|
DIN EN ISO 252-1 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999) |
|
DIN EN ISO 283-1 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000); English version of DIN EN ISO 283-1 |
|
DIN EN ISO 284 |
Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2003) |
|
DIN EN ISO 2860 |
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
|
DIN EN ISO 3095 |
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO 3095:2005) |
|
DIN EN ISO 3381 |
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
|
DIN EN ISO 3715-1 |
Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002) |
|
DIN EN ISO 3715-2 |
Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001) |
|
DIN EN ISO 3796 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999); English version of DIN EN ISO 3796 |
|
DIN EN ISO 505 |
Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999); English version ofDIN EN ISO 505 |
|
DIN EN ISO 5778 |
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); English version of DIN EN ISO 5778 |
|
DIN EN ISO 583-1 |
Conveyor belts with a textile carcass - Total thickness and thickness of elements - Part 1: Methods of test (ISO 583-1:1999); English version of DIN EN ISO 583-1 |
|
DIN EN ISO 613 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); English version of DIN EN ISO 613 |
|
DIN EN ISO 6185-1 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
|
DIN EN ISO 6185-2 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
|
DIN EN ISO 6185-3 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001) |
|
DIN EN ISO 6218 |
Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO 6218:2005) |
|
DIN EN ISO 6682 |
Zones of comfort and reach for controls for earth-moving machinery (ISO 6682:1986, including Amendment 1:1989) |
|
DIN EN ISO 6683 |
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
|
DIN EN ISO 694 |
Ships and marine technology - Positioning of magnetic compasses in ships (ISO 694:2000); English version of DIN EN ISO 694 |
|
DIN EN ISO 703-1 |
Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999); English version of DIN EN ISO 703-1 |
|
DIN EN ISO 7547 |
Ships and marine technology - Air-conditioning and ventilation of accomodation spaces - Design conditions and basis of calculations (ISO 7547:2002) |
|
DIN EN ISO 7590 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001); English version of DIN EN ISO 7590 |
|
DIN EN ISO 7622-1 |
Longitudinal traction test on steel cord conveyor belts - Measurement of elongation (ISO 7622-1:1984) |
|
DIN EN ISO 7622-2 |
Longitudinal traction test on steel cord conveyor belts - Measurement of tensile strength (ISO 7622-2:1984) |
|
DIN EN ISO 7623 |
Steel cord conveyor belts - Cord-to-coating bond test - Testing in initial state and after thermal treatment (ISO 7623:1996) |
|
DIN EN ISO 7840 |
Small craft - Fire resistant fuel hoses (ISO 7840:2004) |
|
DIN EN ISO 8092-2 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) |
|
DIN EN ISO 8092-3 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
|
DIN EN ISO 8092-4 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997) |
|
DIN EN ISO 8099 |
Small craft - Toilet waste retention systems (ISO 8099:2000); English version of DIN EN ISO 8099 |
|
DIN EN ISO 8384 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000); Trilingual version EN ISO 8384:2001 |
|
DIN EN ISO 8385 |
Ships and marine technology - Dredgers - Classification (ISO 8385:1999); English version of DIN EN ISO 8385 |
|
DIN EN ISO 8469 |
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006) |
|
DIN EN ISO 8665 |
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006) |
|
DIN EN ISO 8666 |
Small craft - Principal data (ISO 8666:2002) |
|
DIN EN ISO 8728 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997) |
|
DIN EN ISO 8729 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997) |
|
DIN EN ISO 8847 |
Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004) |
|
DIN EN ISO 8849 |
Small craft - Electrically-operated direct-current bilge pumps (ISO 8849:2003) |
|
DIN EN ISO 8861 |
Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998) |
|
DIN EN ISO 9093-1 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic components (ISO 9093-1:1997) |
|
DIN EN ISO 9093-2 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
|
DIN EN ISO 9094-1 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
|
DIN EN ISO 9094-2 |
Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002) |
|
DIN EN ISO 9097 |
Small craft - Electric fans (ISO 9097:1991) |
|
DIN EN ISO 9785 |
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required (ISO 9785:2002) |
|
DIN EN ISO 9856 |
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003) |
|
DIN EN ISO 9875 |
Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000) |
|
DIN EN ISO 9876 |
Ships and marine technology - Marine facsimile receivers for meteorological charts (ISO 9876:1997) |
|
DIN ETS 300067/A1 |
Radio equipment and systems (RES) - Radiotelex equipment operating in the maritime MF/HF service - Technical characteristics and methods of measurement; English version ETS 300067:1990/A1:1993 |
|
DIN ETS 300441 |
Radio Equipment and Systems (RES) - Technical characteristics and methods of measurement for maritime radiotelephone watch receivers for the distress and calling frequency 2182 kHz; English version ETS 300441:1996 |
|
DIN IEC 80/266/CD |
(DRAFT) Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Operational and performance requirements; methods of testing and required test results (IEC 80/266/CD:2000) |
|
DIN ISO 15370 |
Ships and marine technology - Low-location lighting on passenger ships - Arrangement (ISO 15370:2001) |
|
DIN ISO 2345 |
Road vehicles - M18 x 1,5 spark-plugs with conical seating and their cylinder housing (ISO 2345:1994) |
|
DIN ISO 2347 |
Road vehicles - M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing (ISO 2347:1994) |
|
DIN ISO 2697 |
Diesel engines - Fuel nozzles - Size |
|
DIN ISO 2699 |
Diesel engines - Flange-mounted fuel injectors, size |
|
DIN ISO 2923 |
Acoustics - Measurement of noise on board vessels (ISO 2923:1996 + Technical Corrigendum 1:1997) |
|
DIN ISO 3536 |
Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:1999) |
|
DIN ISO 3538 |
Road vehicles - Safety glazing materials - Test methods for optical properties (ISO 3538:1997) |
|
DIN ISO 3553-2 |
Road vehicles - High tension connectors for ignition coils and distributors - Part 2: Plug-types (ISO 3553-2:1997) |
|
DIN ISO 3917 |
Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering (ISO 3917:1999) |
|
DIN ISO 6518-2 |
Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods (ISO 6518-2:1995 + Corr 1:1997) |
|
DIN ISO 6550-1 |
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 1: M14 x 1,25 glow-plugs (ISO 6550-1:1994) |
|
DIN ISO 6582 |
Shipbuilding; information processing; numerical control of machines; ESSI format; identical with ISO 6582, edition 1983 |
|
DIN ISO 6954 |
Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships (ISO 6954:2000) |
|
DIN ISO 7460 |
Shipbuilding; information processing; shiplines; identification geometric data; identical with ISO 7460, edition 1983 |
|
DIN ISO 7461 |
Shipbuilding; information processing; shiplines; numerical representation of elements of the hull geometry; identical with ISO 7461, edition 1984 |
|
DIN ISO 7612 |
Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions (ISO 7612:1994) |
|
DIN ISO 7648 |
Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances (ISO 7648:1987) |
|
DIN ISO 7838 |
Shipbuilding; information processing; shiplines; formats and data organization; identical with ISO 7838, edition 1984 |
|
DIN ISO 8090 |
Cycles - Terminology; Identical with ISO 8090:1990 |
|
DIN ISO 8123 |
Road vehicles - Diametral pitch starter motor pinions (ISO 8123:1991) |
|
DIN ISO 8277 |
Shipbuilding; information processing; pipework; information transfer; identical with ISO 8277:1988 |
|
DIN ISO 8856 |
Road vehicles - Electrical performance of starter motors - Test methods and general requirements (ISO 8856:1995) |
|
DIN ISO 8936 |
Caravan awnings - Safety requirements (ISO 8936:2003) |
|
DIN ISO 9203-1 |
Shipbuilding; information processing; topology of ship hull structure elements; location of elements; identical with ISO 9203-1:1989 |
|
DIN ISO 9203-2 |
Shipbuilding; information processing; topology of ship hull structure elements; description of elements; identical with ISO 9203-2:1989 |
|
DIN ISO 9203-3 |
Shipbuilding; information processing; topology of ship hull structure elements; relations of elements; identical with ISO 9203-3:1989 |
|
DIN ISO 9457-1 |
Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions (ISO 9457-1:1991) |
|
DIN ISO 9457-2 |
Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994) |
|
DIN ISO/TS 14822-1 |
Traffic and Travel Information - General specifications for medium-range pre-information via dedicated short-range communication - Part 1: Downlink (ISO/TS 14822-1:2006); English version CEN ISO/TS 14822-1:2006 |
|
DIN ISO/TS 14907-2 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2006); English version CEN ISO/TS 14907-2:2006 |
|
DIN V 81841 |
Anchor chain cables grade K4 - Requirements and test |
|
DIN V 81846 |
Anchor chain cables grade K4 - Assembly, proof- and breaking forces |
|
DIN V 81847 |
Anchor chain cables grade K4 - Shots of chaim cable |
|
DIN V 81848 |
Anchor chain cables grade K4 - Common links |
|
DIN V 81849 |
Anchor chain cables grade K4 - Enlarged links |
|
DIN V 81850 |
Anchor chain cables grade K4 - End links |
|
DIN V 81852 |
Anchor chain cables grade K4 - End shackles |
|
DIN V 81853 |
Anchor chain cables grade K4 - Swivel shackles |
|
DIN V 81854 |
Anchor chain cables grade K4 - Three link adapter pieces |
|
DIN V 81855 |
Anchor chain cables grade K4 - Chain outboard shots |
|
DIN V 81856 |
Anchor chain cables grade K4 - Slip stoppers |
|
DIN-Fachbericht 141 |
CleANopen - Application profile for municipal vehicles based on DIN EN 50325-4 |