|
EEMUA EEMUA INDEX |
SUMMARY LIST OF CURRENT EEMUA PUBLICATIONS |
|
EEMUA PUB NO 101 |
Lifting Points A Design Guide |
|
EEMUA PUB NO 104 |
Noise A Guide to Information Required from Equipment Vendors |
|
EEMUA PUB NO 105 |
Factory Stairways, Ladders and Handrails (Including Access Platforms and Ramps)-Completely Reviewed and Rewritten 1994 and 2002 |
|
EEMUA PUB NO 105 |
Factory Stairways, Ladders and Handrails (Including Access Platforms and Ramps)-Completely Reviewed and Rewritten 1994 - Amendments Since 1966 Reprint |
|
EEMUA PUB NO 132 |
Specification for Three-Phase Cage Induction Motors-Formerly ECMA ELEC 1: Amendment 1; March 2002 |
|
EEMUA PUB NO 133 |
Specification for Underground Armoured Cable Protected Against Solvent Penetration and Corrosive Attack-Formaly OCMA Specification ELEC 4 |
|
EEMUA PUB NO 138 |
Design and Installation of On-Line Analyser Systems-Formaly OCMA INP- 3 |
|
EEMUA PUB NO 138 S1 |
Design and Installation of On-Line Analyser Systems - A Guide to Technical Enquiry and Bid Evaluation |
|
EEMUA PUB NO 140 |
Noise Procedure Specification-Formaly OCMA Specification No. NWG 1, Revision 2 |
|
EEMUA PUB NO 141 |
Guide to the Use of Noise Procedure Specification-Formaly OCMA Publication No. NWG 3, Revision 2 |
|
EEMUA PUB NO 143 |
Recommendations for Tube End Welding: Tubular Heat Transfer Equipment (Part 1 - Ferrous Materials)-Formerly OCMA Specification No. TEW 1 |
|
EEMUA PUB NO 144 |
90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Tubes Seamless and Welded |
|
EEMUA PUB NO 145 |
90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Flanges Composite and Solid |
|
EEMUA PUB NO 146 |
90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Fittings |
|
EEMUA PUB NO 147 |
Recommendations for the Design and Construction of Refrigerated Liquefied Gas Storage Tanks |
|
EEMUA PUB NO 148 |
Reliability Specification - Model Clauses for Inclusion in Purchasing Specifications for Equipment Items and Packages |
|
EEMUA PUB NO 149 |
Code of Practice for the Identification and Checking of Materials of Construction in Pressure Systems in Process Plants |
|
EEMUA PUB NO 151 |
Liquid Ring Vacuum Pumps and Compressors |
|
EEMUA PUB NO 153 |
Process Piping-Supplement to ASME B31.3 - 1996 Edition, Amendment February 2002 |
|
EEMUA PUB NO 154 |
GUIDANCE TO OWNERS ON DEMOLITION OF VERTICAL CYLINDRICAL STEEL STORAGE TANKS AND STORAGE SPHERES-Second Edition |
|
EEMUA PUB NO 155 |
Standard Test Method for Comparative Performance of Flammable Gas Detectors Against Poisoning |
|
EEMUA PUB NO 158 |
Construction Specification for Fixed Offshore Structures in the North Sea- Reprinted 1998 Incorporating Amendments 1 and 2 and Other Minor Emendations; Amendment 3, September 2000 |
|
EEMUA PUB NO 159 |
Users´ Guide to the Maintenance and Inspection of Above-Ground Vertical Cylindrical Steel Storage Tanks-Second Edition 1997 Incorporating Amendment No 1 and Minor Textual Corrections |
|
EEMUA PUB NO 159 |
USERS´ GUIDE TO THE INSPECTION, MAINTENANCE AND REPAIR OF ABOVEGROU ND VERTICAL CYLINDRICAL STEEL STORAGE TANKS-Third Edition; Volume 1 and 2; Incorporating Corrigenda & Amendments No 1, February 2004; Corrigenda and Amendments No 2, January 2005 |
|
EEMUA PUB NO 161 |
Guide to the Selection and Assessment of Silencers and Acoustic Enclosers |
|
EEMUA PUB NO 164 |
Seal-Less Centrifugal Pumps: Class 1 |
|
EEMUA PUB NO 168 |
A Guide to the Pressure Testing of In-Service Pressurised Equipment |
|
EEMUA PUB NO 170 |
Specification for Production Testing of Valves Part 1 - Ball Valves-Reprinted 2001 Incorporating Amendments No 1, April 1996, and Other, Minor Changes |
|
EEMUA PUB NO 170 |
Specification for Production Testing of Valves Part 1 - Ball Valves-Amendment 1; April 1996 |
|
EEMUA PUB NO 171 |
Specification for Production Testing of Valves Part 2 - Plug Valves-Amendment 1; April 1996 |
|
EEMUA PUB NO 172 |
Specification for Production Testing of Valves Part 3 - Gate Valves-Amendment 1; January 1996 |
|
EEMUA PUB NO 173 |
Specification for Production Testing of Valves Part 4 - Butterfly and Globe Valves |
|
EEMUA PUB NO 175 |
EEMUA Code of Practice for Calibration and Checking Process Analysers- Formerly IP Code 340 |
|
EEMUA PUB NO 176 |
Specification for Structural Castings for Use Offshore |
|
EEMUA PUB NO 178 |
A Design Guide for the Electrical Safety of Instruments, Instrument/Control Panels and Control Systems |
|
EEMUA PUB NO 179 |
A Working Guide for Carbon Steel Equipment in Wet H2S Service (Developed Largely from Oil Refinery Experience) |
|
EEMUA PUB NO 180 |
Guide for Designers and Users on Frangible Roof Joints for Fixed Roof Storage Tanks |
|
EEMUA PUB NO 181 |
A Guide to Risk Based Assessments of in situ Large Ex ´e´ and Ex ´N´ Machines |
|
EEMUA PUB NO 181 |
A GUIDE TO RISK BASED ASSESSMENTS OF in situ LARGE Ex ´e´ and Ex ´N´ MACHINES-Errata |
|
EEMUA PUB NO 182 |
SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK-INCORPORATING INFORMATION SHEET NO 20: APPLICATION GUIDELINES; 2nd EDITION; Corrigenda: June 2004 |
|
EEMUA PUB NO 183 |
Guide for the Prevention of Bottom Leakage from Vertical , Cylindrical, Steel Storage Tanks-Amendment 1: January 2004 |
|
EEMUA PUB NO 184 |
Guide to the Isolation of Pressure Relieving Devices |
|
EEMUA PUB NO 185 |
Guide for Hot Tapping on Piping and Other Equipment |
|
EEMUA PUB NO 186 |
A Practitioner´s Handbook Electrical Installation, Inspection and Maintenance in Potententially Explosive Atmospheres Including Directives, Standards and Legislation, Equipment Types and Techniques Required and Used During Installation & Precommissioning |
|
EEMUA PUB NO 186 |
Practitioners Handbook Electrical Installation, Inspection and Maintenance |
|
EEMUA PUB NO 187 |
Analyser Systems a Guide to Maintenance Management |
|
EEMUA PUB NO 188 |
Guide for Establishing Operating Periods of Safety Valves-Update Sheet January 2004 |
|
EEMUA PUB NO 189 |
A Guide to Fieldbus Application for the Process Industry |
|
EEMUA PUB NO 190 |
Guide for the Design, Construction and Use of Mounded Horizontal Cylindrical Vessels for Pressurised Storage of LPG at Ambient Temperatures-Incorporating Errata: October 2003; Amendment No 1: November 2004; Reprinted 2005 |
|
EEMUA PUB NO 191 |
Alarm Systems - A Guide to Design, Management and Procurement |
|
EEMUA PUB NO 192 |
Guide for the Procurement of Valves for Low Temperature (Non-Cryogenic) Service |
|
EEMUA PUB NO 193 |
EEMUA Recommendations for the Training, Development, and Competency Assessment of Inspection Personnel |
|
EEMUA PUB NO 194 |
GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT-2nd Edition |
|
EEMUA PUB NO 195 |
Compendium of EEMUA Information Sheets on Topics Related to Pressure- Containing Equipment-Incorporating Amendment No 1, January 2000 |
|
EEMUA PUB NO 196 |
Valve Purchasers´ Guide to the European Pressure Equipment Directive- Amendment No. 1: 11/2000; Amendment No 2: 2/2002; Amendment No 3: 8/2002; Erratum: 8/2002 |
|
EEMUA PUB NO 197 |
Specification for the Fabrication of Non-Primary Structural Steelwork for Offshore Installations |
|
EEMUA PUB NO 199 |
On-Line Leak Sealing of Piping: Guide to Safety Considerations-Amendment 1: 11/2002 |
|
EEMUA PUB NO 200 |
Guide to the Specification, Installation and Maintenance of Spring Supports for Piping |
|
EEMUA PUB NO 201 |
PROCESS PLANT CONTROL DESKS UTILISING HUMAN-COMPUTER INTERFACES A GUIDE TO DESIGN, OPERATIONAL AND HUMAN INTERFACE ISSUES |
|
EEMUA PUB NO 203 |
GUIDE TO THE APPLICATION OF ISO 3183 PARTS 2 (1996) AND 3 (1999): PETROLEUM AND NATURAL GAS INDUSTRIES STEEL PIPES FOR PIPELINES TECHNICAL DELIVERY CONDITIONS |
|
EEMUA PUB NO 204 |
PIPING AND THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE: GUIDANCE FOR PLANT OWNERS/OPERATORS-Release: Version 1 |