|
DIN EN ISO 7369 |
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 |
|
DIN EN ISO 7711-3 |
Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
|
DIN EN ISO 772/A2 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 2:2004) |
|
DIN EN ISO 7998 |
Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary (ISO 7998:2005) |
|
DIN EN ISO 8044 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999 |
|
DIN EN ISO 8092-2 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) |
|
DIN EN ISO 8130-14 |
Coating powders - Part 14: Terminology (ISO 8130-14:2004); Trilingual version EN ISO 8130-14:2004 |
|
DIN EN ISO 8330 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); English version of DIN EN ISO 8330 |
|
DIN EN ISO 8373 |
Manipulating industrial robots - Vocabulary (ISO 8373:1994) |
|
DIN EN ISO 8384 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000); Trilingual version EN ISO 8384:2001 |
|
DIN EN ISO 8388 |
Knitted fabrics - Types - Vocabulary (ISO 8388:1998) |
|
DIN EN ISO 862 |
Surface active agents - Vocabulary (ISO 862:1984, including Corrigendum 1:1993) |
|
DIN EN ISO 8655-1 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002) |
|
DIN EN ISO 90-1 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
|
DIN EN ISO 90-2 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General-use containers (ISO 90-2:1997) |
|
DIN EN ISO 90-3 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); English version of DIN EN ISO 90-3 |
|
DIN EN ISO 9229 |
(DRAFT) Thermal insulation - Definitions of terms (ISO/DIS 9229:1997); Trilingual version prEN ISO 9229:1997 |
|
DIN EN ISO 9251 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
|
DIN EN ISO 9288 |
Thermal insulation - Heat transfer by radiation: Physical quantities and definitions (ISO 9288:1989) |
|
DIN EN ISO 9346 |
Thermal insulation - Mass transfer: Physical quantities and definitions (ISO 9346:1987) |
|
DIN EN ISO 9488 |
Solar energy - Vocabulary (ISO 9488:1999); Trilingual version EN ISO 9488:1999 |
|
DIN EN ISO 9687 |
Dental equipment - Graphical symbols (ISO 9687:1993) |
|
DIN EN ISO 9687 |
Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995 |
|
DIN EN ISO/IEC 17011 |
Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004); German and English version EN ISO/IEC 17011:2004 |
|
DIN EN ISO/IEC 17024 |
Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC 17024:2003); German and English version EN ISO/IEC 17024:2003 |
|
DIN EN ISO/IEC 17050-1 |
Conformity assessment - Supplier´s declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004); German and English version EN ISO/IEC 17050-1:2004 |
|
DIN EN ISO/IEC 17050-2 |
Conformity assessment - Supplier´s declaration of conformity - Part 2: Supporting documentation (ISO/IEC 17050-2:2004); German and English version EN ISO/IEC 17050-2:2004 |
|
DIN EN ISO/IEC 7810 |
Identification cards - Physical characteristics (ISO/IEC 7810:1995) |
|
DIN ETS 300119-1 |
Equipment engineering (EE) - European telecommunication standard for equipment practice - Part 1: Introduction and terminology; English version ETS 300119-1:1994 |
|
DIN ETS 300415 |
Private Integrated Sevice Network (PISN) - Terms and definitions; English version ETS 300415:1996 |
|
DIN ETS 300498-1 |
Open Document Architecture (ODA) - ODA communication services - Part 1: Basic services; English version ETS 300498-1:1996 |
|
DIN ETS 300767 |
Human Factors (HF) - Telephone Prepayment Cards - Tactile Identifier; English version ETS 300767:1997 |
|
DIN ETS 300777-1 |
Terminal Equipment (TE) - End-to-end protocols for multimedia information retrieval services - Part 1: Coding of multimedia and hypermedia information for basic multimedia applications (MHEG-5); English version ETS 300777-1:1997 |
|
DIN ETS 300777-3 |
Terminal Equipment (TE) - End-to-end protocols for multimedia information retrieval services - Part 3: Application Programmable Interface (API) for MHEG-5; English version ETS 300777-3:1997 |
|
DIN IEC 100/1210/NP |
(DRAFT) Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing (IEC 100/1210/NP:2007) |
|
DIN IEC 60050-102 |
(DRAFT) International Electrotechnical Vocabulary - Part 102: Mathematics: General concepts and linear algebra (IEC 1/1953/CDV:2005) |
|
DIN IEC 60050-111/A1 |
(DRAFT) Amendment 1 to IEC 60050-111:1996 - International Electrotechnical Vocabulary (IEV) - Part 111: Physics and chemistry - Time-related concepts (IEC 1/1915/CDV:2003) |
|
DIN IEC 60050-131/A1 |
(DRAFT) International Electrotechnical Vocabulary - Part 131: Circuit theory (IEC 1/2014/CDV:2006) |
|
DIN IEC 60050-221/A3 |
(DRAFT) International Electrotechnical Vocabulary - Amendment 3 to Chapter 221: Magnetic materials and components (IEC 1/1931/CDV:2004) |
|
DIN IEC 60050-461 |
(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005) |
|
DIN IEC 60050-461 |
(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005) |
|
DIN IEC 60050-461 |
(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005) |
|
DIN IEC 60050-471 |
(DRAFT) International Electrotechnical Vocabulary - Part 471: Insulators (IEC 1/1956/CDV:2005) |
|
DIN IEC 60050-617 |
(DRAFT) International Electrotechnical Vocabulary - Part 617: Organisation/market of electricity (IEC 1/1999/CDV:2006) |
|
DIN IEC 60050-851 |
(DRAFT) International Electrotechnical Vocabulary - Part 851: Electric welding (IEC 1/1990/CDV:2006) |
|
DIN IEC 60191-1 |
(DRAFT) Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices (IEC 47D/607A/CD:2005) |
|
DIN IEC 60191-6-14 |
(DRAFT) Mechanical standardization of semiconductor devices - Part 6-14: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) (IEC 47D/671/CD:2006) |
|
DIN IEC 60191-6-15 |
(DRAFT) Mechanical standardization of semiconductor devices - Part 6-15: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) (IEC 47D/673/CD:2006) |
|
DIN IEC 60235-1 |
Measurement of the Electrical Properties of Microwave Tubes; Part 1: Terminologie |
|
DIN IEC 60300-3-4 |
(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005) |
|
DIN IEC 60640 |
CAMAC-serial highway interface system; identical with IEC 60640, eidtion 1979 (as of 1984) |
|
DIN IEC 60677 |
Block transfers in CAMAC systems; identical with IEC 60677, edition 1980 |
|
DIN IEC 60713 |
Subroutines for CAMAC |
|
DIN IEC 60729 |
Multiple controllers in a CAMAC crate; identical with IEC 60729, edition 1982 |
|
DIN IEC 60743/A1 |
(DRAFT) Live working - Terminology for tools, equipment and devices (IEC 78/666/CD:2006) |
|
DIN IEC 60775 |
Real-time BASIC for CAMAC; identical with IEC 60775, edition 1983 |
|
DIN IEC 60880 |
Software for computers in the safety systems of nuclear power stations; identical with IEC 60880, edition 1986 |
|
DIN IEC 61298-1 |
(DRAFT) Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 65B/575/CD:2005) |
|
DIN IEC 61375-2 |
(DRAFT) Electric railway equipment - Train bus - Part 2: Train communication network conformance testing (IEC 9/756/CD:2003); Text in English |
|
DIN IEC 61649 |
(DRAFT) Weibull analysis - Goodness-of-fit tests and confidence intervals for Weibull distributed data (IEC 56/952/CD:2004) |
|
DIN IEC 61784-2 |
(DRAFT) Digital data communications for measurement and control - Part 2: Additional profiles for ISO/IEC 8802-3 based communication networks in real-time applications (IEC 65C/350/CD:2004), text in English |
|
DIN IEC 61970-302 |
(DRAFT) Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) financial, energy scheduling and reservations (IEC 57/445/CD:1999), text English |
|
DIN IEC 61970-402 |
(DRAFT) EMS-API - Part 402: Component interface specification (CIS) - Common services (IEC 57/768/CD:2005), text in English |
|
DIN IEC 61970-403 |
(DRAFT) EMS-API - Part 403: Component Interface Specification (CIS) - Generic data access (IEC 57/769/CD:2005), text in English |
|
DIN IEC 61970-404 |
(DRAFT) EMS-API - Part 404: Component Interface Specification (CIS) - High speed data access (IEC 57/770/CD:2005), text in English |
|
DIN IEC 61970-405 |
(DRAFT) EMS-API - Part 405: Component Interface Specification (CIS) - Generic eventing and subscription (IEC 57/771/CD:2005), text in English |
|
DIN IEC 61970-407 |
(DRAFT) EMS-API - Part 407: Component Interface Specification (CIS) - Time series data access (IEC 57/772/CD:2005), text in English |
|
DIN IEC 61970-453 |
(DRAFT) Energy management system application program interface (EMS-API) - Part 453: CIM based graphics exchange, text in English (IEC 57/820/CD:2006) |
|
DIN IEC 61994-1 |
(DRAFT) Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 1: Piezoelectric and dielectric resonators (IEC 49/755/CD:2006) |
|
DIN IEC 61994-4-1 |
(DRAFT) Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (IEC 49/756/CD:2006) |
|
DIN IEC 61994-4-4 |
(DRAFT) Piezoelectric and dielectric devices for frequency control and selection - glossary - Part 4-4: Materials - Materials for SAW devices (IEC 49/642/CD:2004) |
|
DIN IEC 62223 |
(DRAFT) Insulators - Glossary of terms (IEC 36/243/CD:2005) |
|
DIN IEC 62227 |
(DRAFT) Multimedia home server systems - Digital rights permission code (IEC 100/1160/CD:2006) |
|
DIN IEC 62239 |
(DRAFT) Process Management for Avionics - Technical specification for preparing an electronic components management plan (IEC 107/18/CD:2002) |
|
DIN IEC 62264-1 |
(DRAFT) Enterprise-control system integration - Part 1: Models and terminology (IEC 62264-1:2003, text in English) |
|
DIN IEC 62264-2 |
(DRAFT) Enterprise-control system integration - Part 2: Model object attributes (IEC 65A/366/CDV:2002), text in English |
|
DIN IEC 62341-2 |
(DRAFT) Organic Light Emitting Diode Displays - Part 2: Terminology (IEC 110/20/CD:2004) |
|
DIN IEC 62382 |
(DRAFT) Electrical and instrumentation loop check (IEC PAS 62382:2004), text in English |
|
DIN IEC 62396 |
(DRAFT) Process management for avionics industry - Standard for the accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment (IEC 107/29/CD:2004) |
|
DIN IEC 62439 |
(DRAFT) Digital data communication for measurement and control - High availability automation networks (IEC 65C/447/CD:2006), text in English |
|
DIN IEC 62448 |
(DRAFT) Multimedia systems and equipment - Multimedia e-publishing and e-books - Generic format for e-publishing (IEC 100/1017/DC:2005) |
|
DIN IEC 80000-14 |
(DRAFT) Quantities and units - Part 14: Telebiometrics related to human Physiology (IEC 25/323/CD:2006) |
|
DIN ISO 10002 |
Quality management - Customer satisfaction - Guidelines for complaints handling in organizations (ISO 10002:2004) |
|
DIN ISO 10209-2 |
Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods; identical with ISO 10209-2:1993 |
|
DIN ISO 10209-4 |
Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation (ISO 10209-4:1999) |
|
DIN ISO 10374 |
Freight containers - Automatic identification (ISO 10374:1991, including Amendment 1:1995) |
|
DIN ISO 10782-1 |
Definitions and attributes of data elements for control and monitoring of textile processes - Part 1: Spinning, spinning preparatory and related processes (ISO 10782-1:1998) |
|
DIN ISO 11074 |
(DRAFT) Soil quality - Vocabulary (ISO/FDIS 11074:2005) |
|
DIN ISO 11074-1 |
Soil quality - Vocabulary - Part 1: Terms and definitions relating to the protection and pollution of the soil (ISO 11074-1:1996) |
|
DIN ISO 11090-1 |
Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type) (ISO 11090-1:1998) |
|
DIN ISO 11090-2 |
Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 2: Two column machines (slide-head type and cross slide table type) (ISO 11090-2:1998) |
|
DIN ISO 11451-1 |
Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy; Vehicle test methods - Part 1: General and definitions (ISO 11451-1:1995 + Technical Corrigendum 1:1996) |
|
DIN ISO 11453 |
Statistical interpretation of data - Tests and confidence intervals relating to proportions (ISO 11453:1996 including Technical Corrigendum 1:1999) |
|
DIN ISO 11620 |
Information and documentation - Library performance indicators (ISO 11620:1998) |
|
DIN ISO 11648-1 |
Statistical aspects of sampling from bulk materials - Part 1: General principles (ISO 11648-1:2003) |
|
DIN ISO 11675 |
Textile machinery and acessories - Flatbed knitting machines - Vocabulary (ISO 11675:2005) |
|
DIN ISO 11676 |
Textile machinery and accessories - Chain links for warp knitting machines - Vocabulary and symbols (ISO 11676:1994) |
|
DIN ISO 11798 |
Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods (ISO 11798:1999) |
|
DIN ISO 11843-1 |
Capability of detection - Part 1: Terms and definitions (ISO 11843-1:1997, including Technical Corrigendum 1:2003) |
|
DIN ISO 11843-2 |
Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English) |
|
DIN ISO 11843-3 |
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used (ISO 11843-3:2003; text in German, English) |
|
DIN ISO 11843-4 |
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English) |
|
DIN ISO 11906 |
Micrographics - Microfilming of serials - Operating procedures (ISO 11906:1999) |
|
DIN ISO 12124 |
Procedures for the measurement of real-ear acoustical characteristics of hearing aids (ISO 12124:2001) |
|
DIN ISO 12165 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols (ISO 12165:2000) |
|
DIN ISO 128-22 |
Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
|
DIN ISO 128-23 |
Technical drawings - General principles of presentation - Part 23: Lines on construction drawings (ISO 128-23:1999) |
|
DIN ISO 128-24 |
Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings (ISO 128-24:1999) |
|
DIN ISO 128-25 |
Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings (ISO 128-25:1999) |
|
DIN ISO 128-34 |
Technical drawings - General principles of presentation - Part 34: Views on mechanical engineering drawings (ISO 128-34:2001) |
|
DIN ISO 128-40 |
Technical drawings - General principles of presentation - Part 40: Basic conventions for cuts and sections (ISO 128-40:2001) |
|
DIN ISO 128-44 |
Technical drawings - General principles of presentation - Part 44: Sections on mechanical engineering drawings (ISO 128-44:2001) |
|
DIN ISO 128-50 |
Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections (ISO 128-50:2001) |
|
DIN ISO 13473-2 |
Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002) |
|
DIN ISO 13528 |
(DRAFT) Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English |
|
DIN ISO 13990-1 |
Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 1: Vocabulary (ISO 13990-1:2006); Text in German, English and French |
|
DIN ISO 14500 |
Textile machinery and accessories - Harnesses for Jacquard weaving machines - Vocabulary (ISO 14500:2003) |
|
DIN ISO 15226 |
Technical product documentation - Life cycle model and allocation of documents (ISO 15226:1999) |
|
DIN ISO 15709 |
Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory (ISO 15709:2002) |
|
DIN ISO 16016 |
Technical product documentation - Protection notices for restricting the use of documents and products (ISO 16016:2000) |
|
DIN ISO 16854 |
Textile machinery - Ring twisting machines - Terms and definitions (ISO 16854:2004; text in German, English and French) |
|
DIN ISO 16875 |
Textile machinery - Ring spinning machines for cotton spinning - Terms and definitions, Principles of construction (ISO 16875:2004; text in German, English and French) |
|
DIN ISO 1891 |
(DRAFT) Fasteners - Terminology and nomenclature (ISO/DIS 1891:2007); Text in German, English and French |
|
DIN ISO 20252 |
Market, opinion and social research - Vocabulary and service requirements (ISO 20252:2006) |
|
DIN ISO 20725 |
Textile machinery - Condensers for cotton spinning - Vocabulary and principles of construction (ISO 20725:2004); text in German, English and French |
|
DIN ISO 20726 |
Textile machinery - Hopper feeders for cotton spinning - Vocabulary and principles of construction (ISO 20726:2004); text in German, English and French |
|
DIN ISO 20727 |
Textile machinery - Mixing bale openers for cotton spinning - Vocabulary and principles of construction (ISO 20727:2004); text in German, English and French |
|
DIN ISO 20727 Berichtigung 1 |
Textile machinery - Mixing bale openers for cotton spinning - Vocabulary and principles of construction (ISO 20727:2004); text in German, English and French, Corrigenda to DIN ISO 20727:2006-01 |
|
DIN ISO 21485 |
Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction (ISO 21485:2006); Text in German and English |
|
DIN ISO 22222 |
Personal financial planning - Requirements for personal financial planners (ISO 22222:2005) |
|
DIN ISO 2395 |
Test sieves and test sieving - Vocabulary (ISO 2395:1990) |
|
DIN ISO 2806 |
Industrial automation systems - Numerical control of machines - Vocabulary |
|
DIN ISO 2859-3 |
(DRAFT) Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005) |
|
DIN ISO 2859-4 |
Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002) |
|
DIN ISO 3308 |
Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000) |
|
DIN ISO 3536 |
Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:1999) |
|
DIN ISO 3918 |
Agricultural machinery - Milking installations - Vocabulary (ISO 3918:1996) |
|
DIN ISO 3952-1 |
Simplified representation for kinematics - Part 1: Representation of motion of links; identical with ISO 3952-1:1981 |
|
DIN ISO 3952-2 |
Simplified representation for kinematics - Part 2: Representation of friction and gear mechanisms and cam mechanisms; identical with ISO 3952-2:1981 |
|
DIN ISO 3952-3 |
Simplified representation for kinematics - Part 3: Representation of geneva and ratchet mechanisms, couplings and brakes; identical with ISO 3952-3:1979 |
|
DIN ISO 3952-4 |
Simplified representation for kinematics - Part 4: Miscellaneous mechanisms and their components; identical with ISO 3952-4:1984 |
|
DIN ISO 4378-1 |
Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties (ISO 4378-1:1997) |
|
DIN ISO 4378-2 |
Plain bearings - Terms, definitions and classification - Part 2: Friction and wear (ISO 4378-2:1983) |
|
DIN ISO 4378-3 |
Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983) |
|
DIN ISO 4378-4 |
Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol (ISO 4378-4:1997) |
|
DIN ISO 5247-1 |
Textile machinery and accessories - Weaving machines - Part 1: Classification and vocabulary (ISO 5247-1:2004) |
|
DIN ISO 5247-1 Berichtigung 1 |
Textile machinery and accessories - Weaving machines - Part 1: Classification and vocabulary (ISO 5247-1:2004), Corrigenda to DIN ISO 5247-1:2005-05 (ISO 5247-1:2004/Cor. 1:2006, Text in German, English, French) |
|
DIN ISO 5247-3 |
Textile machinery and accessories - Weaving machines - Part 3: Parts of the machine, vocabulary (ISO 5247-3:1993) |
|
DIN ISO 5248 |
Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary of ancillary devices (ISO 5248:2003) |
|
DIN ISO 5250 |
Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery (ISO 5250:2003) |
|
DIN ISO 5261 |
Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
|
DIN ISO 5456-1 |
Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996) |
|
DIN ISO 5845-1 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995) |
|
DIN ISO 6289 |
Skis - Vocabulary (ISO 6289:2003) |
|
DIN ISO 6411 |
Technical drawings - Simplified representation of centre holes (ISO 6411:1982) |
|
DIN ISO 6428 |
Technical drawings - Requirements for microcopying (ISO 6428:1982) |
|
DIN ISO 6630 |
Documentation - Bibliographic control characters (ISO 6630:1986) |
|
DIN ISO 7152 |
Camping tents and caravan awnings - Vocabulary and list of equivalent terms (ISO 7152:1997) |
|
DIN ISO 7839 |
Textile machinery and accessories - Knitting machines - Vocabulary and classification (ISO 7839:2005); text in German, English and French |
|
DIN ISO 7967-2 |
Reciprocating internal combustion engines; vocabulary of components and systems; main running gear; identical with ISO 7967-2:1987 |
|
DIN ISO 7967-3 |
Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987 |
|
DIN ISO 8090 |
Cycles - Terminology; Identical with ISO 8090:1990 |
|
DIN ISO 857-2 |
Welding and allied processes - Vocabulary - Part 2: Soldering and brazing processes and related terms (ISO 857-2:2005) |
|
DIN ISO 8640-2 |
Textile machinery and accessories - Flat warp knitting machines - Part 2: Vocabulary of warp let-off, fabric take-up and batching (ISO 8640-2:2004; text in German, English, French) |
|
DIN ISO 8640-3 |
Textile machinery and accessories - Flat warp knitting machines - Part 3: Vocabulary of patterning devices (ISO 8640-3:2002) |
|
DIN ISO 9022-1 |
Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing (ISO 9022-1:1994) |
|
DIN ISO 9069 |
Information processing; SGML support facilities; SGML document interchange format (SDIF); identical with ISO 9069:1988 |
|
DIN ISO 9211-1 |
Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994) |
|
DIN ISO 9735-1 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 1: Syntax rules common to all parts (ISO 9735-1:2002) |
|
DIN ISO 9735-10 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 10: Syntax service directories (ISO 9735-10:2002) |
|
DIN ISO 9735-2 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 2: Syntax rules specific to batch EDI (ISO 9735-2:2002) |
|
DIN ISO 9735-3 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 3: Syntax rules specific to interactive EDI (ISO 9735-3:2002) |
|
DIN ISO 9735-4 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 4: Syntax and service report message for batch EDI (message type - CONTRL) (ISO 9735-4:2002) |
|
DIN ISO 9735-6 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 6: Secure authentication and acknowledgement message (message type - AUTACK) (ISO 9735-6:2002) |
|
DIN ISO 9735-7 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 7: Security rules for batch EDI (confidentiality) (ISO 9735-7:2002) |
|
DIN ISO 9735-8 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 8: Associated data in EDI (ISO 9735-8:2002) |
|
DIN ISO 9735-9 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 9: Security key and certificate management message (message type - KEYMAN) (ISO 9735-9:2002) |
|
DIN ISO 9947 |
Textile machinery and accessories - Two-for-one twisters - Vocabulary (ISO 9947:2005) |
|
DIN ISO 9957-2 |
Fluid draughting media - Part 2: Water-based non-India ink - Requirements and test conditions (ISO 9957-2:1995) |
|
DIN ISO 9957-3 |
Fluid draughting media - Part 3: Water-based coloured draughting inks - Requirements and test conditions (ISO 9957-3:1997) |
|
DIN ISO/TS 14822-1 |
Traffic and Travel Information - General specifications for medium-range pre-information via dedicated short-range communication - Part 1: Downlink (ISO/TS 14822-1:2006); English version CEN ISO/TS 14822-1:2006 |
|
DIN ISO/TS 14907-1 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2005); English version CEN ISO/TS 14907-1:2005 |
|
DIN ISO/TS 14907-2 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2006); English version CEN ISO/TS 14907-2:2006 |
|
DIN ISO/TS 17261 |
Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology (ISO/TS 17261:2005); English version CEN ISO/TS 17261:2005 |
|
DIN ISO/TS 17261 Berichtigung 1 |
Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology (ISO/TS 17261:2005); English version CEN ISO/TS 17261:2005, Corrigenda to DIN ISO/TS 17261:2005-09; English version CEN ISO/TS 17261:2005/AC:2006 |
|
DIN ISO/TS 17262 |
Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures (ISO/TS 17262:2003); English version CEN ISO/TS 17262:2003 |
|
DIN ISO/TS 17263 |
Automatic vehicle and equipment identification - Intermodal goods transport - System parameters (ISO/TS 17263:2003); English version CEN ISO/TS 17263:2003 |
|
DIN ISO/TS 17573 |
Road Transport and Traffic Telematics - Electronic Fee Collection (EFC) - Systems architecture for vehicle related transport services (ISO/TS 17573:2003); English version CEN ISO/TS 17573:2003 |
|
DIN ISO/TS 17574 |
Road transport and traffic telematics - Electronic Fee Collection (EFC) - Guidelines for EFC security protection profiles (ISO/TS 17574:2004); English version CEN ISO/TS 17574:2004 |
|
DIN ISO/TS 18234-1 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 1: Introduction, Numbering and Versions (ISO/TS 18234-1:2006); English version CEN ISO/TS 18234-1:2006 |
|
DIN ISO/TS 18234-2 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF) (ISO/TS 18234-2:2006); English version CEN ISO/TS 18234-2:2006 |
|
DIN ISO/TS 18234-3 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application (ISO/TS 18234-3:2006); English version CEN ISO/TS 18234-3:2006 |
|
DIN ISO/TS 18234-4 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 4: Road Traffic Message (RTM) application (ISO/TS 18234-4:2006); English version CEN ISO/TS 18234-4:2006 |
|
DIN ISO/TS 18234-5 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006); English version CEN ISO/TS 18234-5:2006 |
|
DIN ISO/TS 18234-6 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 6: Location referencing applications (ISO/TS 18234-6:2006); English version CEN ISO/TS 18234-6:2006 |
|
DIN V 30745 |
Radio-frequency identification of waste containers by transponder technology; text German and English |
|
DIN V 44302-2 |
Data communication; terms |
|
DIN V 66291-2 |
Chip cards with digital signature application/function according to SigG and SigV - Part 2: Personalisation processes |
|
DIN V 66291-3 |
Chip cards with digital signature application/function according to SigG and SigV - Part 3: Commands for personalisation |
|
DIN V 66291-4 |
Chip cards with digital signature application/function according to SigG and SigV - Part 4: Basic security services |
|
DIN V 66400 |
Finger minutiae encoding format and parameters for on-card matching |
|
DIN V ENV 12017 |
Medical Informatics - Medical Informatics Vocabulary (MIVoc); English version ENV 12017:1997 |
|
DIN V ENV 12018 |
Identification, administrative, and common clinical data structure for intermittently connected devices used in healthcare (including machine readable cards); English version ENV 12018:1997 |
|
DIN V ENV 12204 |
Avanced manufacturing technology - Systems architecture - Constructs for enterprise modelling; English version ENV 12204:1996 |
|
DIN V ENV 12388 |
Medical informatics - Algorithm for digital signature services in health care; English version ENV 12388:1996 |
|
DIN V ENV 12443 |
Medical informatics - Healthcare Information Framework (HIF); English version ENV 12443:1999 |
|
DIN V ENV 12537-1 |
Medical informatics - Registration of information objects used for EDI in healthcare - Part 1: The register; English version ENV 12537-1:1997 |
|
DIN V ENV 12537-2 |
Medical informatics - Registration of information objects used for EDI in healthcare - Part 2: Procedures for the registration of information objects used for electronic data interchange (EDI) in healthcare; English version ENV 12537-2:1997 |
|
DIN V ENV 12611 |
Medical informatics - Categorial structure of systems of concepts - Medical devices; English version ENV 12611:1997 |
|
DIN V ENV 12612 |
Medical informatics - Messages for the exchange of healthcare administrative information; English version ENV 12612:1997 |
|
DIN V ENV 12967-1 |
Medical informatics - Healthcare Information System Architecture (HISA) - Part 1: Healthcare Middleware Layer; English version ENV 12967-1:1998 |
|
DIN V ENV 13606-2 |
Health informatics - Electronic healthcare record communication - Part 2: Domain term list; English version ENV 13606-2:2000 |
|
DIN V ENV 13606-4 |
Health informatics - Electronic healthcare record communication - Part 4: Messages for the exchange of information; English version ENV 13606-4:2000 |
|
DIN V ENV 13607 |
Health informatics - Messages for the exchange of information on medicine prescriptions; English version ENV 13607:2000 |
|
DIN V ENV 13608-1 |
Health informatics - Security for healthcare communication - Part 1: Concepts and terminology; English version ENV 13608-1:2000 |
|
DIN V ENV 13608-2 |
Health informatics - Security for healthcare communication - Part 2: Secure data objects; English version ENV 13608-2:2000 |
|
DIN V ENV 13608-3 |
Health informatics - Security for healthcare communication - Part 3: Secure data channels; English version ENV 13608-3:2000 |
|
DIN V ENV 13609-2 |
Health informatics - Messages for maintenance of supporting information in healthcare systems - Part 2: Updating of medical laboratory-specific information; English version ENV 13609-2:2000 |
|
DIN V ENV 13712 |
Postal services - Forms - Harmonised vocabulary; German version ENV 13712:2000 |
|
DIN V ENV 13730-1 |
Health informatics - Blood transfusion related messages - Part 1: Subject of care related messages; English version ENV 13730-1:2001 |
|
DIN V ENV 13730-2 |
Healthcare Informatics - Blood transfusion related messages - Part 2: Product related messages (BTR-PROD); German version ENV 13730-2:2002, Text English |
|
DIN V ENV 13734 |
Health informatics - Vital signs information representation; English version ENV 13734:2000 |
|
DIN V ENV 13735 |
Health informatics - Interoperability of patient connected medical devices; English version ENV 13735:2000 |
|
DIN V ENV 13777 |
Road transport and traffic telematics - DATEX specifications for data exchange between traffic and travel information centres (version 1.2a); English version ENV 13777:2000 |
|
DIN V ENV 14062-1 |
Identification card systems - Surface transport applications; Electronic fee collection - Part 1: Physical characteristics, electronic signals and transmission protocols; English version ENV 14062-1:2001 |
|
DIN V ENV 14062-2 |
Identification card systems - Surface transport applications; Electronic fee collection - Part 2: Message requirements; English version ENV 14062-2:2001 |
|
DIN V ENV 14232 |
Advanced technical ceramics - Terms, definitions and abbreviations; Trilingual version ENV 14232:2003 |
|
DIN V ENV ISO 14904 |
Road transport and traffic telematics - Electronic fee collection (EFC) - Interface specification for clearing between operators (ISO/TS 14904:2002); English version ENV ISO 14904:2002 |
|
DIN-Fachbericht 121 |
Guidelines for the justification and development of management system standards; German and English version ISO Guide 72 |
|
DIN-Fachbericht 141 |
CleANopen - Application profile for municipal vehicles based on DIN EN 50325-4 |
|
DIN-Fachbericht 54 |
Environmental aspects - Inclusion in electrotechnical product standards; German and English version |
|
DIN-Fachbericht 59 |
Guide for the inclusion of environmental aspects in product standards |
|
DIN-Fachbericht CEN ISO/TR 11610 |
Protective clothing - Vocabulary (ISO/TR 11610:2004) |
|
DIN-Fachbericht CEN/TR 14599 |
Terms and definitions for welding purposes in relation with EN 1792; Trilingual version CEN/TR 14599:2005 |
|
DIN-Fachbericht CEN/TR 15349 |
Hardware for furniture - Terms for extension elements and their components; Trilingual version CEN/TR 15349:2006 |
|
DIN-Fachbericht ISO/TR 10017 |
Guidance on statistical techniques for ISO 9001:2000 |