust content (ISO 11234:1995) |
|
DIN ISO 11235 |
Rubber compounding ingredients - Sulfenamide accelerators - Test methods (ISO 11235:1999) |
|
DIN ISO 11752 |
Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts (ISO 11752:2000) |
|
DIN ISO 126 |
Latex, rubber, natural concentrate - Determination of dry rubber content (ISO 126:1995) |
|
DIN ISO 1306 |
Rubber compounding ingredients - Carbon black (pelletized) - Determination of pour density (ISO 1306:1995) |
|
DIN ISO 132 |
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:1999) |
|
DIN ISO 13226 |
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2005) |
|
DIN ISO 13741-1 |
Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injection method (ISO 13741-1:1998) |
|
DIN ISO 13741-2 |
Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method (ISO 13741-2:1998) |
|
DIN ISO 13773 |
Rubber - Polychloroprene latex - Determination of alkalinity (ISO 13773:1997) |
|
DIN ISO 1409 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method (ISO 1409:1995) |
|
DIN ISO 14359 |
Winter-sports equipment - Marking of parts made of polymer materials (ISO 14359:1997) |
|
DIN ISO 1802 |
Natural rubber latex concentrate - Determination of boric acid content (ISO 1802:1992) |
|
DIN ISO 2004 |
Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications (ISO 2004:1997) |
|
DIN ISO 2006 |
Rubber latex, synthetic - Determination of high-speed mechanical stability (ISO 2006:1985) |
|
DIN ISO 2006 |
Rubber latex, synthetic - Determination of high-speed mechanical stability (ISO 2006:1985) |
|
DIN ISO 2006 |
Rubber latex, synthetic - Determination of high-speed mechanical stability (ISO 2006:1985) |
|
DIN ISO 2027 |
Evaporated, preserved natural rubber latex concentrate - Specifications (ISO 2027:1990) |
|
DIN ISO 2028 |
Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999) |
|
DIN ISO 2115 |
Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996) |
|
DIN ISO 23529 |
Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2004) |
|
DIN ISO 35 |
Natural rubber latex concentrate - Determination of mechanical stability (ISO 35:1995) |
|
DIN ISO 3585 |
Borosilicate glass 3.3 - Properties (ISO 3585:1998) |
|
DIN ISO 4576 |
Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996) |
|
DIN ISO 4655 |
Rubber - Reinforced styrene-butadiene latex - Determination of total bound styrene content (ISO 4655:1985) |
|
DIN ISO 498 |
Natural rubber latex concentrate - Preparation of dry films (ISO 498:1992) |
|
DIN ISO 5630-3 |
Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 xC and 65 % relative humidity (ISO 5630-3:1996) |
|
DIN ISO 5834-2 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 2: Moulded forms (ISO 5834-2:1998) |
|
DIN ISO 6133 |
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:1998) |
|
DIN ISO 6474 |
Implants for surgery - Ceramic materials based on high purity alumina (ISO 6474:1994) |
|
DIN ISO 705 |
Rubber latex - Determination of density between 5 °C and 40 °C (ISO 705:1994) |
|
DIN ISO 706 |
Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004) |
|
DIN ISO 706 |
Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004) |
|
DIN ISO 706 |
Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004) |
|
DIN ISO 7743 |
Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004) |
|
DIN ISO 7884-1 |
Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987) |
|
DIN ISO 7884-2 |
Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987) |
|
DIN ISO 7884-3 |
Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) |
|
DIN ISO 7884-4 |
Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987) |
|
DIN ISO 7884-5 |
Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987) |
|
DIN ISO 7884-6 |
Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point (ISO 7884-6:1987) |
|
DIN ISO 7884-7 |
Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987) |
|
DIN ISO 7884-8 |
Glass - Viscosity and viscometric fixed points - Part 8: Determination of (dilatometric) transformation temperature (ISO 7884-8:1987) |
|
DIN ISO 812 |
Rubber, vulcanized - Determination of low-temperature brittleness (ISO 812:1991) |
|
DIN ISO 813 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method (ISO 813:1997) |
|
DIN ISO 815 |
Vulcanized and thermoplastic rubber - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + Technical Cororigendum 1:1993) |
|
DIN ISO 8226-1 |
Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % (ISO 8226-1:1994) |
|
DIN ISO 8296 |
Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003) |
|
DIN ISO 8791-4 |
Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:1992) |
|
DIN ISO 9252 |
Synthetic rubber latex - Microbiological examination (ISO 9252:1989) |
|
DIN ISO 976 |
Rubber and plastics - Polymer dispersions and rubber latices - Determination of pH (ISO 976:1996) |
|
DIN V ENV 14232 |
Advanced technical ceramics - Terms, definitions and abbreviations; Trilingual version ENV 14232:2003 |